Southwall Technologies Inc. 10-Q 04-03-2005


SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
__________________

FORM 10-Q
(MARK ONE)
 
x
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
For the quarterly period ended April 3, 2005
or
o
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
For the transition period from to
 

Commission File Number: 0-15930
___________________

SOUTHWALL TECHNOLOGIES INC.
(Exact name of registrant as specified in its charter)

 
Delaware
(State or other jurisdiction of incorporation or organization)
 
94-2551470
(I.R.S. Employer Identification Number)
 
 
 
 
 
 
 
3975 East Bayshore Road, Palo Alto, California
(Address of principal executive offices)
 
94303
(Zip Code)
 


Registrant's telephone number, including area code: (650) 962-9111
___________________
 
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x     No o

Indicate by check mark whether the registrant is an accelerated filer (as defined in Rule 12b-2 of the Exchange Act). Yes o    No x

As of May 2, 2005, there were 26,778,482 shares of the Registrant's Common Stock outstanding.
 



SOUTHWALL TECHNOLOGIES INC.

INDEX

   
Page
PART I - FINANCIAL INFORMATION
     
Item 1
 
 
3
 
4
 
5
 
6
Item 2
13
Item 3
19
Item 4
30
     
PART II - OTHER INFORMATION
     
Item 1
31
Item 2
31
Item 3
31
Item 4
31
Item 5
31
Item 6
31
 
32
 

PART I. FINANCIAL INFORMATION

Item 1—Financial Statements:
SOUTHWALL TECHNOLOGIES INC.
UNAUDITED CONDENSED CONSOLIDATED BALANCE SHEETS
(in thousands, except per share data)

   
April 3,
 
December 31,
 
ASSETS
 
  2005
 
2004
 
Current assets:
         
Cash and cash equivalents
 
$
4,519
 
$
4,547
 
Restricted cash
   
475
   
686
 
Accounts receivable, net of allowance for doubtful accounts of
             
$284 at April 3, 2005 and $292 at December 31, 2004
   
6,401
   
6,186
 
Inventories, net
   
8,363
   
8,355
 
Other current assets
   
2,354
   
1,757
 
Total current assets
   
22,112
   
21,531
 
Property, plant and equipment, net
   
19,596
   
21,110
 
Restricted cash loans
   
1,093
   
1,149
 
Other assets
   
1,130
   
1,157
 
Total assets
 
$
43,931
 
$
44,947
 
               
LIABILITIES, REDEEMABLE PREFERRED STOCK AND STOCKHOLDERS' EQUITY
             
               
Current liabilities:
             
Current portion of long term debt and capital leases
 
$
1,306
 
$
1,463
 
Line of credit
   
2,975
   
2,975
 
Accounts payable
   
2,536
   
2,544
 
Accrued compensation
   
1,001
   
1,378
 
Other accrued liabilities
   
6,164
   
6,643
 
Total current liabilities
   
13,982
   
15,003
 
Term debt and capital leases
   
10,468
   
11,644
 
Government grants advanced
   
475
   
505
 
Other long term liabilities
   
3,134
   
3,222
 
Total liabilities
   
28,059
   
30,374
 
               
Commitments and contingencies (Note 5)
             
               
Series A 10% cumulative preferred stock, $0.001 par value; $1.00
             
stated value; 5,000 shares authorized, 4,893 shares outstanding
             
(Liquidation preference $4,893)
   
4,810
   
4,810
 
               
Stockholders’ equity:
             
Common stock, $0.001 par value; 50,000 authorized, 26,778
             
and 26,488 shares outstanding at April 3, 2005 and
             
December 31, 2004, respectively
   
26
   
26
 
Capital in excess of par value
   
78,360
   
77,957
 
Accumulated other comprehensive income:
             
Cumulative translation adjustment
   
3,687
   
4,358
 
Deferred compensation
   
(132
)
 
-
 
Accumulated deficit
   
(70,879
)
 
(72,578
)
Total stockholders’ equity
   
11,062
   
9,763
 
               
Total liabilities, redeemable preferred stock and stockholders’ equity
 
$
43,931
 
$
44,947
 
 
See accompanying notes to unaudited condensed consolidated financial statements.

 
SOUTHWALL TECHNOLOGIES INC.
UNAUDITED CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
(in thousands, except per share data)
 
   
Three months ended
 
   
April 3,
 
March 28,
 
 
 
2005
 
2004
 
           
Net revenues
 
$
15,647
 
$
11,067
 
Cost of revenues
   
11,270
   
8,466
 
               
Gross profit
   
4,377
   
2,601
 
               
Operating expenses:
             
Research and development
   
696
   
810
 
Selling, general and administrative
   
2,026
   
3,063
 
Impairment recoveries for long-lived assets
   
(170
)
 
--
 
               
Total operating expense
   
2,552
   
3,873
 
               
Income (loss) from operations
   
1,825
   
(1,272
)
               
Interest expense, net
   
(271
)
 
(675
)
Cost of warrants issued
   
--
   
(4,818
)
Other income, net
   
292
   
430
 
Income (loss) before provision for income taxes
   
1,846
   
(6,335
)
               
Provision for income taxes
   
147
   
355
 
               
Net income (loss)
   
1,699
   
(6,690
)
               
Deemed dividend on redeemable preferred stock
   
123
   
--
 
 
             
Net income (loss) attributable to common stockholders
 
$
1,576
 
$
(6,690
)
               
Net income (loss) per share:
             
Basic
 
$
0.06
 
$
(0.53
)
Diluted
 
$
0.05
 
$
(0.53
)
               
Shares used in computing net income (loss) per share:
             
Basic
   
26,613
   
12,548
 
Diluted
   
33,181
   
12,548
 
 
See accompanying notes to unaudited condensed consolidated financial statements.


SOUTHWALL TECHNOLOGIES INC.
UNAUDITED CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(in thousands)
 
 
Three months ended
 
 
 
April 3,
 
March 28,
 
Cash flows from operating activities:
 
2005
 
2004
 
Net income (loss)
 
$
1,699
 
$
(6,690
)
Adjustments to reconcile net income (loss) to net cash provided by (used in)
   
   
 
operating activities:
   
   
 
Impairment recoveries from long-lived assets
   
(170
)
 
-
 
Depreciation and amortization
   
623
   
615
 
Charges related to warrants issued to investors and creditors
   
-
   
4,818
 
Amortization of debt issuance costs
   
-
   
59
 
Stock compensation
   
91
   
-
 
Change in assets and liabilities:
   
   
 
Deferred revenues
   
(8
)
 
-
 
Accounts receivable, net
   
(334
)
 
2,439
 
Inventories, net
   
(8
)
 
(50
)
Other current and non current assets
   
(570
)
 
(2,501
)
Accounts payable and accrued liabilities
   
(764
)
 
(660
)
Net cash provided by (used in) operating activities
   
559
   
(1,970
)
 
Cash flows from investing activities:
   
   
 
Decrease in restricted cash
   
191
   
-
 
Proceeds from sale of property, plant and equipment
   
170
   
-
 
Expenditures for property, plant and equipment
   
(136
)
 
(347
)
Net cash provided by (used in) investing activities
   
225
   
(347
)
 
Cash flows from financing activities:
   
   
 
Repayments under capital lease
   
(4
)
 
-
 
Proceeds from exercise of stock options
   
19
   
-
 
Principal payment on borrowings
   
(812
)
 
(837
)
Payments on line of credit
   
-
   
(1,298
)
Proceeds from sale of convertible promissory notes
   
-
   
4,500
 
Investment credit in Germany
   
(5
)
 
--
 
Net cash provided by (used in) financing activities
   
(802
)
 
2,365
 
 
Effect of foreign exchange rate changes on cash
   
(10
)
 
268
 
Net increase (decrease) in cash and cash equivalents
   
(28
)
 
316
 
Cash and cash equivalents, beginning of period
   
4,547
   
1,152
 
Cash and cash equivalents, end of period
 
$
4,519
 
$
1,468
 
 
   
   
 
Supplemental cash flow disclosures:
   
   
 
Cash paid for interest
 
$
234
 
$
337
 
Cash paid for income taxes
 
$
11
 
$
90
 

See accompanying notes to unaudited condensed consolidated financial statements.
 
 
SOUTHWALL TECHNOLOGIES INC.
NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
 
Note 1—Interim Period Reporting:

The accompanying interim condensed consolidated financial statements of Southwall Technologies Inc. (“Southwall” or the “Company”) are unaudited and have been prepared in accordance with accounting principles generally accepted in the United States of America for interim financial information and with the instructions to Form 10-Q and Article 10 of Regulation S-X. Accordingly, certain information and footnote disclosure normally included in financial statements prepared in accordance with accounting principles generally accepted in the United States of America have been condensed or omitted. In the opinion of management, the unaudited condensed consolidated financial statements reflect all adjustments, consisting only of normal recurring adjustments, considered necessary to present fairly the financial position, results of operations and cash flows of Southwall and its subsidiaries for all periods presented. The Company suggests that these condensed consolidated financial statements be read in conjunction with the consolidated financial statements and notes thereto contained in the Company's Form 10-K for the year ended December 31, 2004 filed with the Securities and Exchange Commission on March 30, 2005. The results of operations for the interim periods presented are not necessarily indicative of the operating results of the full year.

