UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
(Mark one)
x | ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the fiscal year ended December 31, 2010
OR
¨ | TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the transition period from to
Commission file number 333-123708
COOPER-STANDARD HOLDINGS INC.
(Exact name of registrant as specified in its charter)
Delaware | 20-1945088 | |
(State or other jurisdiction of incorporation or organization) |
(I.R.S. Employer Identification No.) |
39550 Orchard Hill Place Drive
Novi, Michigan 48375
(Address of principal executive offices) (Zip Code)
Registrants telephone number, including area code: (248) 596-5900
Securities registered pursuant to Section 12(b) of the Act: None.
Securities registered pursuant to Section 12(g) of the Act:
Title of Each Class |
Name of Exchange on Which Registered | |
Common Stock, par value $0.001 per share | OTC Bulletin Board |
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ¨ No x
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ¨ No x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ¨ No x
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ¨ No ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrants knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. x
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of large accelerated filer, accelerated filer and smaller reporting company in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer |
¨ | Accelerated filer | ¨ | |||||
Non-accelerated filer |
x | Smaller reporting company | ¨ |
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No x
Indicate by check mark whether the registrant has filed all documents and reports required to be filed by Sections 12, 13 or 15(d) of the Securities Exchange Act of 1934 subsequent to the distribution of securities under a plan confirmed by a court. Yes x No ¨
The aggregate market value of voting and non-voting common stock held by non-affiliates as of June 30, 2010 was $258,799,060.
The number of the registrants shares of common stock, $0.001 par value per share, outstanding as of March 16, 2011 was 18,376,112 shares.
Documents Incorporated by Reference
Certain portions, as expressly described in this report, of the Registrants Proxy Statement for the 2011 Annual Meeting of Stockholders are incorporated by reference into Part III of this Annual Report on Form 10-K.
Page | ||||||
PART I | ||||||
Item 1. |
3 | |||||
Item 1A. |
18 | |||||
Item 1B. |
28 | |||||
Item 2. |
28 | |||||
Item 3. |
31 | |||||
Item 4. |
31 | |||||
PART II | ||||||
Item 5. |
32 | |||||
Item 6. |
33 | |||||
Item 7. |
Managements Discussion and Analysis of Financial Condition and Results of Operations |
35 | ||||
Item 7A. |
57 | |||||
Item 8. |
59 | |||||
Item 9. |
Changes in and Disagreements with Accountants on Accounting and Financial Disclosure |
122 | ||||
Item 9A. |
122 | |||||
Item 9B. |
123 | |||||
PART III | ||||||
Item 10. |
124 | |||||
Item 11. |
124 | |||||
Item 12. |
Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters |
124 | ||||
Item 13. |
Certain Relationships and Related Transactions and Director Independence |
125 | ||||
Item 14. |
125 | |||||
PART IV | ||||||
Item 15. |
126 | |||||
131 |
Item 1. | Business |
Cooper-Standard Holdings Inc. (together with its consolidated subsidiaries, the Company, Cooper-Standard, we or us) is a leading manufacturer of fluid handling, body sealing, and Anti-Vibration Systems (AVS) components, systems, subsystems, and modules. Our products are primarily for use in passenger vehicles and light trucks that are manufactured by global automotive original equipment manufacturers (OEMs) and replacement markets. We conduct substantially all of our activities through our subsidiaries.
We believe that we are the largest global producer of body sealing systems, the second largest global producer of the types of fluid handling products that we manufacture and one of the largest North American producers of AVS business. We design and manufacture our products in each major region of the world through a disciplined and sustained approach to engineering and operational excellence. We operate in 66 manufacturing locations and nine design, engineering, and administrative locations in 18 countries around the world.
Approximately 81% of our sales in 2010 were to OEMs, including Ford Motor Company (Ford), General Motors Company (GM), and Chrysler Group LLC ( Chrysler ) (collectively, the Detroit 3), Fiat, Volkswagen/Audi Group, Renault/Nissan, PSA Peugeot Citroën, Daimler, BMW, Toyota, Volvo, Jaguar/Land Rover and Honda. The remaining 19% of our 2010 sales were primarily to Tier I and Tier II automotive suppliers and non-automotive manufacturers. In 2010, our products were found in each of the 20 top-selling models in North America and in 19 of the 20 top-selling models in Europe. Our principal executive offices are located at 39550 Orchard Hill Place Drive, Novi, Michigan 48375, and our telephone number is (248) 596-5900. Additional information is available at our website at www.cooperstandard.com, which is not a part of this Annual Report on Form 10-K.
Corporate History and Business Developments
Cooper-Standard Holdings Inc. was formed and capitalized in 2004 as a Delaware corporation and began operating on December 23, 2004 when it acquired the automotive segment of Cooper Tire & Rubber Company (the 2004 Acquisition). Cooper-Standard Holdings Inc. operates the business primarily through its principal operating subsidiary, Cooper-Standard Automotive Inc.
In February 2006, we acquired fifteen fluid handling systems operations in North America, Europe and China (collectively, FHS) from ITT Industries, Inc. In August 2007, we acquired Metzeler Automotive Profile Systems sealing systems operations (MAPS) from Automotive Sealing Systems S.A. We completed a related acquisition of a joint venture interest in India (MAP India) in December 2007. In addition to the FHS and MAPS acquisitions, we acquired a hose manufacturing operation in Mexico from the Gates Corporation and a fuel rail manufacturing operation in Mexico from Automotive Component Holdings, LLC, in 2005 and 2007, respectively.
We operate from two divisions, North America and International (covering Europe, South America and Asia). This operating structure allows us to maintain our full portfolio of global products, as well as support our regional and global customers with complete engineering and manufacturing expertise in all major regions of the world.
We have implemented a number of restructuring initiatives in recent years, including the global restructuring of our operating structure in 2009 as well as the closure of facilities in North America, Europe and Asia. For information on these restructuring initiatives, see Note 5. Restructuring to the consolidated financial statements.
3
Reorganization
On August 3, 2009, Cooper-Standard Holdings Inc. and each of its direct and indirect wholly-owned U.S. subsidiaries (the Debtors) filed voluntary petitions for relief under chapter 11 (Chapter 11) of title 11 of the United States Code (the Bankruptcy Code), in the United States Bankruptcy Court for the District of Delaware (the Bankruptcy Court). On August 4, 2009, our Canadian subsidiary, Cooper-Standard Automotive Canada Limited (CSA Canada) commenced proceedings seeking relief from its creditors under Canadas Companies Creditors Arrangement Act in the Ontario Superior Court of Justice (Commercial List) in Toronto, Canada (the Canadian Court). Our subsidiaries and operations outside the United States and Canada were not included in the Chapter 11 cases or the Canadian proceedings (other than CSA Canada) and continued to operate in the ordinary course of business.
On March 26, 2010, the Debtors filed with the Bankruptcy Court their Second Amended Joint Chapter 11 Plan of Reorganization (as amended and supplemented, the Plan of Reorganization) and their First Amended Disclosure Statement with the Bankruptcy Court. On May 12, 2010, the Bankruptcy Court entered an order confirming our Plan of Reorganization. The Canadian Court sanctioned CSA Canadas second amended plan of compromise and arrangement on April 16, 2010.
On May 27, 2010, the effective date of our Plan of Reorganization, we consummated the reorganization and emerged from Chapter 11.
Following the effective date of our Plan of Reorganization, our capital structure consisted of the following:
| Senior ABL Facility. A senior secured asset-based revolving credit facility in the aggregate principal amount of $125 million (the Senior ABL Facility), which contains an uncommitted $25 million accordion facility that will be available at our request if the lenders, at the time, consent. |
|
8 1/2% Senior Notes due 2018. $450 million of senior unsecured notes (the Senior Notes) that bear interest at 8 1/2% per annum and mature on May 1, 2018. |
| Common stock, 7% preferred stock and warrants. Equity securities comprised of (i) 17,489,693 shares of our common stock, (ii) 1,000,000 shares of our 7% cumulative participating convertible preferred stock (7% preferred stock), which are initially convertible into 4,290,788 shares of our common stock, and (iii) 2,419,753 warrants (warrants) to purchase up to an aggregate of 2,419,753 shares of our common stock. |
In addition, on the effective date of our Plan of Reorganization, we issued to certain officers and key employees (i) 757,896 shares of our common stock as restricted stock, plus an additional 104,075 shares of our common stock as restricted stock that may be reduced subject to realized dilution on the warrants, (ii) 41,664 shares of our 7% preferred stock as restricted 7% preferred stock and (iii) 702,509 options to purchase shares of common stock, plus an additional 78,057 options to purchase shares of our common stock that may be reduced subject to realized dilution on the warrants. On the day after the effective date of our Plan of Reorganization, we issued to certain of our directors and Oak Hill Advisors L.P. and its affiliates 26,448 shares of our common stock as restricted stock and 58,386 options to purchase shares of our common stock. We also reserved up to 780,566 shares of our common stock for future issuance to management and board of directors. On July 19, 2010 we paid a dividend to holders of our outstanding 7% preferred stock in the form of 10,780 additional shares of 7% preferred stock.
On the effective date of our Plan of Reorganization, our prepetition equity, debt and certain other obligations were cancelled, terminated and repaid, as applicable, as follows:
| Our prepetition common stock and other equity interests were cancelled, and no distributions were made to former equity-holders. |
4
| All outstanding obligations under our prepetition senior notes and prepetition senior subordinated notes were cancelled and the indentures governing these obligations were terminated in exchange for shares and warrants. |
| Our prepetition credit agreement and the Debtors Debtor-in-Possession Credit Agreement (the DIP credit agreement) were paid in full. |
The consolidated financial statements for the reporting entity subsequent to emergence from Chapter 11 bankruptcy proceedings (the Successor) are not comparable to the consolidated financial statements for the reporting entity prior to emergence from Chapter 11 bankruptcy proceedings (the Predecessor).
Business Strategy
Sustain and improve operational excellence to strengthen global organization
We seek to optimize our business and cost structure to keep pace with the rapidly changing global automotive industry, with an emphasis on reducing our overall cost structure and making our manufacturing operations more efficient. Our primary areas of focus are:
| Identifying and implementing lean manufacturing initiatives. Our lean manufacturing initiatives focus on optimizing manufacturing by eliminating waste, controlling costs and enhancing productivity. Lean manufacturing initiatives have been implemented at each of our manufacturing and design facilities and continue to be an important element in sustaining our operational excellence. |
| Expand global footprint. We are supplementing our Western European operations with Central and Eastern European facilities to support our customers evolving footprints. In addition, we continue to expand our operations in China, India and Mexico. |
| Consolidating facilities to reduce cost structure and improve capacity utilization. Our capacity utilization efforts are designed to streamline our global operations and include taking advantage of opportunities to reduce our overall cost structure by consolidating and closing facilities. For example, in the second half of 2009, we closed two manufacturing facilities, one located in Ohio and another located in Germany, and in March 2010, we announced the closure of our manufacturing facility in Spain. Also, in February 2011, we announced the closure of a manufacturing facility in Ohio. We will continue to take a disciplined approach to evaluating opportunities that would improve our efficiency, profitability and cost structure. |
| Maintaining flexibility in all areas of our operations. Our operational capital needs are generally lower than many companies in our industry and a major portion of our manufacturing machinery is movable from job-to-job, providing us flexibility in adapting to market changes and serving customers worldwide. |
Leverage Technology for Innovation and Growth
We will draw on our technical expertise to provide customers with innovative solutions. Our engineers combine product design with a broad understanding of material options for enhanced vehicle performance. We believe our reputation for successful innovation in product design and material usage is the reason our customers consult us early in their vehicle development and design process of their next generation vehicles.
Recent innovations that highlight our ability to combine materials and product design expertise can be found in the following products:
| Safe Seal. Safe Seal is a body sealing product featuring sensors built into the seal capable of reversing power windows, doors and partitions to prevent injury. |
| Our new Multi-State Mount. The vacuum actuated mount responds to bi-modal and tri-modal inputs from the onboard vehicle computer. As a result of receiving inputs from the on-board vehicle computer |
5
we are now able to more precisely tune the mounts in real time to the engine/vehicle frequency characteristics allowing us to dissipate engine noise and vibration during varying driving/road conditions. |
| Direct Injection Fuel Rail. Direct Injection Fuel Rails draw upon our innovative welding and brazing processes as well as our understanding of metal dynamics to create high pressure capability. This allows us to provide fuel rails for advanced direct injection engines which improve fuel economy and performance. |
| Stratlink. Utilizing our internal material engineering capabilities, we have developed a rubber compound that performs equally with externally sourced compounds, which will significantly reduce cost. |
| PlastiCool. PlastiCool is a low cost, low weight, high temperature alternative to metal and rubber hose currently used in transmission cooling that offers a more robust joint design, improving quality and potentially reducing warranty costs. Additionally, because the material is smaller than current alternatives, it allows for greater design flexibility. |
Continued emphasis on fuel efficiency, global platforms and emerging markets
We believe that by focusing on fuel efficiency, global platforms and emerging markets, we will be able to solidify and expand our global leadership position.
| Fuel efficiency. With the recent shift in customer preferences toward light weight, fuel efficient vehicles, we intend to target small car, hybrid and alternative powertrains and increase the content we provide to these platforms. We believe that furthering our position in the small car and hybrid market and alternative powertrains market will allow us to increase market share, create greater economies of scale and provide more opportunities to partner with customers. |
| Global platforms. Our global presence makes us one of the select few manufacturers in our product areas who can take advantage of the many business opportunities that are becoming available worldwide as a result of the OEMs expanding emphasis on global platforms. Ten of our top twenty global vehicles in the fourth quarter of 2010 were based on global platforms which is evidence that customers look to us for global vehicle platform support. |
| Emerging markets. China, India and South America will continue to be regions of emphasis as their light vehicle market is projected to grow substantially as their economies continue to develop. In fact, seventy percent of global vehicle production is expected to come from emerging markets over the next five years (IHS Global Vehicle Production Forecast September 28, 2010). |
Developing systems solutions and other value-added products
We believe that significant opportunities exist to grow by providing complete subsystems, modules and assemblies. As a leader in design, engineering and technical capabilities, we focus on improving products, developing new technologies and implementing more efficient processes in each of our product lines. Our body sealing products are visible to vehicle passengers and can enhance the vehicles aesthetic appeal, in addition to creating a barrier to wind, precipitation, dust and noise. Our AVS products are an important contributor to vehicle quality, significantly improving ride and handling. Our fluid handling modules and subsystems are designed to increase functionality and decrease costs to the OEM, which can be the deciding factor in winning new business.
Pursue acquisitions and alliances to enhance capabilities and accelerate growth
We intend to continue to selectively pursue complementary acquisitions and joint ventures to enhance our customer base, geographic penetration, scale and technology. Consolidation is an industry trend and is
6
encouraged by the OEMs desire for fewer supplier relationships. We believe we have a strong platform for growth through acquisitions based on our past integration successes, experienced management team, global presence and operational excellence. In addition, we believe joint ventures allow us to penetrate new markets with less risk and capital investment than acquisitions. We currently operate through several successful joint ventures, including those with Nishikawa Rubber Company, Zhejiang Saiyang Seal Products Co., Ltd., Guyoung Technology Co. Ltd. (Guyoung), Hubei Jingda Precision Steel Tube Industry Co., Ltd. (Jingda), Huayu- Cooper Standard Sealing Systems Co. Ltd. (HASCO) an affiliate of Shanghai Automotive Industry Corporation, and Toyoda Gosei Co., Ltd. (Toyoda Gosei).
Developing business in non-automotive markets
While the automotive industry will continue to be our core business, we supply other industries with products using our expertise and material compounding capabilities. For example, we supply parts to customers in the technical rubber business and develop and produce synthetic rubber products for a variety of industry applications, including aircraft flooring, commercial flooring, insulating sheets for power stations, non-slip step coverings and rubber for appliances and construction applications. In our technical rubber business we fabricate products from a wide variety of elastomer compounds and can custom fit many applications.
Products
We supply a diverse range of products on a global basis to a broad group of customers across a wide range of vehicles. Our principal product lines are body and chassis products and fluid handling products. For the years ended December 31, 2008, 2009, and 2010, body and chassis products accounted for 66%, 65% and 66%, respectively, of our sales, and fluid handling products accounted for 34%, 35% and 34%, respectively, of our sales. The top ten vehicle platforms we supply accounted for approximately 28% of our sales in 2008, 32% of our sales in 2009 and 33% of our sales in 2010. Our principal product lines are described below.
Product Lines |
Solutions |
Products & Modules |
Market Position* | |||||
Body & Chassis: |
||||||||
Body Sealing | Protect vehicle interiors from weather, dust and noise intrusion | Extruded rubber and thermoplastic sealing, weather strip assemblies and encapsulated glass products | #1 globally | |||||
Anti-Vibration | Control and isolate noise and vibration in the vehicle to improve ride and handling | Engine and body mounts, dampers, isolators, springs, stamped or cast metal products and rubber products | #3 North America | |||||
Fluid Handling | Control, sense, measure and deliver fluids and vapors throughout the vehicle | Pumps, tubes and hoses, connectors and valves (individually and in systems and subsystems) | #2 globally |
* | Market positions are managements estimates, which are based on reports prepared by industry consultants commissioned by us in 2008. |
Body & chassis products
We are a leading global supplier of automotive body sealing and AVS products. Body sealing products protect vehicle interiors from weather, dust and noise intrusion. AVS products isolate and reduce noise and vibration to improve ride and handling. Body sealing and AVS products lead to a better driving experience for all occupants. For the years ended December 31, 2008, 2009 and 2010, we generated approximately 66%, 65% and 66%, respectively, of total corporate revenue from the sale of body and chassis products (before corporate eliminations).
7
Body sealing
Based on third party analysis, we are the leading global supplier of body sealing products to the automotive industry. We are known throughout the industry to be a leader in providing innovative design and manufacturing solutions for complex automotive designs.
Our body sealing products are comprised of ethylene propylene diene M-class rubber, (EPDM-synthetic rubber) and thermoplastic elastomers, or TPE. The typical production process involves mixing of rubber compounds, extrusion (supported with metal and woven wire carriers or unsupported), cutting, notching, forming, injection molding and assembly. Below is a description of our primary sealing products:
Product Category |
Description | |
Dynamic seals |
Designed and used for areas of the vehicle in which a gap exists between the vehicle body and movable closures. The seals function to isolate cockpit occupants and engine components from exterior climate conditions such as wind noise and water, providing the occupants with an improved vehicle experience.
Door seals: Sectional seal design that fits the door structure and body cabin to seal rain, dust, and noise from the occupants of vehicles.
Body seals: Secondary seal used to provide further noise and aesthetic coverage of welt flanges on the vehicle body.
Hood seals: Located on body flanges in the engine compartment protecting against water and dust penetration while also reducing engine and road noise in the vehicle cabin during high speed travel.
Trunk lid and lift gate seals: Located on body flanges in the trunk or lift gate compartment offering protection against water and dust penetration.