The Company uses a 52-week fiscal year ending on December 31. The quarters ended April 3, 2005 and March 28, 2004 each included 13 weeks.

Note 2—Balance Sheet:

Inventories, net

Inventories are stated at the lower of cost (determined by the first-in, first-out method) or market. Cost includes materials, labor and manufacturing overhead. The Company establishes provisions for excess and obsolete inventories to reduce such inventories to their estimated net realizable value. Such provisions are charged to cost of net revenues. At April 3, 2005 and December 31, 2004, inventories consisted of the following (in thousands):

 
 
April 3,
 
December 31,
 
 
 
2005
 
2004
 
Raw materials
 
$
4,048
 
$
4,755
 
Work-in-process
   
3,502
   
2,059
 
Finished goods
   
813
   
1,541
 
 
 
$
8,363
 
$
8,355
 
 
Other long-term liabilities

Other long-term liabilities consisted of the following at April 3, 2005 and December 31, 2004 (in thousands):

   
April 3,
 
December 31,
 
 
 
2005
 
2004
 
           
Liabilities associated with settlement agreement
 
$
2,354
 
$
2,354
 
Deferred tax liability
   
331
   
397
 
Long-term restructuring costs
   
200
   
200
 
Other
   
249
   
271
 
   
$
3,134
 
$
3,222
 
 

Note 3—Net Income (Loss) Per Share:

Basic net income (loss) per share is computed by dividing income attributable to common stockholders (numerator) by the weighted average number of common shares outstanding (denominator) for the period. Diluted net income (loss) per share gives effect to all dilutive common shares potentially outstanding during the period, including stock options, warrants to purchase common stock and redeemable convertible preferred stock. The computation of diluted income (loss) per share uses the average of the closing prices of the common stock during the period.  In addition, the preferred stock dividends are added back to net income attributable to common stockholders since they would not be paid in cash if the preferred stock was converted to common stock.

In net loss periods, the basic and diluted weighted average shares of common stock and common stock equivalents are the same because the inclusion of common stock equivalents would be anti-dilutive. Accordingly, for the three-month period ended March 28, 2004, there was no difference between the denominators used for the calculation of basic and diluted net loss per share. There were 2,870,197 and 14,241,535 options and warrants, respectively, outstanding at March 28, 2004 that were excluded from the diluted net loss per share calculation as reported because they were anti-dilutive.
 
The Company excludes options from the computation of diluted weighted average shares outstanding if the exercise price of the options is greater than the average market price of the shares because the inclusion of these options would be antidilutive to earnings per share.  Accordingly, stock options to purchase 1,789,755 shares at an average price of  $3.80 per share were excluded from the computation of diluted weighted average shares outstanding for the three month period ended April 3, 2005.
 
Tables summarizing net income, for diluted net income per share and shares outstanding are shown below (in thousands):
   
Three months ended
 
 
 
April 3,
 
March 28,
 
 
 
2005
 
2004
 
Net income (loss) attributable to common stockholders-basic
 
$
1,576
 
$
(6,690
)
Add: Deemed dividend on redeemable preferred stock
   
123
   
-
 
Net income (loss) attributable to common stockholders-diluted
 
$
1,699
 
$
(6,690
)
               
Weighted average common shares outstanding-basic
   
26,613
   
12,548
 
Dilutive effect of warrants
   
357
   
-
 
Dilutive effect of performance shares
   
149
   
-
 
Dilutive effect of Series A preferred shares
   
4,893
   
-
 
Dilutive effect of stock options
   
1,169
     -  
Weighted average common shares outstanding - diluted
   
33,181
   
12,548
 
 
Note 4 - Segment Reporting:

Southwall reports segment information using the management approach to determine segment information. The management approach designates the internal organization that is used by management for making operating decisions and assessing performance as the source of its reportable segments. The Company is organized on the basis of products and services. The total net revenues for the automotive glass, electronic display, window film and architectural product lines for the first quarters of 2005 and 2004 were as follows (in thousands):
 
 
 
April 3, 2005
 
March 28, 2004
 
Automotive glass
 
$
6,385
 
$
4,401
 
Electronic display
   
4,079
   
3,419
 
Window film
   
3,646
   
1,844
 
Architectural
   
1,537
   
1,403
 
Total net revenues
 
$
15,647
 
$
11,067
 
 

The following is a summary of net revenues by geographic area (based on the location of the Company’s customers) for the first quarters of 2005 and 2004, respectively (in thousands):

 
 
April 3,
 
March 28,
 
 
 
  2005
 
 2004
 
United States
 
$
3,716
 
$
1,481
 
Japan
   
3,799
   
2,974
 
France
   
3,323
   
2,248
 
Pacific Rim
   
2,562
   
1,670
 
Germany
   
1,345
   
1,423
 
Rest of the world
   
902
   
1,271
 
Total net revenues
 
$
15,647
 
$
11,067
 

 
Note 5—Commitments and Contingencies:

The Company is named as a defendant, along with Bostik, Inc., in an action captioned WASCO Products, Inc. v. Southwall Technologies, Inc. and Bostik, Inc., Div. Action No. C 02 2926 SBA, which was filed in Federal District Court for the Northern District of California on June 18, 2002. The Company was served with the Complaint in this matter on July 1, 2002. The plaintiff filed the matter as a class action on behalf of all entities and individuals in the United States who manufactured and/or sold and warranted the service life of insulated glass units manufactured between 1989 and 1999, which contained Southwall Heat Mirror film and were sealed with a specific type of sealant manufactured by Bostik, Inc. The plaintiff alleged that the sealant provided by Bostik, Inc. was defective, resulting in elevated warranty replacement claims and costs. The plaintiff asserted claims against the Company for breach of an implied warranty of fitness, misrepresentation, fraudulent concealment, negligence, negligent interference with prospective economic advantage, breach of contract, unfair business practices and false or misleading business practices. The plaintiff sought recovery on behalf of the class of $100 million for damages allegedly resulting from elevated warranty replacement claims, restitution, injunctive relief, and non-specific compensation for lost profits. By Order entered December 22, 2003, the Court dismissed all claims against the Company. The plaintiff has filed a notice of appeal to the Ninth Circuit Court of Appeals. Southwall’s insurance carriers under reservation of rights are paying a percentage of the Company’s defense costs.

The Company is a defendant in the action captioned Four Seasons Solar Products Corp. v. Black & Decker Corp., Bostik, Inc. and Southwall Technologies Inc., No. 5 CV 1695, in the United States District Court for the Eastern District of New York. Plaintiff was a manufacturer of insulated glass units, which incorporate Heat Mirror film. Plaintiff alleged that a sealant produced by a co-defendant is defective, asserts causes of action for breach of contract, unfair competition, and fraudulent concealment, and sought monetary damages of approximately $36 million for past and future replacement costs, loss of customer goodwill, and punitive damages against all defendants. On April 8, 2003, the Court issued an order granting final judgment in Southwall’s favor. Four Seasons filed a Notice of Appeal. On appeal, the judgment in Southwall’s favor was affirmed. The Company’s insurance carriers under reservation of rights paid a percentage of the Company’s defense costs.


The insurance carriers in some of the litigation related to allege product failures and defects in window products manufactured by others in which the Company was a defendant in the past paid the defense and settlement costs related to such litigation. Those insurance carriers reserved their rights to recover a portion or all of such payments from the Company. As a result, those insurance carriers could seek from the Company up to an aggregate of $12.9 million plus defense costs, although any such recovery would be restricted to claims that were not covered by the Company’s insurance policies. The Company intends to vigorously defend any attempts by these insurance carriers to seek reimbursement. The Company is not able to estimate the likelihood that these insurance carriers will seek to recover any such payments, the amount, if any, they might seek, or the outcome of such attempts.

In addition, the Company is involved, from time to time, in certain other legal actions arising in the ordinary course of business. Southwall believes, however, that none of these actions, either individually or in the aggregate, will have a material adverse effect on its business, its consolidated financial position, results of operations or cash flows.

Note 6—Stock-Based Compensation:

Statement of Financial Accounting Standards No. 148 (“SFAS 148”), “Accounting for Stock-Based Compensation - Transition and Disclosure, an Amendment of FASB Statement No. 123” amends the disclosure requirements of Statement of Financial Accounting Standards No. 123 (“SFAS 123”), “Accounting for Stock-Based Compensation,” to require more prominent disclosures in both annual and interim financial standards regarding the method of accounting for stock-based employee compensation and the effect of the method used on reported results.