Lower door seals/rocker seals: Offers protection in the rocker area against water and dust penetration. Reduces road noise from entering the cabin during high speed driving.
Sunroof seals: Creates a narrow sealing space and minimize resistance for the sunroof. | |
Static seals |
Designed for stationary areas of the vehicle body. The seals function to isolate cockpit occupants from exterior climate conditions such as wind noise and water for improved vehicle experience.
Belt line seal: Provides protection against water, dust and noise for driver and passenger door movable glass.
Glass run assembly: Enables the movable door glass and door to form one surface, improving glass movement and sealing the vehicle cabin from the exterior environment. | |
Quarter window trim/glass encapsulation: Integral pillar moldings and decorative plastic or metal corner trims seal fixed quarter side glass windows.
Appliqués: Also referred to as greenhouse moldings, these seals act as an aesthetic covering for A, B and C pillars. | ||
Convertible seals |
Sealing materials that combine compressibility with superior design for use on a convertible vehicle soft top weather sealing application. |
8
AVS
Based on third party analysis, we are one of the leading suppliers of AVS products in North America. We are known in North America for utilizing our advanced development and testing of AVS products and subsystems to provide innovative solutions.
Our AVS products include components manufactured with various types of rubbernatural rubber, butyl or EPDM in combination with stamped steel, aluminum or cast iron sub-components. Additionally, we supply brackets that are manufactured from stamped steel, aluminum or cast iron as individual final products. The typical production process for a rubber and metal product involves mixing of rubber compounds, metal preparation (cleaning and primer application), injection molding of the rubber and metals, final assembly and testing as required based on specific products. Below is a description of our primary chassis products:
Product Category |
Description | |
Body/cradle mounts |
Enable isolation of the interior cabin from the vehicle body reducing noise, vibration and harshness.
Hydro body mounts: A body mount filled with fluid providing spring rate and damping performance that varies according to frequency and displacement of vibration. Conventional (non-hydro) mounts provide fixed response. Hydromounts can provide a more comfortable ride in a vehicle during idling or traveling. | |
Powertrain mounts |
Secures and isolates vehicle powertrain noise, vibration, and harshness from the uni-body or frame.
Transmission mounts: Enables mounting of transmission to vehicle body while reducing vibration and harshness from the powertrain.
Torque strut: Controls the fore and aft movement of transverse mounted engines within their compartment while isolating engine noise and vibration from the vehicle body.
Hydro engine mounts: This technology applies the same principles as the above mentioned hydro body mounts specific for an engine application.
Multi-State Engine Mounts: This new innovative technology responds up to three separate inputs from the on- board vehicle computer and utilizing vacuum actuation. The Multi State Mount is designed to improve isolation and ride control for Wide Open Throttle (WOT) and Part Open Throttle (POT), as well as provide increased rigidity during highway cruising. | |
Suspension |
Provides for needed flexibility in suspension components and eliminates noise vibration from entering the interior cabin.
Hydrobushing: Similar benefits to hydromounts; however, these are designed to be installed in a link or control versus a bracket attached to a vehicle.
Mass damper: Developed to counteract a specific resonance at a specific frequency to eliminate undesirable vibration. |
Fluid handling products
We are one of the leading global integrators of fluid subsystems and components that control, sense and deliver fluids and vapors in motor vehicles. We believe we are the second largest global provider of fluid handling system products manufactured in our industry. We offer an extensive product portfolio and are positioned to serve our diverse customer base around the world. Utilizing our core competencies in thermal management, emissions management and fuel and brake delivery systems, we strive to create the highest value for our global customers by engineering unique solutions that anticipate and exceed their needs through Design
9
for Six Sigma, seamless launches, lean enterprise principles and key strategic alliances. For the years ended December 31, 2008, 2009 and 2010, we generated approximately 34%, 35% and 34% of total corporate revenue from the sale of fluid handling products (before corporate eliminations).
We support the green technology trend as our customers expand towards hybrids and alternative powertrains required to meet future fuel efficiency demands. We provide thermal management solutions that enhance hybrid and electric vehicle powertrain cooling systems and offer bio-fuel compatible materials for alternative fuel vehicles. Our products support improved fuel economy initiatives with light weight, high performance plastic and aluminum materials that reduce weight and offer an improved value equation. We specialize in complete fuel system integration encompassing products from the fuel rail to the fuel tank lines. We support reduced emissions through the control of the flow and temperature of exhaust gas.
Our fluid handling products are principally found in four major vehicle systems: thermal management; fuel and brake; emissions management; and power management. Below is a description of our primary fluid handling products:
Product Category |
Description | |||
Thermal Management |
Direct, control and transport oil, coolant, water and other fluids throughout the vehicle | |||
Engine oil cooling subsystems with over-molded connections | Transmission oil cooling subsystems | |||
Engine oil cooler tube and hose assemblies | Transmission oil cooler tube and hose assemblies | |||
Engine oil cooling quick connects | Engine oil level indicator tube assemblies | |||
Electro/mechanical water valves and pumps | Integrated thermostats and plastic housings | |||
Coolant subsystems | Bypass valves | |||
Radiator and heater hoses | Auxiliary oil coolers | |||
Fuel & Brake |
Direct, control and transport fuel, brake fluid and vapors throughout the vehicle | |||
Fuel supply and return lines | Flexible brake lines | |||
Fuel/Vapor quick connects | Vacuum brake hoses | |||
Fuel/Vapor lines | ||||
Emissions Management |
Direct, control and transmit emission vapors and fluids throughout the vehicle | |||
Fully integrated exhaust gas recirculation modules | Exhaust gas recirculation valves | |||
EGR coolers and bypass coolers | DPF lines | |||
Exhaust gas recirculation tube assemblies | Secondary air tubes | |||
Power Management |
Direct, control and transmit power management fluids throughout the vehicle | |||
High pressure roof lines | Power steering pressure and return lines | |||
Hydraulic clutch lines | Air bag tubes |
10
Supplies and Raw Materials
Raw material prices have fluctuated greatly in recent years. We have implemented strategies with both our suppliers and our customers to help manage spikes in raw material prices. These actions include material substitutions and leveraging our global purchases. Global optimization also includes using benchmarks and selective sourcing from low cost regions. We have also made process improvements to ensure the most efficient use of materials through scrap reduction, as well as standardization of material specification to maximize leverage over a higher volume purchase.
The primary raw materials for our business include fabricated metal-based components, synthetic rubber, carbon black, natural rubber, process oil and plastic components.
Patents and Trademarks
We believe one of our competitive advantages is our application of technological innovation to customer challenges. We hold over 300 patents in key product technologies, such as Daylight Opening Modules, Engineered Stretched Plastics, Low Fuel Permeation Nylon Tubing and Quick Connect Fluid Couplings, as well as core process methods, such as molding, joining, and coating. Our patents are grouped into two major categories: (1) products, which relate to specific product invention claims for products which can be produced, and (2) processes, which relate to specific manufacturing processes that are used for producing products. The vast majority of our patents fall within the products category. We consider these patents to be of value and seek to protect our rights throughout the world against infringement. While in the aggregate these patents are important to our business, we do not believe that the loss or termination of any one patent would materially affect our company. We continue to seek patent protection for our new products. Additionally, we develop significant technologies that we treat as trade secrets and choose not to disclose to the public through the patent process, but which nonetheless provide significant competitive advantages and contribute to our global leadership position in various markets.
We also have technology sharing and licensing agreements with various third parties, including Nishikawa Rubber Company, one of our joint venture partners in body sealing products. We have mutual agreements with Nishikawa Rubber Company for sales, marketing and engineering services on certain body sealing products we sell. Under those agreements, each party pays for services provided by the other and royalties on certain products for which the other party provides design or development services.
We own or have licensed several trademarks that are registered in many countries, enabling us to protect and market our products worldwide. Key trademarks include StanPro® (aftermarket trim seals), SafeSeal (obstacle detection sensors), and Stratlink (proprietary TPV polymer).
Seasonality
Historically, sales to automotive customers are lowest during the months prior to model changeovers and during assembly plant shutdowns. However, economic conditions and consumer demand may change the traditional seasonality of the industry and lower production may prevail without the impact of seasonality. Historically, model changeover periods have typically resulted in lower sales volumes during July, August and December. During these periods of lower sales volumes, profit performance is reduced but working capital often improves due to the continued collection of accounts receivable.
Competition
We believe that the principal competitive factors in our industry are price, quality, service, performance, design and engineering capabilities, innovation and timely delivery. We believe that our capabilities in these core competencies are integral to our position as a market leader in each of our product lines. Our body and chassis
11
products compete with Toyoda Gosei, Trelleborg, Tokai, Vibracoustic, Paulstra, Hutchinson, Henniges, SaarGummi and Standard Profil, among others. Our fluid handling products compete with TI Automotive, Martinrea, Hutchinson, Conti-Tech, Pierburg and Gustav Wahler, along with numerous smaller companies in this competitive market.
Industry Structure
The automotive industry is one of the worlds largest and most competitive. Consumer demand for new vehicles largely determines sales and production volumes of global OEMs, and component suppliers rely on high levels of vehicle sales and production to be successful.
The automotive supplier industry is generally characterized by high barriers to entry, significant start-up costs and long-standing customer relationships. The criteria by which OEMs judge automotive suppliers include price, quality, service, performance, design and engineering capabilities, innovation, timely delivery and, more recently, financial stability. Over the last decade, those suppliers that have been able to achieve manufacturing scale, reduce structural costs, diversify their customer base and establish a global manufacturing footprint have been successful.