The Company accounts for stock-based employee compensation arrangements in accordance with provisions of Accounting Principles Board Opinion No. 25 (“APB25”), “Accounting for Stock Issued to Employees” and related interpretations. Under APB 25, compensation expense is based on the difference, if any, on the date of the grant, between the fair value of the Company’s stock and the exercise price.
 
The following table illustrates the effect on net income and earnings per share if the Company had applied the fair value recognition provisions of SFAS 123 and SFAS 148 to stock-based employee compensation (in thousands, except per share amounts):

   
Three months ended
 
 
 
April 3,
 
March 28,
 
 
 
 2005
 
 2004
 
Net income (loss) attributable to common stockholders
         
As reported
 
$
1,576
 
$
(6,690
)
Add: Stock-based employee compensation expense
             
included in reported net income (loss), net of
             
related tax effects
   
91
   
--
 
Deduct: Total stock-based employee compensation
             
determined under fair value based method
             
for all awards, net of related tax effects
   
(153
)
 
(9
)
Pro forma net income (loss) attributable to common
             
stockholders
 
$
1,514
 
$
(6,699
)
               
Net income (loss) attributable to common stockholders
             
per share:
             
As reported - basic
 
$
0.06
 
$
(0.53
)
Pro forma - basic
 
$
0.06
 
$
(0.53
)
               
As reported - diluted
 
$
0.05
 
$
(0.53
)
Pro forma - diluted
 
$
0.05
 
$
(0.53
)
 

The fair value of each option grant under the Company’s stock option plans is estimated on the date of grant using the Black-Scholes option pricing model, multiple option approach, with the following weighted average assumptions used for grants in the first quarter of 2005 and 2004, respectively: expected volatility of 116%, and 99%; risk-free interest rate of 3.56% and 2.3%; and expected lives from vesting date of 1.4 years and 1.89 years. Southwall did not pay dividends on common stock during these periods and assumed no dividend yield. The weighted average fair value of stock options granted in the first quarters of 2005 and 2004 was $0.45 and $1.81 per share, respectively. The Company granted 268,361 and 856,001 options during the first quarters of 2005 and 2004, respectively.

Note 7 - Restructuring:

The Company implemented a reduction in force at its Palo Alto location in December 2002, and elected to vacate certain buildings in Palo Alto. As result of these actions, the Company incurred a restructuring charge of $2.6 million in 2002 relating to employee severance packages and the remaining rents due on excess facilities in Palo Alto no longer occupied.

The following tables set forth the beginning and ending liability balances relating to the above described restructuring activity as well as activity during the fiscal quarters ended April 3, 2005 and March 28, 2004 (in thousands):
   
Excess
     
   
Facilities
 
Total
 
Balance at January 1, 2004
 
$
1,569
 
$
1,569
 
Provisions
   
--
   
--
 
Cash payments
   
(244
)
 
(244
)
Balance at March 28, 2004
 
$
1,325
 
$
1,325
 
               
Balance at January 1, 2005
 
$
274
 
$
274
 
Provisions
   
--
   
--
 
Cash payments
   
--
   
--
 
Balance at April 3, 2005
 
$
274
 
$
274
 

Note 8 - Guarantees:

The Company establishes a reserve for sales returns and warranties for specifically identified, as well as anticipated sales returns and warranties based on experience. The reserve for sales returns and warranties at April 3, 2005 and March 28, 2004 were as follows (in thousands):
 
   
Balance at
December 31,
2003
 
Provision
 
Utilized
 
Balance at
March 28,
2004
 
Accrued sales returns and warranties
 
$
1,850
 
$
578
 
$
(434
)
$
1,994
 
                           
   
Balance at
December 31, 
2004
   
Provision
   
Utilized
 
Balance at
April 3,
2005
 
Accrued sales returns and warranties
 
$
2,701
 
$
58
 
$
(564
)
$
2,195
 

10


Note 9 - Recent Accounting Pronouncements:

In April 2005, the Securities and Exchange Commission announced the adoption of a new rule that amends the effective date of Statement of Financial Accounting Standard No 123 (revised 2004). The effective date of the new standard under these new rules for the Company’s consolidated financial statements is January 1, 2006. Adoption of this statement will have a significant impact on the Company’s consolidated financial statements as the Company will be required to expense the fair value of the Company’s stock option grants and stock purchases under the Company’s employee stock purchase plan rather than disclose the impact on the Company’s consolidated net income (loss) within the Company’s footnotes, as is the Company’s current practice.

Note 10 - Subsequent Events:

On April 28, 2005, Southwall repaid all obligations outstanding under its credit agreements with PBF dated December 18, 2003, as amended April 29, 2004. Principal and interest then outstanding under these agreements of approximately $3.0 million was repaid with amounts borrowed under a new Credit Agreement with Wells Fargo HSBC Trade Bank, N.A. (the “Bank”). In connection with this repayment, PBF will release its security interests in Southwall’s assets.

On April 28, 2005, Southwall entered into a Credit Agreement (the “Credit Agreement”) with the Bank, which provides for two facilities - a revolving loan facility and a formula line. The Credit Agreement provides for two facilities. All amounts borrowed under both facilities under the Credit Agreement must be repaid on or before May 31, 2006.

The first facility is a revolving line of credit under which Southwall may from time to time borrow up to $3 million, subject to satisfaction of certain conditions. Amounts borrowed under the first facility bear interest at the prime rate minus 1.75% per annum or LIBOR plus 1% per annum, at Southwall’s option. The Company borrowed approximately $3.0 million from this facility on April 28, 2005.

The second facility is a formula line under which Southwall may from time to time borrow up to $3 million, subject to certain conditions, with advances of up to 80% of eligible accounts receivable. Amounts borrowed under the second facility bear interest at the prime rate minus 0.25% per annum. Southwall may not borrow under the second facility until after June 30, 2005, and only if they meet certain financial covenants.In addition, if Southwall activates the second facility, all borrowings under both facilities under the Credit Agreement are subject to the satisfaction of the additional financial covenants.

All borrowings under both facilities are secured by Southwall’s inventory, receivables, raw material, works in progress and other assets. In addition, the first facility under the Credit Agreement is secured by a letter of credit posted by Needham & Company, one of Southwall’s stockholders.

The terms of the Credit Agreement, among other things, limit the ability of Southwall to (i) incur, assume or guarantee additional indebtedness in excess of $13.5 million (other than pursuant to the Credit Agreement), (ii) pay dividends or repurchase stock (except up to $0.6 million per year of dividends on preferred stock), (iii) incur liens upon the collateral pledged to the bank, (iv) make any loans or advances to, or investments in, any person or entity outside the ordinary course of business, (v) merge, consolidate, sell or otherwise dispose of substantially all or a substantial or material portion of Southwall’s assets, (vi) enter into transactions with affiliates, and (vii) make acquisitions other than up to an aggregate amount of $3 million and (viii) make capital expenditures in any fiscal year in excess of $1.5 million.
 
11


The Credit Agreement provides for events of default, which include, among others, (a) nonpayment of amounts when due (with no grace periods), (b) the breach of Southwall’s representations or covenants or other agreements in the Credit Agreement or related documents, (c) payment defaults or accelerations of other indebtedness of Southwall, (d) a failure to pay certain judgments, (e) the occurrence of any event or condition that Bank believes impairs or is substantially likely to impair the prospects of payment or performance by Southwall, and (f) certain events of bankruptcy, insolvency or reorganization. Generally, if an event of default occurs, the bank may declare all outstanding indebtedness under the Credit Agreement to be due and payable.

12


Item 2—Management's Discussion and Analysis of Financial Condition and Results of Operations:

The following discussion and analysis of our financial condition and results of operations should be read in conjunction with our unaudited condensed consolidated financial statements and notes thereto appearing elsewhere in this report. This discussion and analysis contains forward-looking statements that involve risks and uncertainties, including those discussed below under "Forward-Looking Statements" and "Risk Factors" and in our Annual Report on Form 10-K for the year ended December 31, 2004. You should not place undue reliance on these forward-looking statements. Actual results may differ materially from those anticipated in the forward-looking statements. These forward-looking statements represent our judgment as of the date of the filing of this Form 10-Q.

Overview

We are a global developer, manufacturer and marketer of thin film coatings on flexible substrates for the automotive glass, electronic display, architectural glass and window film markets. We have developed a variety of products that control sunlight in automotive glass, reduce light reflection, reduce electromagnetic radiation and improve image quality in electronic display products and conserve energy in architectural products. Our products consist of transparent solar-control films for automotive glass; anti-reflective films for computer screens, including flat panel displays, plasma displays; transparent conductive films for use in touch screen and liquid crystal displays; energy control films for architectural glass; and various other coatings.
 
Restructuring and financing activities. As a consequence of the decline in our revenues and negative cash flows in 2003, we implemented several cost cutting and business restructuring activities during 2003 and 2004. These activities, which included employee layoffs and the closure of several facilities (including the closure of our Tempe manufacturing facility in the fourth quarter of 2003), were designed to improve our cash flow from operations to allow us to continue as a going concern. During the fourth quarter of 2003 and the first quarter of 2004, we agreed to new payment terms with all of our major creditors and vendors, which extended or reduced our payment obligations. We also issued $4.5 million of convertible promissory notes and warrants to investors. The convertible promissory notes were converted to Series A shares and the warrants were exercised for shares of common stock in the fourth quarter of 2004.
 
Demand for our customers' products. We derive significant benefits from our relationships with a few large customers and suppliers. Our revenues and gross profit can increase or decrease rapidly reflecting underlying demand for the products of one or a small number of our customers. We may also be unable to replace a customer when a relationship ends or demand for our product declines as a result of evolution of our customers' products.

In 1999, we expanded our relationship with customers in the automotive glass market, including Pilkington PLC, Saint Gobain Sekurit and Globamatrix Holdings Pte. Ltd., or Globamatrix, which collectively accounted for approximately 54%, 45%, 45% and 37% of our total revenues during the first quarter of 2005 and in 2004, 2003 and 2002, respectively.

Under our agreement with Globamatrix, as amended, Globamatrix agreed to a 2004 minimum purchase commitment of $9.0 million of products. For each year after 2004 through and including 2011, Globamatrix is required to purchase an amount of product equal to 110% of the amount of product it was required to purchase in the prior year. Globamatrix is obligated to purchase $10.3 million of products in 2005. During the first quarter of 2005, Globamatrix purchased approximately $3.5 million of products.

13


Sales returns and allowances. Our gross margins and profitability have been adversely affected from time to time by product quality claims. From 2000 to 2004 our sales returns provision has averaged approximately 3.5% to 4.7% of gross revenues. In 2002, we had certain quality claims with respect to products produced for Globamatrix, which reduced our gross profit by approximately $1.5 million. During the first quarter of 2005, our sales returns provision has average approximately 0.4% of our gross revenues due to less quality claims received during the period.
 

Three Months Ended April 3, 2005 compared with Three Months Ended March 28, 2004

Results of Operations

Net revenues. Our net revenues for the three months ended April 3, 2005 and March 28, 2004 were $15.6 million and $11.1 million, respectively.

Our sales in the electronic display market increased by $0.7 million, or 19.3%, from $3.4 million in the first quarter of 2004 to $4.1 million in the same period of 2005. The increase was primarily due to higher demand for our sputtered thin film filter products for Plasma Display Panel products. Mitsui Chemicals is our primary customer in the electronic display market. Sales to Mitsui increased $1.5 million from $2.4 million in the first quarter of 2004 to $3.9 million in the same period in 2005 due to higher demand for our product in the flat panel display, or FPD market. This increase was partially offset by decreases in sales from other customers.
 
Our sales in the window film market increased by $1.8 million, or 97.7%, from $1.8 million in the first quarter of 2004 to $3.6 million in the same period in 2005. We sell our window film products primarily to customers located in the Pacific Rim and the Middle East. We believe our sales to this market during the first quarter of 2004 were negatively affected by the SARs epidemic and the conflicts in Iraq and Afghanistan. Our window film sales reflected strong growth among all four of our window film customers in the first quarter of 2005 due to higher demand.

Our sales in the automotive market increased by $2.0 million, or 45.1% from $4.4 million in the first quarter of 2004 to $6.4 million in the same period in 2005. The increase resulted from increased sales to our Original Equipment Manufacturer, or OEM, and Automotive Replacement Glass, or ARG, customers.

Our sales in the architectural market were $1.5 million in the first quarter of 2005 compared to $1.4 million in the same period of 2004.

Cost of revenues. Cost of revenues consists of materials and subcontractor services, labor and manufacturing overhead. Cost of revenues was $11.3 million in the first quarter of 2005 compared to $8.5 million in the same period of 2004. The increase in cost of revenues was primarily due to the increase in revenues.
 
Gross profit and gross margin. Our gross profit increased $1.8 million from $2.6 million in the first quarter of 2004 to $4.4 million in the same period of 2005. As a percent of sales, gross profit increased from 23.5% in the first quarter of 2004 to 28.0% in the same period in 2005. The increase in gross margin was primarily the result of a $3.3 million reduction in our manufacturing costs from the first quarter of 2004 to the first quarter of 2005 as a result of the restructuring actions taken in 2003 and the first quarter of 2004. Continued improvements in our Dresden operations combined with stabilized U.S. production have played an important role in the increase of our gross margin in the first quarter of 2005 when compared to the same period in 2004.

Operating expenses
 
14

 
Research and development. Research and development expenses decreased $0.1 million from $0.8 million in the first quarter of 2004 to $0.7 million in the same period of 2005. The 14.1% decrease from year to year was due in part to a decrease in labor and employee benefits costs as a result of the reduction in force of 14 employees initiated in the fourth quarter of 2003 and completed in the second quarter of 2004. We are currently conducting a national search for a new Chief Technology Officer/Vice President of Engineering as well as for several new scientific and engineering positions. We expect our research and development expenses to increase in the coming months.

Selling, general and administrative. Selling, general and administrative expenses consist primarily of corporate and administrative overhead, selling commissions, advertising costs and occupancy costs. Selling, general and administrative expenses decreased $1.0 million from $3.1 million in the first quarter of 2004 to $2.0 million in the same period of 2005. The decrease in general and administrative expenses was primarily due to lower personnel costs in the amount of $0.4 million, as a result of staff reductions, which took place in the fourth quarter of 2003 and were completed in the second quarter of 2004. In addition, legal and accounting fees decreased from approximately $0.6 million in the first quarter of 2004 to approximately $0.1 million in the same period of 2005. We expect our selling, general and administrative expenses to increase slightly as we have started our efforts to comply with Section 404 of the Sarbanes-Oxley Act of 2002.

Impairment (recoveries) for long-lived assets. The recovery of $0.2 million of previously recorded impairment charges in the first quarter of 2005 related to the final payment from the sale of a production machine in the second quarter of 2004 which was impaired in the third quarter of 2003.

Income (loss) from operations. We earned income from operations of $1.8 million in the first quarter of 2005 compared to incurring a loss from operations in the same period of 2004 of $6.3 million. The income from operations in 2005 was primarily due to higher net revenues, higher gross margins and lower operating expenses. The loss from operations in 2004 was primarily due to lower net revenues, lower gross margins and higher operating expenses for the reasons described above.
 
Interest expense, net. Interest expense decreased by $0.4 million from $0.7 million in the first quarter of 2004 to $0.3 million in the same period of 2005. The decrease in interest expense was primarily attributable to less outstanding debt in 2005. The primary reduction in outstanding debt was due to the conversion of the Secured Convertible Promissory Notes into our Series A shares.
 
Costs of warrants issued. In the first quarter of 2004, the Company incurred $4.8 million in warrants expense as a result of the re-measurement of all outstanding warrants and other financial instruments. There was no warrants expense recorded in the first quarter of 2005.

Other income, net. Other income, net, reflects foreign exchange transaction gains and losses in the first quarter of 2004 and 2005. Some of our transactions with foreign customers and suppliers are denominated in foreign currencies, principally the Euro and Japanese yen. As exchange rates fluctuate relative to the U.S. dollar, exchange gains and losses occur.

Income (loss) before provision for income taxes. We recorded a pre-tax profit of $1.8 million in the first quarter of 2005 compared to a pre-tax loss of $6.3 million in the same period of 2004 for the reasons set forth above.

Provision for income taxes. The provision for income taxes in 2004 and 2005 was primarily related to our German subsidiary, Southwall Europe GmBH (SEG). The decrease in the provision for income taxes during the first quarter of 2005 when compared to the same period in 2004 was due to lower taxable income in SEG in 2005.

15


Net income (loss). Net income for the first quarter of 2005 was $1.7 million compared to a net loss of $6.7 million in the same period of 2004 for the reasons set forth above.

Deemed dividend on redeemable preferred stock. We incurred $0.1 million of deemed dividend on redeemable preferred stock in the first quarter of 2005 as a result of the conversion of our Secured Convertible Promissory Notes to Series A shares in December 2004. The Series A shares carry a 10% cumulative dividend rate.

Net income (loss) attributable to common stockholders. Net income attributable to common stockholders for the first quarter of 2005 was $1.6 million compared to net loss attributable to common stockholders of $6.7 million for the same period in 2004.

Liquidity and capital resources.

Liquidity
 
Our principal liquidity requirements are for working capital, consisting primarily of accounts receivable and inventories. We believe that because of the relatively long production cycle of certain of our products, our inventories will continue to represent a significant portion of our working capital.