Among the leading drivers of new vehicle demand is the availability of consumer credit to finance purchases. Beginning in late 2008, turmoil in the global credit markets and the recession in the United States and global economies led to a severe contraction in the availability of consumer credit. As a result, global vehicle sales volumes plummeted, led by severe declines in the mature North American and European markets. During 2009, North American light vehicle industry production declined by approximately 32% from 2008 levels to 8.6 million units, while European light vehicle industry production declined by approximately 20% from 2008 levels to 16.3 million units. The decline was less pronounced in Asia, where volumes were down only approximately 1% from 2008 levels to 26.6 million units. This resilience was largely attributable to the continued expansion of the Chinese and Indian markets, both of which are expected to continue to increase as a share of the global automotive market in the coming years.
The severe decline in vehicle sales and production in 2009 led to major restructuring activity in the industry, particularly in North America. GM and Chrysler reorganized through Chapter 11 bankruptcy proceedings and the Detroit 3 undertook other strategic actions, including the divestiture or discontinuance of non-core businesses and brands and the acceleration or broadening of operational and financial restructuring activities. A number of significant automotive suppliers, including us, restructured through Chapter 11 bankruptcy proceedings or through other means.
Several significant trends and developments are now contributing to improvement in the automotive supplier industry. These include improved retail vehicle sales and production in North America in the fourth quarter of 2009 and throughout 2010, a more positive credit environment, the continued growth of new markets in Asia, particularly China, and increased emphasis on green and other innovative technologies.
Customers
We are a leading supplier to the Detroit 3 in each of our product categories and are increasing our presence with European and Asian OEMs. During the year ended December 31, 2010, approximately 28%, 16%, 7%, 6% and 6% of our sales were to Ford, GM, Fiat, Volkswagen/Audi and Chrysler, respectively, as compared to 31%, 14%, 8%, 7% and 4%, respectively, for the year ended December 31, 2009. Our other major customers include OEMs such as Renault/Nissan, PSA Peugeot Citroën, BMW, Daimler and various Indian and Chinese OEMs. We also sell products to Visteon/ACH, Toyota, Porsche, and through Nishikawa Standard Company (NISCO), Honda. Our business with any given customer is typically split among several contracts for different parts on a number of platforms.
12
Backlog
Our OEM sales are generally based upon purchase orders issued by the OEMs, with updated releases for volume adjustments, and as such we do not have a backlog of orders at any point in time. Once selected to supply products for a particular platform, we typically supply those products for the platform life, which is normally six to eight years, although there is no guarantee that this will occur. In addition, when we are the incumbent supplier to a given platform, we believe we have a competitive advantage in winning the redesign or replacement platform.
Research and Development
We operate nine design, engineering, and administration facilities throughout the world and employ approximately 465 research and development personnel, some of whom reside at our customers facilities. We utilize Design for Six Sigma and other methodologies that emphasize manufacturability and quality. We are aggressively pursuing innovations which assist in resource conservation with particular attention to developing materials that are lighter weight and made of recyclable materials. Our development teams are also working closely with our customers to design and deliver thermal management solutions for cooling electric motors and batteries for new hybrids. We also devote considerable research and development resources into AVS, resulting in high value, state-of-the-art solutions for our customers. These activities are applied not only in our AVS product lines, but also in vehicle sealing (noise transmission isolation and abatement via vehicle windows and doors), fuel delivery systems (isolation of fuel injectors on fuel rails) and thermal management (noise and vibration free coolant pumps and valves). We spend significantly each year to maintain and enhance our technical centers, enabling us to quickly and effectively respond to customer demands. We spent $81.9 million, $62.9 million, and $68.8 million in 2008, 2009, and 2010, respectively, on research and development.
Joint Ventures and Strategic Alliances
Joint ventures represent an important part of our business, both operationally and strategically. We have used joint ventures to enter into new geographic markets such as China, Korea, and India, to acquire new customers and to develop new technologies. In entering new geographic markets, teaming with a local partner can reduce capital investment by leveraging pre-existing infrastructure. In addition, local partners in these markets can provide knowledge and insight into local practices and access to local suppliers of raw materials and components. In North America, joint ventures have proven valuable in establishing new relationships with North American manufacturers. For example, we have business with Honda through our NISCO joint venture. In 2005, we acquired a 20% equity interest in and expanded our technical alliance with Guyoung, a Korean supplier of metal stampings, which built a manufacturing facility in Alabama that services Hyundai. As part of the acquisition of the MAPS business in 2007, we acquired a 47.5% equity interest in Huayu-Cooper Standard Sealing Systems Co. Ltd. (formerly known as Shanghai SAIC-Metzler Sealing Systems Co. Ltd.), a joint venture with Shanghai Automotive Industry Corporation, which also owns a 47.5% equity interest, and Shanghai Qinpu Zhaotun Collective Asset Management Company, which owns the remaining 5% equity interest. This joint venture business is the leading manufacturer of automotive sealing products in China. Also, in 2007, we acquired a 74% equity interest in MAP India, a joint venture with Toyoda Gosei Co., Ltd., which owns the remaining 26% equity interest. MAP India is a leading manufacturer of automotive sealing products in India.
Geographic Information
In 2010, we generated approximately 52% of our sales in North America, 34% in Europe, 6% in South America and 8% in Asia/Pacific. Approximately 27% of our sales were generated from our United States operations and approximately 73% of our sales were generated from our operations in all other countries, including 14%, 11% and 10% generated from our Mexican, German and Canadian operations, respectively.
13
In 2009, we generated approximately 47% of our sales in North America, 40% in Europe, 6% in South America and 7% in Asia/Pacific. Approximately 27% of our sales were generated from our United States operations and approximately 73% of our sales were generated from our operations in all other countries, including 14%, 11% and 9% generated from our German, Mexican and Canadian operations, respectively.
In 2008, we generated approximately 48% of our sales in North America, 42% in Europe, 5% in South America and 5% in Asia/Pacific. Approximately 26% of our sales were generated from our United States operations and approximately 74% of our sales were generated from our operations in all other countries, including 17%, 12% and 10% generated from our German, Canadian and Mexican operations, respectively.
Employees
As of December 31, 2010, we had approximately 19,000 full-time and temporary employees. We maintain good relations with both our union and non-union employees and, in the past ten years, have not experienced any major work stoppages. We renegotiated some of our domestic and international union agreements in 2010 and have several contracts set to expire in the next twelve months. As of December 31, 2010, approximately 31% of our employees were represented by unions and approximately 14% of the unionized employees were located in the United States.
Environmental
We are subject to a broad range of federal, state, and local environmental and occupational safety and health laws and regulations in the United States and other countries, including regulations governing: emissions to air, discharges to water, noise and odor emissions; the generation, handling, storage, transportation, treatment, and disposal of waste materials; the cleanup of contaminated properties; and human health and safety. We may incur substantial costs associated with hazardous substance contamination or exposure, including cleanup costs, fines, and civil or criminal sanctions, third party property or natural resource damage, personal injury claims, or costs to upgrade or replace existing equipment as a result of violations of or liabilities under environmental laws or the failure to maintain or comply with environmental permits required at our locations. In addition, many of our current and former facilities are located on properties with long histories of industrial or commercial operations and some of these properties have been subject to certain environmental investigations and remediation activities. We maintain environmental reserves for certain of these sites, which we believe are adequate. Because some environmental laws (such as the Comprehensive Environmental Response, Compensation and Liability Act and analogous state laws) can impose liability retroactively and regardless of fault on potentially responsible parties for the entire cost of cleanup at currently or formerly owned or operated facilities, as well as sites at which such parties disposed or arranged for disposal of hazardous waste, we could become liable for investigating or remediating contamination at our current or former properties or other properties (including offsite waste disposal locations). We may not always be in complete compliance with all applicable requirements of environmental laws or regulations, and we may receive notices of violation or become subject to enforcement actions or incur material costs or liabilities in connection with such requirements. In addition, new environmental requirements or changes to interpretations of existing requirements, or in their enforcement, could have a material adverse effect on our businesses, results of operations, and financial condition. For example, while we are not large emitters of greenhouse gases, laws, regulations and certain regional initiatives under consideration by the U.S. Congress, the U.S. Environmental Protection Agency, and various states, and in effect in certain foreign jurisdictions, could result in increased operating costs to control and monitor such emissions. We have made and will continue to make expenditures to comply with environmental requirements. While our costs to defend and settle claims arising under environmental laws in the past have not been material, such costs may be material in the future.
Market Data
Some market data and other statistical information used throughout this Annual Report on Form 10-K is based on data available from IHS Automotive (formerly CSM Worldwide), an independent market research firm.
14
Other data is based on good faith estimates, which are derived from our review of internal surveys, as well as third party sources. Although we believe all of these third party sources are reliable, we have not independently verified the information and cannot guarantee its accuracy and completeness. To the extent that we have been unable to obtain information from third party sources, we have expressed our belief on the basis of our own internal analyses of our products and capabilities in comparison to our competitors.
Available Information
We make available free of charge on or through our Internet website (http://www.cooperstandard.com) our Annual Report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, (the Exchange Act), as soon as reasonably practicable after we electronically file such material with, or furnish it to, the U.S. Securities and Exchange Commission (SEC).
Executive Officers
Set forth below is certain information with respect to the current executive officers of the Company.