Our cash and cash equivalents decreased slightly during the first quarter of 2005. Cash provided from operations for the first quarter of 2005 of $0.6 million was primarily the result of net income of $1.7 million and non-cash depreciation of $0.6 million, partially offset by impairment recoveries from long-lived assets of $0.2 million and increases in accounts receivable of $0.3 million, other current and non-current assets of $0.6 million and accounts payable and accrued liabilities of $0.8 million. Cash used in operating activities for the first quarter of 2004 of $2.0 million was primarily the result of net loss of $6.7 million and increases in other current and non-current assets of $2.5 million and accounts payable and accrued liabilities of $0.7 million, partially offset by non-cash depreciation of $0.6 million, warrants issued to investors and creditors of $4.8 million and decreases in account receivable of $2.4 million.

Cash provided by investing activities for the first quarter of 2005 of $0.2 million was primarily the result of decrease in restricted cash of $0.2 million and proceeds from the sale of fixed asset of $0.2 million, partially offset by capital expenditures of $0.1 million. Cash used in investing activities for the first quarter of 2004 of $0.3 million was primarily the result of capital expenditures.

Cash used in financing activities for the first quarter of 2005 of $0.8 million primarily the result of repayments under capital leases and repayments of notes payable of $0.8 million. Cash provided by financing activities for the first quarter of 2004 of $2.4 million was primarily the result of proceeds from the issuance of convertible promissory notes of $4.5 million, partially offset by principal payment of borrowings of $0.8 million and repayments on the line of credit of $1.3 million.

We entered into an agreement with the Saxony government in May 1999 under which we receive investment grants. As of December 31, 2004, we had received 5.0 million Euros or $6.8 million of the grants and accounted for these grants by applying the proceeds received to reduce the cost of our fixed assets of our Dresden manufacturing facility. Additionally, as of December 31, 2004, we have a balance remaining from the government grants received in May 1999 of 0.4 million Euros or $0.5 million, which has been recorded as an advance and held as restricted cash until we receive approval from the Saxony government to apply the funds to reduce our capital expenditures. We did not receive any grants during the first quarter of 2005. If we fail to meet certain requirements in connection with these grants, the Saxony government has the right to demand repayment of the grants. The total annual amount of investment grants and investment allowances that we are entitled to seek varies from year to year based upon the amount of our capital expenditures that meet certain requirements of the Saxony government. Generally, we are not eligible to seek total investment grants and allowances for any year in excess of 33% of our eligible capital expenditures for that year. We expect to continue to finance a portion of our capital expenditures in Dresden with additional grants from the Saxony government and additional loans from German banks, some of which may be guaranteed by the Saxony government. However, we cannot guarantee that we will be eligible for or will receive additional grants in the future from the Saxony government.

16


Borrowing arrangements

On April 28, 2005, we repaid all obligations outstanding under our credit agreements with PBF dated December 18, 2003, as amended April 29, 2004. In connection with this repayment, PBF will release its security interests in our assets.

On April 28, 2005, we entered into a Credit Agreement (the “Credit Agreement”) with Wells Fargo HSBC Trade Bank, N.A. (the “Bank”) The Credit Agreement provides for two facilities. All amounts borrowed under both facilities under the Credit Agreement must be repaid on or before May 31, 2006.

The first facility is a revolving line of credit under which we may from time to time borrow up to $3 million, subject to satisfaction of certain conditions. Amounts borrowed under the first facility bear interest at the prime rate minus 1.75% per annum or LIBOR plus 1% per annum, at our option. We borrowed approximately $3.0 million from this facility on April 28, 2005.

The second facility is formula line under which we may from time to time borrow up to $3 million, subject to certain conditions, with advances of up to 80% of eligible accounts receivable. Amounts borrowed under the second facility bear interest at the prime rate minus 0.25% per annum. We may not borrow under the second facility until after June 30, 2005, and only if they meet certain financial covenants. In addition, if we activate the second facility, all borrowings under both facilities under the Credit Agreement are subject to the satisfaction of the additional financial covenants.

All borrowings under both facilities are secured by our inventory, receivables, raw material, works in progress and other assets. In addition, the first facility under the Credit Agreement is secured by a letter of credit posted by Needham & Company, one of our stockholders.

The terms of the Credit Agreement, among other things, limit our ability to (i) incur, assume or guarantee additional indebtedness in excess of $13.5 million (other than pursuant to the Credit Agreement), (ii) pay dividends or repurchase stock (except up to $0.6 million per year of dividends on preferred stock), (iii) incur liens upon the collateral pledged to the bank, (iv) make any loans or advances to, or investments in, any person or entity outside the ordinary course of business, (v) merge, consolidate, sell or otherwise dispose of substantially all or a substantial or material portion of our assets, (vi) enter into transactions with affiliates, and (vii) make acquisitions other than up to an aggregate amount of $3 million and (viii) to make capital expenditures in any fiscal year in excess of $1.5 million.

The Credit Agreement provides for events of default, which include, among others, (a) nonpayment of amounts when due (with no grace periods), (b) the breach of our representations or covenants or other agreements in the Credit Agreement or related documents, (c) payment defaults or accelerations of our other indebtedness, (d) a failure to pay certain judgments, (e) the occurrence of any event or condition that Bank believes impairs or is substantially likely to impair the prospects of payment or performance by us, and (f) certain events of bankruptcy, insolvency or reorganization. Generally, if an event of default occurs, the Bank may declare all outstanding indebtedness under the Credit Agreement to be due and payable.
 
17


The foregoing description does not purport to be a complete statement of the parties’ rights and obligations under the Credit Agreement and the transactions contemplated thereby or a complete explanation of the material terms thereof.

Capital expenditures

We anticipate spending approximately $1.1 million in capital expenditures in 2005, primarily to maintain and upgrade our production facilities in Dresden. We spent approximately $0.1 million in capital expenditures during the first quarter of 2005.

Future payment obligations

Our future payment obligations on our borrowings pursuant to our term debt, capital lease obligations, non-cancelable operating leases and other non-cancelable contractual commitments are as follows at April 3, 2005 (in thousands):

 
 
 
 
 
 
 
 
 
 
Greater
 
 
 
 
 
Less than
 
 
 
 
 
Than
 
 
 
Total
 
1 Year
 
1-3 Year
 
4-5 Year
 
5 Year
 
Contractual Obligations:
 
 
 
 
 
 
 
 
 
 
 
Term debt (1)
 
$
11,735
 
$
1,267
 
$
2,279
 
$
5,181
 
$
3,008
 
Line of credit
   
2,975
   
2,975
   
--
   
--
   
--
 
Capital lease obligations
   
39
   
39
   
--
   
--
   
--
 
Operating leases (2)
   
2,149
   
541
   
1,523
   
85
   
--
 
Total contractual cash obligations
 
$
16,898
 
$
4,822
 
$
3,802
 
$
5,266
 
$
3,008
 
 
 
(1)
Represents loan agreements with Portfolio Financing Servicing Company, Bank of America and Lehman Brothers, and several German banks.
(2)
Represents the remaining rents owed on building we rent in Palo Alto, California.
 
18


Item 3—Quantitative and Qualitative Disclosures about Market Risk

We are exposed to the impact of interest rate changes, foreign currency fluctuations, and changes in the market values of our investments.

Financing risk: Our exposure to market rate risk for changes in interest rates relates primarily to our line of credit which bears an interest rate equal to 1.75% above the bank base rate (which was 5.75% at April 3, 2005) or 1% above the LIBOR rate (which was approximately 3.08% at April 3, 2005) and is calculated based on amounts borrowed under the facility. In addition, the interest rate on one of our German loans was reset to the prevailing market rate of 5.75% on December 31, 2004 and another of our German loans will have its interest rate reset to the prevailing market rate in 2009. Fluctuations or changes in interest rates may adversely affect our expected interest expense. The effect of a 10% fluctuation in the interest rate on our line of credit would have had an effect of about $21,000 on our interest expense for the first quarter of 2005.

Investment risk: We invest our excess cash in money market accounts and, by practice, limit the amount of exposure to any one institution. Investments in both fixed rate and floating rate interest earning instruments carry a degree of interest rate risk. Fixed rate securities may have their fair market value adversely affected due to a rise in interest rates, while floating rate securities may produce less income than expected if interest rates fall. The effect of a 10% fluctuation in the interest rate of any of our floating rate securities would have had an adverse effect of less than $10,000 for the first quarter of 2005.

Foreign currency risk: International revenues (defined as sales to customers located outside of the United States) accounted for approximately 76% of our total sales in the first quarter of 2005. Approximately 47% of our international revenues were denominated in Euros relating to sales from our Dresden operation in the first quarter of 2005. The other 53% of our international sales were denominated in US dollars. In addition, certain transactions with foreign suppliers are denominated in foreign currencies (principally Japanese Yen). The effect of a 10% fluctuation in the Euro exchange rate would have had an effect of less than $0.5 million on net revenues for the first quarter of 2005 and the effect on expenses of a 10% fluctuation in the Yen exchange rate would have been minimal.