Name |
Age | Position | ||||
James S. McElya |
63 | Chairman, Director and Chief Executive Officer | ||||
Edward A. Hasler(1) |
61 | President | ||||
Allen J. Campbell |
53 | Executive Vice President and Chief Financial Officer | ||||
Keith D. Stephenson |
50 | Chief Operating Officer | ||||
Michael C. Verwilst |
57 | Vice President, Mergers & Acquisitions | ||||
Timothy W. Hefferon |
57 | Vice President, General Counsel and Secretary | ||||
Kimberly Dickens |
49 | Vice President, Human Resources | ||||
Helen T. Yantz |
50 | Vice President and Corporate Controller |
(1) | On December 9, 2010, Mr. Hasler notified the Company that he would be retiring from his position as President of the Company effective July 1, 2011. |
James S. McElya is the Chairman of our board of directors and our Chief Executive Officer, a position he has held since March 2009 and previously held from September 2006 to July 2008. He served as executive Chairman from July 2008 to March 2009. Mr. McElya served as President and Chief Executive Officer from the date of the 2004 Acquisition to September 2006. He has been a member of our board of directors since the 2004 Acquisition. He was President, Cooper-Standard Automotive and a corporate Vice President of Cooper Tire & Rubber Company from June 2000 until the 2004 Acquisition. Mr. McElya has over 33 years of automotive experience. He was previously President of Siebe Automotive Worldwide, a division of Invensys, PLC and spent 22 years with Handy & Harman in various executive management positions, including President, Handy & Harman Automotive, and Corporate Vice President of the parent company. Mr. McElya is the past Chairman and current member of the board of directors of the Motor & Equipment Manufacturers Association. He is a past Chairman and current member of the board of directors of the Original Equipment Supplier Association, and he is an advisor to the board of directors of the National Alliance for Accessible Golf. Mr. McElya is a member of the board of directors of Affinia Group.
Edward A. Hasler is our President, a position he has held since May 2010. Mr. Hasler served as President and Chief Executive Officer from July 2008 to March 2009 and as Vice Chairman and President, North America from March 2009 until May 2010. He served as President and Chief Operating Officer from September 2006 to July 2008. Mr. Hasler was President, Global Sealing Systems from the date of the 2004 Acquisition to September 2006. He was the President of the Global Sealing Systems Division and a corporate Vice President of Cooper Tire & Rubber Company from 2003 until the 2004 Acquisition. Mr. Hasler was employed from 2000 to 2001 in Germany as Managing Director,
15
Europe for GDX Corporation. Prior to joining GDX, Mr. Hasler had been with Cooper Tire for nearly 15 years. At Cooper Tire, Mr. Hasler held several senior posts including Vice President, Operations; and Vice President, Controller. He has both an MBA and a BS in Business Administration.
Allen J. Campbell is our Executive Vice President and Chief Financial Officer, a position he has held since March 17, 2011 previously serving as the Vice President and Chief Financial Officer since the 2004 Acquisition. He was Vice President, Asian Operations of the Cooper-Standard Automotive division of Cooper Tire & Rubber Company from 2003 until the 2004 Acquisition and served as Vice President, Finance of the division from 1999 to 2003. Prior to joining Cooper Tire, Mr. Campbell was with The Dow Chemical Company for 18 years and held executive finance positions for both U.S. and Canadian operations. Mr. Campbell is a certified public accountant and received his MBA in Finance from Xavier University.
Keith D. Stephenson is our Chief Operating Officer, a position he has held since December 2010. He served as President, International from March 2009 to December 2010. He served as President, Global Body & Chassis Systems from June 2007 to March 2009. Mr. Stephenson was Chief Development Officer at Boler Company from January 2004 until October 2006. From 1985 to January 2004, he held various senior positions at Hendrickson, a division of Boler Company, including President of International Operations, Senior Vice President of Global Business Operations and President of the Truck Systems Group.
Michael C. Verwilst is our Vice President, Mergers & Acquisitions, a position he has held since March 2009. Previously, Mr. Verwilst served as President, Global Fluid Systems from June 2007 to March 2009. Mr. Verwilst joined the Company in 2003 as the Vice President, Strategic Planning and Business Development. Prior to joining the Company, Mr. Verwilst was a principal with Corporate Improvement Partners from 2001 to 2003. Mr. Verwilst held many executive positions with Federal-Mogul Corporation from 1978 to 2001, including Senior Vice President of Powertrain Systems and Vice President & General Manager of Powertrain SystemsAmericas.
Timothy W. Hefferon is our Vice President, General Counsel and Secretary, a position he has held since the 2004 Acquisition. Prior to joining the Company, Mr. Hefferon was with ThyssenKrupp USA Inc. from 1999 to 2004, where he served as Deputy General Counsel and with Federal-Mogul Corporation from 1994 to 1999, where he served as Associate General Counsel. He was a partner from 1985 to 1994 of Hill Lewis, a Detroit-based law firm, where he served on the executive committee. Mr. Hefferon received his law degree from the University of Michigan Law School.
Kimberly Dickens is our Vice President, Human Resources, a position she has held since March of 2008. Prior to joining the Company, Ms. Dickens served as Vice President, Human Resources at Federal Signal Corporation from 2004 to 2008. Previously, Ms. Dickens held numerous plant and divisional human resource positions at Borg Warner Corporation beginning in 1988, ultimately serving as Vice President, Human Resources from 2002 to 2004. Ms. Dickens has a BS in Industrial Health and Safety from Oakland University and an MBA from Lewis University.
Helen T. Yantz is our Vice President and Corporate Controller, a position she has held since January 2005. Previously, Ms. Yantz held the position of Director of Accounting and Assistant Vice President from 2001 to 2005. Prior to joining the Company, Ms. Yantz was Manager of Financial Reporting at Trinity Health Systems from 2000 to 2001. Previously, Ms. Yantz held various positions in finance at CMS Generations Co., a subsidiary of CMS Energy, from 1990 to 2000, ultimately serving as the Director of Accounting. Ms. Yantz is a certified public accountant and has a BS from Arizona State University.
Forward-Looking Statements
This Annual Report on Form 10-K includes forward-looking statements within the meaning of U.S. federal securities laws, and we intend that such forward-looking statements be subject to the safe harbor created
16
thereby. We make forward-looking statements in this Annual Report on Form 10-K and may make such statements in future filings with the SEC. We may also make forward-looking statements in our press releases or other public or stockholder communications. These forward-looking statements include statements concerning our plans, objectives, goals, strategies, future events, future revenue or performance, capital expenditures, financing needs, plans or intentions relating to acquisitions, business trends, and other information that is not historical information and, in particular, appear under Managements Discussion and Analysis of Financial Condition and Results of Operations, Risk Factors and Business. When used in this report, the words estimates, expects, anticipates, projects, plans, intends, believes, forecasts, or future or conditional verbs, such as will, should, could, or may, and variations of such words or similar expressions are intended to identify forward-looking statements. All forward-looking statements, including, without limitation, managements examination of historical operating trends and data are based upon our current expectations and various assumptions. Our expectations, beliefs, and projections are expressed in good faith and we believe there is a reasonable basis for them. However, no assurances can be made that these expectations, beliefs and projections will be achieved. Forward-looking statements are not guarantees of future performance and are subject to significant risks and uncertainties that may cause actual results or achievements to be materially different from the future results or achievements expressed or implied by the forward-looking statements.
There are a number of risks and uncertainties that could cause our actual results to differ materially from the forward-looking statements contained in this Annual Report on Form 10-K. Important factors that could cause our actual results to differ materially from the forward-looking statements we make in this report are set forth in this Annual Report on Form 10-K, including under Item 1A. Risk Factors. Such risks and uncertainties and other important factors include, but are not limited to:
| cyclicality of the automotive industry and the possibility of further material contractions in automotive sales and production; |
| our ability to generate sufficient cash to service our indebtedness and meet dividend obligations on our 7% preferred stock; |
| viability of our supply base; |
| escalating pricing pressures; |
| our ability to meet a significant increase in demand; |
| our ability to compete in the highly competitive automotive parts industry; |
| our significant non-U.S. operations; |
| our dependence on certain major customers; |
| labor conditions; |
| our ability to meet our customers needs for new and improved products in a timely manner; |
| our legal rights to our intellectual property portfolio; |
| our underfunded pension plans; |
| environmental and other regulation; |
| the possibility that our acquisition strategy will not be successful; |
| the lack of comparability of our financial condition and results of operations following our emergence from bankruptcy to those reflected in our historical financial statements; |
| availability and increasing volatility in cost of raw materials; |
| the possibility of future impairment charges to our goodwill and long-lived assets; and |
| uncertainty as to the effect of our emergence from bankruptcy on our operations going forward. |
17
There may be other factors that may cause our actual results to differ materially from the forward-looking statements. All forward-looking statements attributable to us or persons acting on our behalf apply only as of the date of this Annual Report on Form 10-K and other reports we file with the SEC, and are expressly qualified in their entirety by the cautionary statements included herein and therein. We undertake no obligation to update or revise forward-looking statements to reflect events or circumstances that arise after the date made or to reflect the occurrence of unanticipated events.
Item 1A. | Risk Factors |
Our business and financial condition can be impacted by a number of factors, including the risks described below and elsewhere in this Annual Report on Form 10-K. Any of these risks could cause our actual results to vary materially from recent or anticipated results and could materially and adversely affect our business, results of operations and financial condition.
We are highly dependent on the automotive industry. A prolonged or further material contraction in automotive sales and production volumes could materially adversely affect our liquidity, the viability of our supply base and the financial conditions of our customers and could have a material adverse affect on our business, results of operations and financial condition.
The great majority of our customers are OEMs and their suppliers. In 2009, the automotive industry was severely affected by the turmoil in the global credit markets and the economic recession. These conditions had a dramatic impact on consumer vehicle demand in 2009. During 2009, North American light vehicle industry production declined by approximately 32% from 2008 levels to 8.6 million units. European light vehicle industry production declined by approximately 20% from 2008 levels to 16.3 million units.