19


FORWARD-LOOKING STATEMENTS

This Quarterly Report contains forward-looking statements, which are subject to a number of risks and uncertainties. All statements other than statements of historical facts are forward-looking statements. These statements are identified by terminology such as "may," "will," "could," "should," "expects," "plans," "intends," "seeks," "anticipates," "believes," "estimates," "potential," or "continue," or the negative of such terms or other comparable terminology, although not all forward-looking statements contain these identifying words. Forward-looking statements are only predictions and include statements relating to:

·
our ability to remain as a going concern;
  · 
our strategy, future operations and financial plans, including, without limitation, our plans to install and commercially produce products on new machines;
  · 
the success of our restructuring activities;
  · 
the continued trading of our common stock on the Over-the-Counter Bulletin Board;
  · 
our projected need for, and ability to obtain, additional borrowings and our future liquidity;
  · 
future applications of thin-film technologies and our development of new products;
  ·
our competition;
  · 
statements about the future size of markets;
  · 
our expectations with respect to future grants, investment allowances and bank guarantees from the Saxony government;
  · 
our expected results of operations and cash flows;
  · 
pending and threatened litigation and its outcome; and
  ·
our projected capital expenditures.

You should not place undue reliance on our forward-looking statements. Actual events or results may differ materially. In evaluating these statements, you should specifically consider various factors, including the risks outlined below under "Risk Factors." These factors may cause our actual results to differ materially from any forward-looking statement. Although we believe the expectations reflected in our forward-looking statements are reasonable as of the date they are being made, we cannot guarantee our future results, levels of activity, performance, or achievements. Moreover, neither we, nor any other person, assume responsibility for the future accuracy and completeness of these forward-looking statements.

20


RISK FACTORS

Financial Risks

Our working capital position, financial commitments and historical performance may raise doubt about our ability to have positive earnings in the future.

We incurred net losses in 2004, 2003 and 2002 and negative cash flows from operations in 2003 and 2002. These factors together with our working capital position and our significant debt service and other contractual obligations at April 3, 2005, may raise doubt about our ability to restore profitable operations, generate cash flow from operating activities and obtain additional financing. These and other factors related to our business during recent years, including the restatement in 2000 of our consolidated financial statements for prior periods, operating losses in 1998, 1999, 2000, 2002 and 2003, our past failure to comply with covenants in our financing agreements and our voluntary delisting from NASDAQ in March 2004 may make it difficult for us to secure the required additional borrowings on favorable terms or at all. We intend to seek additional borrowings or alternative sources of financing; however, difficulties in borrowing money or raising financing could have a material adverse effect on our operations, planned capital expenditures and ability to comply with the terms of government grants.

The transactions with Needham and Dolphin may have a negative effect on us or our stock price.

As a result of the consummation of the financing transactions in December 2003 and February 2004 with Needham & Company and its affiliates and Dolphin Direct Equity Partners, L.P, our shareholders suffered material dilution. As our largest stockholder and the guarantor of our line of credit, Needham could prevent us from seeking additional borrowings or alternative sources of financing that we require for future operations or otherwise control the company in ways that might have a material adverse effect on the company or our stock price.

Covenants or defaults under our credit and other loan agreements may prevent us from borrowing or force us to curtail our operations.

As of April 3, 2005, we had total outstanding obligations under our credit and other loan agreements of $14.7 million. Our inability to make timely payments of interest or principal under these facilities could materially adversely affect our ability to borrow money under existing credit facilities, to secure additional borrowings or to function as a going concern. Our current credit facilities contain financial covenants that will require us to meet certain financial performance targets and operating covenants that limit our discretion with respect to business matters. Among other things, these covenants restrict our ability to borrow additional money, create liens or other encumbrances, and make certain payments including dividends and capital expenditures. Many of these loans contain provisions that permit the lender to declare the loans immediately due if there is a material adverse change in our business. These credit facilities also contain events of default that could require us to pay off indebtedness before its maturity. The restrictions imposed by these credit facilities or the failure of lenders to advance funds under these facilities could force us to curtail our operations or have a material adverse effect on our liquidity.
  
Our ability to borrow is limited by the nature of our equipment and some of our accounts receivable.

Our equipment is custom designed for a special purpose. In addition, a large portion of our accounts receivable are from foreign sales, which are often more difficult to collect than domestic accounts receivable. As a result of the nature of our equipment and accounts receivable, lenders will generally allow us to borrow less against these items as collateral than they would for other types of equipment or domestic accounts receivable, or require us to provide additional credit enhancements.

21


If we default under our secured credit facilities and financing arrangements, the lenders could foreclose on the assets we have pledged to them requiring us to significantly curtail or even cease our operations.

In connection with our current borrowing facilities and financing arrangements, we have granted security interests in and liens on substantially all of our assets, including our production machines and our Dresden facility, to secure the loans. If our senior lenders were to repossess one or more of those machines, our ability to produce product would be materially impaired. Our revenues, gross margins and operating efficiency would also be materially adversely affected. Our obligations under our secured credit facilities contain cross-default and cross-acceleration provisions and provisions that allow the lenders to declare the loans immediately due if there is a material adverse change in our business. If we default under the credit facilities or financing arrangements the lenders could declare all of the funds borrowed thereunder, together with all accrued interest, immediately due and payable. If we are unable to repay such indebtedness, the lenders could foreclose on the pledged assets. If the lenders foreclose on our assets, we would be forced to significantly curtail or even cease our operations.

Our quarterly revenue and operating results are volatile and difficult to predict. If we fail to meet the expectations of public market analysts or investors, the market price of our common stock may decrease significantly.

Our quarterly revenue and operating results have varied significantly in the past and will likely vary significantly in the future. Our revenue and operating results may fall below the expectations of securities analysts or investors in future periods. Our failure to meet these expectations would likely adversely affect the market price of our common stock.

Our quarterly revenue and operating results may vary depending on a number of factors, including:

  l
fluctuating customer demand, which is influenced by a number of factors, including market acceptance of our products and the products of our customers and end-users, changes in product mix, and the timing, cancellation or delay of customer orders and shipments;
     
  l
 
the timing of shipments of our products by us and by independent subcontractors to our customers;

  l
 
manufacturing and operational difficulties that may arise due to, among other things, quality control, capacity utilization of our production machines, unscheduled equipment maintenance, and the hiring and training of additional staff;

 
l
our ability to introduce new products on a timely basis; and

  l
 
competition, including the introduction or announcement of new products by competitors, the adoption of competitive technologies by our customers, the addition of new production capacity by competitors and competitive pressures on prices of our products and those of our customers.

 We expect to be subject to increased foreign currency risk in our international operations.

In 2003 and 2004 and during the first quarter of 2005, approximately 34%, 31%, and 36% of our revenues, respectively, were denominated in Euros, primarily related to sales from our Dresden operation, including sales to one of our largest customers, a European automotive glass manufacturer. In addition, other customers may request to make payments in foreign currencies. Also, certain transactions with foreign suppliers are denominated in foreign currencies, primarily Japanese Yen.

22


A strengthening in the dollar relative to the currencies of those countries in which we do business would increase the prices of our products as stated in those currencies and could hurt our sales in those countries. Significant fluctuations in the exchange rates between the U.S. dollar and foreign currencies could cause us to lower our prices and thus reduce our profitability and cash flows. These fluctuations could also cause prospective customers to cancel or delay orders because of the increased relative cost of our products.

Our suppliers and subcontractors may impose more onerous payment terms on us.

As a result of our financial performance and voluntary delisting from NASDAQ, our suppliers and creditors may impose more onerous payment terms on us, which may have a material adverse effect on our financial performance and our liquidity. For example, one of our subcontractors has required us to provide it with a security interest in all of our inventory held by it and has limited the amount of unpaid invoices we may have outstanding with it at any time.

Operational Risks

We depend on a small number of customers for nearly all of our revenues, and the loss of a large customer could materially adversely affect our revenues or operating results.

Our ten largest customers accounted for approximately 81%, 79%, 84% and 84% of net revenues during the first quarter of 2005 and in fiscal years 2004, 2003, and 2002, respectively. We have contracts extending past 2005 with only two of these customers. We expect to continue to derive a significant portion of our net revenues from this relatively small number of customers. Accordingly, the loss of a large customer could materially hurt our business, and the deferral or loss of anticipated orders from a large customer or a small number of customers could materially reduce our revenue and operating results in any period. Some of our largest automotive glass customers have used a technology-direct-to-glass sputtering-as an alternative to our window films, which in 2002 and 2003 resulted in a decrease in orders from these customers. The continued or expanded use of this technology by our automotive glass customers would have a material adverse effect on our results of operations and financial position.

We must continue to develop new products or enhance existing products on a timely basis to compete successfully in a rapidly changing marketplace.

Our future success depends upon our ability to introduce new products, improve existing products and processes to keep pace with technological and market developments, and to address the increasingly sophisticated and demanding needs of our customers, especially in the electronic display and automotive markets. Technological changes, process improvements, or operating improvements that could adversely affect us include:

 
l
the development of competing technologies to our anti-reflective and silver reflector films for liquid crystal displays in the flat panel display industry;
 
 
l
changes in the way coatings are applied to alternative substrates such as tri-acetate cellulose, or TAC;
 
 
l
the development of new technologies that improve the manufacturing efficiency of our competitors;
 
 
l
the development of new materials that improve the performance of products that could compete with our products; and

l
improvements in the alternatives to the sputtering technology we use to produce our products, such as plasma enhanced chemical vapor deposition, or PECVD.
 
23


Our research and development efforts may not be successful in developing products in the time, or with the characteristics, necessary to meet customer needs. If we do not adapt to technological changes or process or operating improvements, our competitive position, operations and prospects would be materially adversely affected.

Our ability to successfully identify suitable target companies and integrate acquired companies or technologies may affect our future growth.

A potential part of our continuing business strategy is to consider acquiring companies, products, and technologies that complement our current products, enhance our market coverage, technical capabilities or production capacity, or offer other growth opportunities. Our ability to successfully complete acquisitions requires that we identify suitable target companies, agree on acceptable terms, and obtain acquisition financing on acceptable terms. In connection with these acquisitions, we could incur debt, amortization expenses relating to identified intangibles, impairment charges relating to goodwill, or merger related charges, or could issue stock that would dilute our current shareholders' percentage of ownership. The success of any acquisitions will depend upon our ability to integrate acquired operations, retain and motivate acquired personnel, and increase the customer base of the combined businesses. We cannot assure you that we will be able to accomplish all of these goals. Any future acquisitions would involve certain additional risks, including:

 
l
difficulty integrating the purchased operations, technologies, or products;

 
l
unanticipated costs, which would reduce our profitability;

 
l
diversion of management's attention from our core business;

 
l
potential entrance into markets in which we have limited or no prior experience; and

 
l
potential loss of key employees, particularly those of the acquired business.

If one of our customers is able to enforce a European automotive film patent, we may be restricted from using the methods present in such patent to produce some of our products.
 
On March 3, 2005, the European Patent Office allowed a European patent owned by Pilkington Automotive GmBH entitled "Method for producing a laminated glass pane free of optical obstruction caused by warping, use of a particular carrier film for the production of the laminated glass pane and carrier films particularly suitable for the method of use." This European patent covers certain laminated films and methods of using them which may prevent us from producing certain films designed for the automotive markets. Our inability to use this technology could adversely affect our ability to provide a full range of products to the automotive film market. We participated in opposing the European patent and will appeal the European Patent Office decision.
 
Failure to meet the volume requirements of our customers may result in a loss of business or contractual penalties.

24


Our long-term competitive position will depend to a significant extent on our manufacturing capacity. The failure to have sufficient capacity, to fully utilize capacity when needed or to successfully integrate and manage additional capacity in the future could adversely affect our relationships with customers and cause customers to buy similar products from our competitors if we are unable to meet their needs. For example, we believe that we lost substantial potential architectural products sales in 2001 because we did not have the capacity to manufacture the required amounts of products. Also, our failure to produce required amounts of products under some of our contracts will result in price reductions on future sales under such contracts or penalties under which we would be required to reimburse the customer for the full cost of any product not delivered in a timely manner, either of which would reduce our gross margins.

We depend on our OEM customers for the sale of our products.

We sell a substantial portion of our products to a relatively small number of original equipment manufacturers, or OEMs. The timing and amount of sales to these customers ultimately depend on sales levels and shipping schedules for the OEM products into which our products are incorporated. We have no control over the volume of products shipped by our OEM customers or shipping dates, and we cannot be certain that our OEM customers will continue to ship products that incorporate our products at current levels or at all. We currently have long-term contracts with only two of our OEM customers. Failure of our OEM customers to achieve significant sales of products incorporating our products and fluctuations in the timing and volume of such sales could be harmful to our business. Failure of these customers to inform us of changes in their production needs in a timely manner could also hinder our ability to effectively manage our business.

We rely upon our OEM customers for information relating to the development of new products so that we are able to meet end-user demands.

We rely on our OEM customers to inform us of opportunities to develop new products that serve end-user demands. If our OEM customers do not present us with market opportunities early enough for us to develop products to meet end-user needs in a timely fashion, or if the OEMs fail to anticipate end-user needs at all, we may fail to develop new products or modify our existing products for the end-user markets for our products. In addition, if our OEM customers fail to accurately anticipate end-user demands, we may spend resources on products that are not commercially successful.

We depend on a distributor for the sale of our after-market products.

We primarily use one independent distributor to sell our after-market products. We have a distribution agreement with Globamatrix Holdings Pte. Ltd., or Globamatrix, under which we granted an exclusive worldwide license to distribute our after-market applied film in the automotive and architectural glass markets. Failure of Globamatrix to achieve significant sales of products incorporating our products and fluctuations in the timing and volume of such sales could be harmful to our business. We believe that the success of our after-market products will continue to depend upon this distributor.

We face intense competition, which could affect our ability to increase our revenue, maintain our margins and increase our market share.

The market for each of our products is intensely competitive and we expect competition to increase in the future. Competitors vary in size and in the scope and breadth of the products they offer. We compete both with companies using technology similar to ours and companies using other technologies or developing improved technologies. Direct-to-glass sputtering represents the principal alternative technology to our sputter-coated film products. Direct-to-glass is a mature, well-known process for applying thin film coatings directly to glass, which is used by some of our current and potential customers to produce products that compete with our products. This technology is commonly used to manufacture products that conserve energy in buildings and automobiles. Many of our current and potential competitors have significantly greater financial, technical, marketing and other resources than we have. In addition, many of our competitors have well-established relationships with our current and potential customers and have extensive knowledge of our industry.

25


We are dependent on key suppliers of materials, which may prevent us from delivering product in a timely manner.

We manufacture all of our products using materials procured from third-party suppliers. We do not have long-term contracts with our third-party suppliers. Certain of the materials we require are obtained from a limited number of sources. Delays or reductions in product shipments could damage our relationships with customers. Further, a significant increase in the price of one or more of the materials used in our products could have a material adverse effect on our cost of goods sold and operating results.

We are dependent on a few qualified subcontractors to add properties to some of our products.

We rely on third-party subcontractors to add properties, such as adhesives, to some of our products. There are only a limited number of qualified subcontractors that can provide some of the services we require, and we do not have long-term contracts with any of those subcontractors. Qualifying alternative subcontractors could take a great deal of time or cause us to change product designs. The loss of a subcontractor could adversely affect our ability to meet our scheduled product deliveries to customers, which could damage our relationships with customers. If our subcontractors do not produce a quality product, our yield will decrease and our margins will be lower. Further, a significant increase in the price charged by one or more of our subcontractors could force us to raise prices on our products or lower our margins, which could have a material adverse effect on our operating results.

We are dependent on key suppliers of production machines, which may prevent us from delivering an acceptable product on a timely basis and limit our capacity for revenue growth.

Our production machines are large, complex and difficult to manufacture. It can take up to a year from the time we order a machine until it is delivered. Following delivery, it can take us, with the assistance of the manufacturer, up to six additional months to test and prepare the machine for commercial production. There are a very limited number of companies that are capable of manufacturing these machines. Our inability in the future to have new production machines manufactured and prepared for commercial production in a timely manner would prevent us from delivering product on a timely basis and limit our capacity for revenue growth.

Fluctuations or slowdowns in the overall electronic display industry have and may continue to adversely affect our revenues.

Our business depends in part on sales by manufacturers of products that include electronic displays. The markets for electronic display products are highly cyclical and have experienced periods of oversupply resulting in significantly reduced demand for our products. For example, due to the deteriorating economic environment, sales by flat cathode ray tube manufacturers decreased in 2002 and further in 2003, contributing to our electronic display product revenues declining by 11% in 2002, and another 3% for 2003. Mitsubishi Electric was the only CRT manufacturer that buys our anti-reflective, or AR, film and it decided to consolidate all of the manufacturing of this product to Japan. In connection with that consolidation, Mitsubishi ceased production of the 17" AR product in its Mexico plant during the third quarter of 2003.
 
Performance, reliability or quality problems with our products may cause our customers to reduce or cancel their orders.

26


We manufacture our products based on specific, technical requirements of each of our customers. We believe that future orders of our products will depend in part on our ability to maintain the performance, reliability and quality standards required by our customers. If our products have performance, reliability or quality problems, then we may experience:

 
l
delays in collecting accounts receivable;

 
l
higher manufacturing costs;

 
l
additional warranty and service expenses; and

 
l
reduced or cancelled orders.

If we fail to recruit and retain a significant number of qualified technical personnel we may not be able to develop, enhance and introduce our products on a timely basis, and our business will be harmed.