Automotive sales and production are highly cyclical and depend, among other things, on general economic conditions and consumer spending and preferences (which can be affected by a number of issues, including fuel costs, employment levels and the availability of consumer financing). As the volume of automotive production fluctuates, the demand for our products also fluctuates. Declines in automotive sales and production in the second half of 2008 and into 2009 lead to our focused efforts, which are ongoing, to restructure our business and take other actions in order to reduce costs. There is no assurance that our actions to date will be sustainable over the long term or will be sufficient if there is further or future decline. In addition, if lower levels of sales and production are forecasted, non-cash impairment charges could result as the value of certain long-lived assets is reduced. As a result, our financial condition and results of operations could be materially adversely affected by further or future declines in vehicle production. Production levels in Europe and North America, most notably, affect us given our concentration of sales in those regions, which accounted for 34% and 52%, respectively, of our 2010 sales.
Our supply base has also been adversely affected by the current industry environment. Lower global automotive production, turmoil in the credit markets and extreme volatility over the past several years in raw material, energy and commodity costs have resulted in financial distress within our supply base and an increase in the risk of supply disruption. In addition, several automotive suppliers have filed for bankruptcy protection or have ceased operations. While we have developed and implemented strategies to mitigate these factors, these strategies have offset only a portion of the adverse impact. The continuation or worsening of these industry conditions could adversely affect our financial condition, operating results and cash flows, thereby making it more difficult for us to make payments under our indebtedness and our 7% preferred stock.
In addition, if our suppliers were to reduce normal trade credit terms, our liquidity could be adversely impacted. Likewise, our liquidity could be adversely impacted if our customers were to extend their normal payment terms, whether or not permitted under our contracts. If either of these situations occurs, we may need to rely on other sources of funding to bridge the additional gap between the time we pay our suppliers and the time we receive corresponding payments from our customers.
18
As a result of the above factors, further or future material contraction in automotive sales and production could have a material adverse effect on our results of operations and liquidity. In addition, our suppliers would also be subject to many of the same consequences, which could adversely impact their results of operations and liquidity. If a suppliers viability was to become impaired, it could impact the suppliers ability to perform as we expect and consequently our ability to meet our own commitments.
The financial conditions of our customers, particularly the Detroit 3, may adversely affect our results of operations and financial condition.
Significantly lower global production levels, tightened liquidity and increased costs of capital have combined to cause severe financial distress among many of our customers and have forced those companies to implement various forms of restructuring actions. In some cases, these actions have involved significant capacity reductions, the discontinuation of entire vehicle brands or even reorganization under bankruptcy laws. Discontinuation of a brand can result in not only a loss of sales associated with any systems or components we supplied but also customer disputes regarding capital we expended to support production of such systems or components for the discontinued brand, and such disputes could potentially be resolved adversely to us.
In North America, Chrysler, Ford and GM have been engaged in unprecedented restructuring, which included, in the case of Chrysler and GM, reorganization under bankruptcy laws and subsequent asset sales. While portions of Chrysler and GM have successfully emerged from bankruptcy proceedings in the United States, it is still uncertain what portion of their respective sales will return and whether they can be viable at a lower level of sales.
Our capital structure includes a substantial amount of indebtedness and preferred stock, which impose demands on our liquidity that could have a material adverse effect on our financial condition or on our ability to obtain financing in the future.
We have a substantial amount of debt outstanding, including our Senior Notes and the debt of certain foreign subsidiaries aggregating approximately $476.7 million that requires significant principal and interest payments, and preferred stock outstanding that may require significant preferred dividend payments. We are permitted by the terms of the Senior Notes and ABL facility to incur substantial additional indebtedness, subject to the restrictions therein, which could:
| make it more difficult for us to satisfy our obligations under the Senior Notes, the ABL facility and preferred stock; |
| increase our vulnerability to adverse economic and general industry conditions, including interest rate fluctuations, since a portion of our borrowings are at variable rates of interest; |
| require us to dedicate a substantial portion of our cash flow from operations to principal and interest payments on our debt and, if we so elect, cash dividend payments on our preferred stock, which would reduce the availability of our cash flow from operations to service additional debt or to fund working capital, capital expenditures or other general corporate purposes; and; |
| increase our cost of borrowing. |
We may not be able to generate sufficient cash to service all of our indebtedness and to meet any dividend obligations of our preferred stock.
Our ability to make scheduled payments on our debt and meet the potential cash dividend obligations of our preferred stock or to refinance these obligations depends on our financial condition and operating performance. If our cash flows and capital resources are insufficient to fund our debt service obligations and any cash dividend obligations on our preferred stock, we may be forced to reduce or delay investments and capital expenditures, sell material assets, seek additional capital or restructure or refinance our indebtedness or the preferred stock, which could have a material adverse effect on our business, financial condition and results of operations.
19
We could be adversely affected by any shortage of supplies.
In the event of a rapid increase in production demands, either we or our customers or other suppliers may experience supply shortages of raw materials or components. This could be caused by a number of factors, including a lack of production line capacity or manpower or working capital constraints. In order to manage and reduce the cost of purchased goods and services, we and others within our industry have been rationalizing and consolidating our supply base. In addition, due to the turbulence in the automotive industry, several suppliers have initiated bankruptcy proceedings or ceased operations. As a result, there is greater dependence on fewer sources of supply for certain components and materials, which could increase the possibility of a supply shortage of any particular component. If any of our customers experience a material supply shortage, either directly or as a result of a supply shortage at another supplier, that customer may halt or limit the purchase of our products. Similarly, if we or one of our own suppliers experience a supply shortage, we may become unable to produce the affected products if we cannot procure the components from another source. Such production interruptions could impede a ramp-up in vehicle production and could have a material adverse effect on our business, results of operations and financial condition.
Escalating pricing pressures from our customers may adversely affect our business.
Pricing pressure in the automotive supply industry has been substantial and is likely to continue. Virtually all vehicle manufacturers seek price reductions in both the initial bidding process and during the term of the contract. Price reductions have impacted our sales and profit margins and are expected to do so in the future. If we are not able to offset continued price reductions through improved operating efficiencies and reduced expenditures, those price reductions may have a material adverse effect on our results of operations.
We may be at risk of not being able to meet significant increases in demand.
If demand increases significantly from what has been a historical low for production over the last two years, we may have difficulty meeting such demand, particularly if such increases in demand occurs rapidly. This difficulty may include not having sufficient manpower or relying on suppliers who may not be able to respond quickly to a changed environment when demand significantly increases. Our inability to meet significant increases in demand could require us to delay delivery dates and could result in customers cancelling their orders, requesting discounts or ceasing to do business with us. In addition, as demand and volumes increase, we will need to purchase more inventory, which will increase our working capital needs. If our working capital needs exceed our cash flows from operations, we will be required to use our cash balances and available borrowings, as well as potential sources of additional capital, which may not be available on satisfactory terms and in adequate amounts, if at all, to satisfy those needs.
Increasing costs for, or reduced availability of, manufactured components and raw materials may adversely affect our profitability.
The principal raw materials we purchase include fabricated metal-based components, synthetic rubber, carbon black, natural rubber, process oil and plastic components. Raw materials comprise the largest component of our costs, representing approximately 49% of our total costs in 2010. A significant increase in the price of these items could materially increase our operating costs and materially and adversely affect our profit margins because it is generally difficult to pass through these increased costs to our customers. Raw material costs remain volatile and could have an adverse impact on our profitability in the foreseeable future.
Because we purchase various types of raw materials and manufactured components, we may be materially and adversely affected by the failure of our suppliers of those materials to perform as expected. This non-performance may consist of delivery delays or failures caused by production issues or delivery of non-conforming products. The risk of non-performance may also result from the insolvency or bankruptcy of one or more of our suppliers. Our suppliers ability to supply products to us is also subject to a number of risks to
20
such suppliers, including availability of raw materials, such as steel and natural rubber, destruction of their facilities or work stoppages. In addition, our failure to promptly pay, or order sufficient quantities of inventory from our suppliers may increase the cost of products we purchase or may lead to suppliers refusing to sell products to us at all. Our efforts to protect against and to minimize these risks may not always be effective.
We consider the production capacities and financial condition of suppliers in our selection process and expect that they will meet our delivery requirements. However, there can be no assurance that strong demand, capacity limitations, shortages of raw materials or other problems will not result in any shortages or delays in the supply of components to us.
We could be materially adversely affected if we are unable to continue to compete successfully in the highly competitive automotive parts industry.
The automotive parts industry is highly competitive. We face numerous competitors in each of the product lines we serve. In general, there are three or more significant competitors and numerous smaller competitors for most of the products we offer. We also face increased competition for certain of our products from suppliers producing in lower-cost countries such as Korea and China, especially for certain lower-technology noise, vibration and harshness control products that have physical characteristics that make long-distance shipping more feasible and economical. We may not be able to continue to compete favorably, and increased competition in our markets may have a material adverse effect on our business.
We are subject to other risks associated with our non-U.S. operations.
We have significant manufacturing operations outside the United States, including joint ventures and other alliances. Our operations are located in 18 countries, and we export to several other countries. In 2010, approximately 73% of our sales were attributable to products manufactured outside the United States. Risks are inherent in international operations, including:
| exchange controls and currency restrictions; |
| currency fluctuations and devaluations; |
| changes in local economic conditions; |
| repatriation restrictions (including the imposition or increase of withholding and other taxes on remittances and other payments by foreign subsidiaries); |
| hyperinflation in certain foreign countries; |
| changes in laws and regulations, including the imposition of embargos; |
| exposure to possible expropriation or other government actions; and |
| exposure to local political or social unrest including resultant acts of war, terrorism or similar events. |
These and other factors may have a material adverse effect on our international operations or on our business, results of operations and financial condition. For example, we are faced with potential difficulties in staffing and managing local operations and we have to design local solutions to manage credit risks of local customers and distributors. Also, the cost and complexity of streamlining operations in certain European countries is greater than would be the case in the United States, due primarily to labor laws in those countries that can make reducing employment levels more time-consuming and expensive than in the United States. Our flexibility in our foreign operations can also be somewhat limited by agreements we have entered into with our foreign joint venture partners.
Our overall success as a global business depends, in part, upon our ability to succeed in differing economic, social and political conditions. We may not continue to succeed in developing and implementing policies and strategies that are effective in each location where we do business, and failure to do so could harm our business, results of operations and financial condition.
21
Our sales outside the United States expose us to currency risks. During times of a strengthening U.S. dollar, at a constant level of business, our reported international sales and earnings will be reduced because the local currency will translate into fewer U.S. dollars. In addition to currency translation risks, we incur a currency transaction risk whenever one of our operating subsidiaries enters into either a purchase or a sales transaction using a different currency from the currency in which it receives revenues. Given the volatility of exchange rates, we may not be able to manage our currency transaction and translation risks effectively, or volatility in currency exchange rates may have a material adverse effect on our financial condition or results of operations.
We conduct significant operations in Mexico, which could be materially and adversely affected as a result of the increased levels of violence and political disruption.
Recently, drug related violence has risen to unprecedented levels along the U.S.-Mexico border despite increased law-enforcement efforts by the Mexican and the U.S. governments. This situation presents several risks to our operations in Mexico, including, among others, that our employees may be directly affected by the violence, that our employees may elect to relocate out of the region in order to avoid the risk of violent crime to themselves or their families and that our customers may become increasingly reluctant to visit our Mexican facilities, which could delay new business opportunities and other important aspects of our business. If any of these risks materializes, our business may be materially and adversely affected.
Our lean manufacturing and other cost savings plans may not be effective.
Our operations strategy includes cutting costs by reducing production errors, inventory levels, operator motion, overproduction and waiting while fostering the increased flow of material, information and communication. The cost savings that we anticipate from these initiatives may not be achieved on schedule or at the level anticipated by management. If we are unable to realize these anticipated savings, our operating results and financial condition may be materially adversely affected. Moreover, the implementation of cost saving plans and facilities integration may disrupt our operations and performance.
Our business could be materially adversely affected if we lost any of our largest customers.
While we provide parts to virtually every major global OEM for use on a multitude of different platforms, sales to our three largest customers, Ford, GM and Fiat, on a worldwide basis represented approximately 51% of our sales. Although business with each customer is typically split among numerous contracts, if we lost a major customer or that customer significantly reduced its purchases of our products whether as a result of a decline in such customers market share due to increased competition from Asian or other OEMs successful vertical integration at the customer level, or otherwise, there could be a material adverse affect on our business, results of operations and financial condition.
We may incur material losses and costs as a result of product liability and warranty and recall claims that may be brought against us.
We may be exposed to product liability and warranty claims in the event that our products actually or allegedly fail to perform as expected or the use of our products results, or is alleged to result, in bodily injury and/or property damage. Accordingly, we could experience material warranty or product liability losses in the future and incur significant costs to defend against these claims. In addition, if any of our products are, or are alleged to be, defective, we may be required to participate in a recall of that product if the defect or the alleged defect relates to automotive safety. As suppliers become more integrally involved in the vehicle design process and assume more of the vehicle assembly functions, customers are increasingly seeking to change contract terms and conditions concerning warranty and recall participation. Also, while we possess considerable historical warranty and recall data with respect to the products we currently produce, we do not have such data relating to new products, assembly programs or technologies, including any new fuel and emissions technology and systems being brought into production to allow us to accurately estimate future warranty or recall costs. In addition, the
22
increased focus on systems integration platforms utilizing fuel and emissions technology with more sophisticated components from multiple sources could result in an increased risk of component warranty costs over which we have little or no control and for which we may be subject to an increasing share of liability to the extent any of the other component suppliers are in financial distress or are otherwise incapable of fulfilling their warranty or product recall obligations. Our costs associated with providing product warranties and responding to product recall claims could be material and we do not have insurance covering product recalls. Product liability, warranty and recall costs may have a material adverse effect on our business, results of operations and financial condition.
Work stoppages or similar difficulties could disrupt our operations.
We may be subject to work stoppages and may be affected by other labor disputes. A number of our collective bargaining agreements expire in any given year including several in 2011. There is no certainty that we will be successful in negotiating new agreements with these unions that extend beyond the current expiration dates, or that these new agreements will be on terms as favorable to us as past labor agreements. Failure to renew these agreements when they expire or to establish new collective bargaining agreements on terms acceptable to us and the unions could result in work stoppages or other labor disruptions which may have a material adverse effect on customer relationships and our business and results of operations. Additionally, a work stoppage at one or more of our suppliers, our customers or our customers suppliers could materially adversely affect our operations if an alternative source of supply were not readily available. Work stoppages by employees of our customers also could result in reduced demand for our products and could have a material adverse effect on our business. As of December 31, 2010, approximately 31% of our employees were represented by unions, approximately 14% of which were located in the United States. It is possible that our workforce will become more unionized in the future. A work stoppage at one or more of our plants may have a material adverse effect on our business. Unionization activities could also increase our costs, which could have a material adverse effect on our profitability.
Our success depends in part on our development of improved products, and our efforts may fail to meet the needs of customers on a timely or cost-effective basis.
Our continued success depends on our ability to maintain advanced technological capabilities, machinery and knowledge necessary to adapt to changing market demands as well as to develop and commercialize innovative products. We may be unable to develop new products as successfully as in the past or to keep pace with technological developments by our competitors and the industry generally. In addition, we may develop specific technologies and capabilities in anticipation of customers demands for new innovations and technologies. If such demand does not materialize, we may be unable to recover the costs incurred in such programs. If we are unable to recover these costs or if any such programs do not progress as expected, our business, financial condition and results of operations could be materially adversely affected.
Our intellectual property portfolio is subject to legal challenges and considerable uncertainty.
We have developed and actively pursue the development of proprietary technology in the automotive industry and rely on intellectual property laws and a number of patents in many jurisdictions to protect such technology. There can be no assurances that the protections we have available for our proprietary technology in the United States and other countries will be available to us in many places we sell our products. Therefore, we may be unable to prevent third parties from using our intellectual property without authorization. If we had to litigate to protect these rights, any proceedings could be costly, and we may not prevail. We also face increasing exposure to the claims of others for infringement of intellectual property rights. We may have material intellectual property claims asserted against us in the future and could incur significant costs or losses related to such claims. In addition, any infringement or misappropriation of our technology that we cannot control could have a material negative impact on our business and results of operations. These claims, regardless of their merit or resolution, are frequently costly to prosecute, defend or settle and divert the efforts and attention of our management and employees. Claims of this sort also could harm our relationships with our customers and might
23
deter future customers from doing business with us If any such claim were to result in an adverse outcome, we could be required to take actions which may include: cease the manufacture, use or sale of the infringing products; pay substantial damages to third parties, including to customers to compensate them for their discontinued use or replace infringing technology with non-infringing technology; or expend significant resources to develop or license non-infringing products.
Our pension plans are currently underfunded and we may have to make cash payments to the plans, reducing the cash available for our business.
We sponsor various pension plans worldwide that are underfunded and will require cash payments. Additionally, if the performance of the assets in our pension plans does not meet our expectations, or if other actuarial assumptions are modified, our required contributions may be higher than we expect. If our cash flow from operations is insufficient to fund our worldwide pension liability, we may be forced to reduce or delay capital expenditures, seek additional capital or seek to restructure or refinance our indebtedness or sell assets.
As of December 31, 2010, our $286.1 million projected benefit obligation, or PBO, for U.S. pension benefit obligations exceeded the fair value of the relevant plans assets, which totaled $196.0 million, by $90.1 million. Additionally, the international employees plans PBO exceeded plan assets by approximately $76.0 million as of December 31, 2010. The PBO for other postretirement benefits, or OPEB, was $75.0 million as of December 31, 2010. Our estimated funding requirement for pensions and OPEB during 2011 is approximately $35.2 million. Net periodic benefit costs for U.S. and international plans, including pension benefits and OPEB, were $14.4 million, $6.1 million and $5.2 million for the year ended December 31, 2009, the five months ended May 31, 2010 and the seven months ended December 31, 2010, respectively. For more information, see notes 9 and 10 to the audited consolidated financial statements.
Significant changes in discount rates, the actual return on pension assets and other factors could adversely affect our liquidity, financial condition and results of operations.
Our earnings may be positively or negatively impacted by the amount of income or expense recorded related to our qualified pension plans. Accounting principles generally accepted in the United States (GAAP) require that income or expense related to the pension plans be calculated at the annual measurement date using actuarial calculations, which reflect certain assumptions. The most significant of these assumptions relate to interest rates, the capital markets and other economic conditions. Changes in key economic indicators can change these assumptions. These assumptions, as well as the actual value of pension assets at the measurement date, will impact the calculation of pension expense for the year. Although GAAP expense and pension contributions are not directly related, the key economic indicators that affect GAAP expense also affect the amount of cash that we will contribute to our pension plans. Because the values of these pension assets have fluctuated and will continue to fluctuate in response to changing market conditions, the amount of gains or losses that will be recognized in subsequent periods, the impact on the funded status of the pension plans and the future minimum required contributions, if any, could adversely affect our liquidity, financial condition and results of operations.