We require the services of a substantial number of qualified technical personnel. Intense competition and aggressive recruiting, as well as a high-level of employee mobility characterize the market for skilled technical personnel. These characteristics make it particularly difficult for us to attract and retain the qualified technical personnel we require. We have experienced, and we expect to continue to experience, difficulty in hiring and retaining highly skilled employees with appropriate technical qualifications. It is especially difficult for us to recruit qualified personnel to move to the location of our Palo Alto, California offices because of the high-cost of living. If we are unable to recruit and retain a sufficient number of qualified technical employees, we may not be able to complete the development of, or enhance, our products in a timely manner. As a result, our business may be harmed and our operating results may suffer.

We may be unable to attract or retain the other highly skilled employees that are necessary for the success of our business.

In addition to our dependence on our technical personnel, our success also depends on our continuing ability to attract and retain other highly skilled employees. We depend on the continued services of our senior management, particularly Thomas G. Hood, our President and Chief Executive Officer. We do not have employment contracts with any of our officers or key-person life insurance covering any officer or employee. Our officers have technical and industry knowledge that cannot easily be replaced. Competition for similar personnel in our industry where we operate is intense. We have experienced, and we expect to continue to experience, difficulty in hiring and retaining highly skilled employees with appropriate qualifications. If we do not succeed in attracting or retaining the necessary personnel, our business could be adversely affected.

If we are unable to adequately protect our intellectual property, third parties may be able to duplicate our products or develop functionally equivalent or superior technology.

Our success depends in large part upon our proprietary technology. We rely on our know-how, as well as a combination of patent, trademark and trade secret protection, to establish and protect our intellectual property rights. Despite our efforts to protect our proprietary rights, unauthorized parties may attempt to copy aspects of our products or to obtain and use information that we regard as proprietary. Policing unauthorized use of our products is difficult. Our means of protecting our proprietary rights may not be adequate. In addition, the laws of some foreign countries do not protect our proprietary rights to as great an extent as do the laws of the United States. In the next three years, one of our U.S. patents relating to our architectural products will expire. Expiration of this patents or our failure to adequately protect our proprietary rights may allow third parties to duplicate our products or develop functionally equivalent or superior technology. In addition, our competitors may independently develop similar technology or design around our proprietary intellectual property.

27


Our business is susceptible to numerous risks associated with international operations.

Revenues from international sales amounted to approximately 76%, 79%, 89% and 85% of our net revenues during the first quarter of 2005 and fiscal years 2004, 2003 and 2002, respectively. The distance between our two manufacturing sites creates logistical and communications challenges. In addition, to achieve acceptance in international markets, our products must be modified to handle a variety of factors specific to each international market as well as local regulations. We may also be subject to a number of other risks associated with international business activities. These risks include:

 
l
unexpected changes in and the burdens and costs of compliance with a variety of foreign laws and regulatory requirements;

 
l
potentially adverse tax consequences; and

 
l
global economic turbulence and political instability.

If we fail to comply with environmental regulations, our operations could be suspended.

We use hazardous chemicals in producing our products and have air and water emissions that require controls. As a result, we are subject to a variety of local, state and federal governmental regulations relating to the storage, discharge, handling, emission, generation, manufacture and disposal of toxic or other hazardous substances used to manufacture our products, compliance with which is expensive. Our failure to comply with current or future regulations could result in the imposition of substantial fines on us, suspension of production, alteration of our manufacturing processes, increased costs or cessation of operations.

We rely on our domestic sales representatives, without whom our architectural product sales may suffer.

We use independent sales representatives to promote our Heat Mirror products to architects in the United States. If some or all of our sales representatives experience financial difficulties, or otherwise become unable or unwilling to promote our products, our business could be harmed. These sales representatives could reduce or discontinue promotion of our products. They may not devote the resources necessary to provide effective marketing support to us. In addition, we depend upon the continued viability and financial resources of these representatives, many of which are small organizations with limited working capital. These representatives, in turn, depend substantially on general economic conditions and other factors affecting the markets for the products they promote. We believe that our success in this market will continue to depend upon these sales representatives.

We may experience unanticipated warranty or other claims with respect to our products, which may lead to extensive litigation costs and expenses.

In the ordinary course of business, we have periodically become engaged in litigation principally as a result of disputes with customers of our architectural products. We have settled some of these suits and others are pending. We may become engaged in similar or other lawsuits in the future. Some of our products that have been the basis for lawsuits against us could be the basis for future lawsuits. An adverse outcome in the defense of a warranty or other claim could subject us to significant liabilities to third parties. Any litigation, regardless of the outcome, could be costly and require significant time and attention of key members of our management and technical personnel.

28


We may face extensive damages or litigation costs if our insurance carriers seek to have us indemnify them for settlements of past and outstanding litigation.

Several of our insurance carriers have reserved their rights to seek indemnification from us for substantial amounts paid to plaintiffs by the insurance carriers as part of settlements of litigation relating to our architectural products. Our insurance carriers in a case in which the plaintiff alleged we were responsible for defects in window products manufactured by others have advised us that they intend to seek reimbursement for settlement and defense costs. Any claims, with or without merit, could require significant time and attention of key members of our management and result in costly litigation.

29


Item 4—Controls and Procedures

a.
Evaluation and Disclosure Controls and Procedures. Under the supervision and with the participation of our management, including our chief executive officer and chief financial officer, we conducted an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures, as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended, as of April 3, 2005. Based on this evaluation, our chief executive officer and chief financial officer concluded as of the Evaluation Date that our disclosure controls and procedures were effective such that the information relating to the Company, including our consolidated subsidiaries, required to be disclosed in our Securities and Exchange Commission ("SEC") reports (i) is recorded, processed, summarized and reported with the time periods specified in SEC rules and forms, and (ii) is accumulated and communicated to our management, including our chief executive officer and chief financial officer, as appropriate to allow timely decisions regarding required disclosure.

b.
Report on Internal Control Over Financial Reporting. We will be required by the Sarbanes-Oxley Act to include an assessment of our internal control over financial reporting and an attestation from an independent registered public accounting firm in our Annual Report on Form 10-K beginning with the filing for our fiscal year ending December 31, 2006.

c.
Changes in Internal Controls. There were no changes in our internal controls over financial reporting identified that are reasonably likely to affect the internal controls over financial reporting.

30


PART II—OTHER INFORMATION
 
Item 1—Legal Proceedings

Litigation filed against the Company was described under Item 3 in the Company’s Form 10-K filed on March 30, 2005. No other material developments have occurred with respect to the litigation described therein. In addition, the Company is involved in certain other legal actions arising in the ordinary course of business. The Company believes, however, that none of these actions, either individually or in the aggregate, will have a material adverse effect on Southwall’s business, Southwall’s consolidated financial position, results of operations or cash flows.

Item 2— Unregistered Sales of Equity Securities and Use of Proceeds.

None.
 
Item 3—Defaults upon Senior Securities

Not applicable.
 
Item 4—Submission of Matters to a Vote of Stockholders

None.
 
Item 5—Other Information

None.
 
Item 6—Exhibits
 
(a)        Exhibits


Exhibit
 
Number
Item
   
Certification of Principal Executive Officer pursuant to Exchange Act Rules 13a-14 and 15d-14
   
Certification of Principal Financial Officer pursuant to Exchange Act Rules 13a-14 and 15d-14
   
Certification of Principal Executive Officer pursuant to 18 U.S.C Section 1350
   
Certification of Principal Financial Officer pursuant to 18 U.S.C Section 1350
   
99.1   Revolving Credit Loans Note-1 in the original principal amount of $3,000,000 dated April 28, 2005 and issued by the Company to Wells Fargo HSBC Trade Bank
   
99.2   Revolving Credit Loan Note-2 in the original principal amount of $3,000,000 dated April 28, 2005 and issued by the Company to Wells Fargo HSBC Trade Bank
   
99.3   Continuing Security Agreement Rights to Payment and Inventory dated April 28, 2005 between the Company and Wells Fargo HSBC Trade Bank
   
99.4   Credit Agreement dated April 28, 2005 between the Company and Wells Fargo HSBC Trade Bank
   
99.5  Form of Incentive Stock option Agreement for the Company's 1997 Stock Incentive Plan
   
99.6 Form of Non-Qualified Stock Option Agreement for the Company's 1997 Stock Incentive Plan
   
99.7 Form of Non-Qualified Stock Option Agreement for the Company's 1998 Stock Plan for Employees and Consultants
 
31


SIGNATURES
 
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
 
Dated:   May 12, 2005
 
 
 
 
Southwall Technologies Inc.
     
 
By:
/s/ Thomas G. Hood
 
 
Thomas G. Hood
 
 
President and Chief Executive Officer
     
 
By:
/s/ Maury Austin
 
 
Maury Austin
 
 
Senior Vice President and Chief Financial Officer
 
 
32