We are subject to a broad range of environmental, health and safety laws and regulations, which could adversely affect our business and results of operations.
We are subject to a broad range of federal, state and local environmental and occupational safety and health laws and regulations in the United States and other countries, including those governing: emissions to air; discharges to water; noise and odor emissions; the generation, handling, storage, transportation, treatment and disposal of waste materials; the cleanup of contaminated properties; and human health and safety. We may incur substantial costs associated with hazardous substance contamination or exposure, including cleanup costs, fines and civil or criminal sanctions, third party property or natural resource damage, personal injury claims or costs to upgrade or replace existing equipment as a result of violations of or liabilities under environmental laws or the failure to maintain or comply with environmental permits required at our locations. In addition, many of our
24
current and former facilities are located on properties with long histories of industrial or commercial operations and some of these properties have been subject to certain environmental investigations and remediation activities. We maintain environmental reserves for certain of these sites, which we believe are adequate. Because some environmental laws (such as the Comprehensive Environmental Response, Compensation and Liability Act and analogous state laws) can impose liability retroactively and regardless of fault on potentially responsible parties for the entire cost of cleanup at currently or formerly owned and operated facilities, as well as sites at which such parties disposed or arranged for disposal of hazardous waste, we could become liable for investigating or remediating contamination at our current or former properties or other properties (including offsite waste disposal locations). We may not always be in complete compliance with all applicable requirements of environmental law or regulation, and we may receive notices of violation or become subject to enforcement actions or incur material costs or liabilities in connection with such requirements. In addition, new environmental requirements or changes to interpretations of existing requirements, or in their enforcement, could have a material adverse effect on our business, results of operations and financial condition. For example, while we are not large emitters of greenhouse gases, laws, regulations and certain regional initiatives under consideration by the U.S. Congress, the U.S. Environmental Protection Agency and various states, and in effect in certain foreign jurisdictions, could result in increased operating costs to control and monitor such emissions. We have made and will continue to make expenditures to comply with environmental requirements. While our costs to defend and settle claims arising under environmental laws in the past have not been material, such costs may be material in the future.
If our acquisition strategy is not successful, we may not achieve our growth and profit objectives.
We may selectively pursue complementary acquisitions in the future as part of our growth strategy. While we will evaluate business opportunities on a regular basis, we may not be successful in identifying any attractive acquisitions. We may not have, or be able to raise on acceptable terms, sufficient financial resources to make acquisitions. Our ability to make investments may also be limited by the terms of our existing or future financing arrangements. In addition, any acquisitions we make will be subject to all of the risks inherent in an acquisition strategy, including integrating financial and operational reporting systems, establishing satisfactory budgetary and other financial controls, funding increased capital needs and overhead expenses, obtaining management personnel required for expanded operations and funding cash flow shortages that may occur if anticipated sales are not realized or are delayed, whether by general economic or market conditions or unforeseen internal difficulties.
Because of our adoption of fresh-start accounting and the effects of the transactions contemplated by our Plan of Reorganization, financial information subsequent to May 31, 2010 will not be comparable to financial information prior to May 31, 2010.
Upon our emergence from Chapter 11 bankruptcy proceedings, we adopted fresh-start accounting in accordance with the provisions of Accounting Standards Codification (ASC) 852, pursuant to which our reorganization value was allocated to our assets in conformity with the procedures specified by ASC 805, Business Combinations. The excess of reorganization value over the fair value of tangible and identifiable intangible assets was recorded as goodwill, which is subject to periodic evaluation for impairment. Liabilities, other than deferred taxes, were recorded at the present value of amounts expected to be paid. In addition, under fresh-start accounting, common stock, retained deficit and accumulated other comprehensive loss were eliminated. Our consolidated financial statements also reflect all of the transactions contemplated by our Plan of Reorganization. Accordingly, our consolidated financial statements subsequent to May 31, 2010, will not be comparable in many respects to our consolidated financial statements prior to May 31, 2010. The lack of comparable historical financial information may discourage investors from purchasing our capital stock.
25
Our emergence from bankruptcy reduced or eliminated our U.S. net operating losses and other tax attributes and limits our ability to offset future U.S. taxable income with tax losses and credits incurred prior to our emergence from bankruptcy.
The discharge of a debt obligation by a taxpayer in a bankruptcy proceeding for an amount less than its adjusted issue price (as defined for tax purposes) generally creates cancellation of indebtedness income ( COD income), that is excludable from a taxpayers taxable income. However certain tax attributes otherwise available and of value to a debtor will be reduced to the extent of the excludable COD income. Additionally, Internal Revenue Code Sections 382 and 383 provide an annual limitation with respect to the ability of a corporation to utilize its tax attributes, as well as certain built-in-losses, against future U.S. taxable income in the event of a change in ownership. As a result of our emergence from bankruptcy we have had significant excludable COD income that will reduce or eliminate our U.S. net operating losses and other tax attributes and we have had an ownership change and a resulting limitation under Internal Revenue Code Sections 382 and 383.
Impairment charges relating to our goodwill and long-lived assets could adversely affect our results of operations.
We regularly monitor our goodwill and long-lived assets for impairment indicators. In conducting our goodwill impairment testing, we compare the fair value of each of our reporting units to the related net book value. In conducting our impairment analysis of long-lived assets, we compare the undiscounted cash flows expected to be generated from the long-lived assets to the related net book values. Changes in economic or operating conditions impacting our estimates and assumptions could result in the impairment of our goodwill or long-lived assets. In the event that we determine that our goodwill or long-lived assets are impaired, we may be required to record a significant charge to earnings, which could adversely affect our results of operations.
We cannot be certain that our emergence from bankruptcy will not adversely affect our operations going forward.
Although we emerged from bankruptcy on May 27, 2010, we cannot assure you that having been subject to bankruptcy protection will not adversely affect our operations going forward, including our ability to negotiate favorable terms from suppliers, hedging counterparties and others and to attract and retain customers. The failure to obtain such favorable terms and retain customers could materially adversely affect our financial performance.
Certain shareholders with nomination agreements nominated a majority of the board of directors and their interests in the Company may conflict with your interests.
In accordance with our Plan of Reorganization and the Equity Commitment Agreement, our board of directors is comprised of seven directors, one of whom is our chief executive officer and two who are independent directors from our pre-emergence board of directors selected by us. Each of Barclays Capital Inc., and the group of parties comprised of Capital Research and Management Company, Lord, Abbett & Co. LLC, TCW Asset Management Company and TD Asset Management Inc. nominated one non-management member of our board of directors in reasonable consultation with (but without the need for the approval of) our chief executive officer and an executive search firm, Korn/Ferry International, mutually acceptable to such parties and us. With respect to the non-management members nominated as described above, such nominations were made in consultation with the creditors committee appointed in the Chapter 11 cases, solely to determine whether such nominee had a prior relationship with any party that provided for the backstop of our rights offering conducted pursuant to the Plan of Reorganization (Backstop Party) that would reasonably be expected to influence the exercise of his or her business judgment. Oak Hill Advisors, L.P. nominated one member of our board of directors and Silver Point Capital, L.P. nominated one member. Barclays Capital Inc. was also an initial purchaser of the outstanding notes.
The Backstop Parties will have the right to nominate members to our board of directors until the earlier of (i) termination of the applicable Nomination Agreement (as defined below) at the election of the applicable
26
Backstop Party by written notice to us, (ii) immediately prior to the annual meeting of stockholders held during the calendar year 2013 and (iii) if the applicable Backstop Party together with its affiliates ceases to beneficially own at least 7.5% of our outstanding equity (on an as converted basis).
As long as the Backstop Parties (whether or not acting in a coordinated manner) and any other substantial stockholder own, directly or indirectly, a substantial portion of our outstanding shares, they will be able to exert significant influence over us, including:
| the composition of our board of directors and, through it, any determination with respect to our business; |
| direction and policies, including the appointment and removal of officers; |
| the determination of incentive compensation, which may affect our ability to retain key employees; |
| any determinations with respect to mergers or other business combinations; |
| our acquisition or disposition of assets; |
| our financing decisions and our capital raising activities; |
| the payment of dividends; |
| conduct in regulatory and legal proceedings; and |
| amendments to our certificate of incorporation. |
The concentration of ownership of our outstanding equity in the Backstop Parties may make some transactions more difficult or impossible without the support of the Backstop Parties or more likely with the support of the Backstop Parties. The interests of any of the Backstop Parties, any other substantial stockholder or any of their respective affiliates could conflict with or differ from our interests or the interests of holders of the Senior Notes. For example, the concentration of ownership held by the Backstop Parties could delay, defer or prevent a change of control of our company or impede a merger, takeover or other business combination which may otherwise be favorable for us. A Backstop Party, substantial stockholder or affiliate thereof may also pursue acquisition opportunities that may be complementary to our business, and as a result, those acquisition opportunities may not be available to us.
The indenture governing the Senior Notes and the credit agreement governing our Senior ABL Facility impose significant operating and financial restrictions on us and our subsidiaries, which may prevent us from capitalizing on business opportunities.
The indenture governing the Senior Notes and the credit agreement governing our Senior ABL Facility impose significant operating and financial restrictions on us. These restrictions limit our ability, among other things, to:
| incur additional indebtedness or issue certain disqualified stock and preferred stock; |
| pay dividends or certain other distributions on our capital stock or repurchase our capital stock; |
| make certain investments or other restricted payments; |
| place restrictions on the ability of our restricted subsidiaries to pay dividends or make other payments to us; |
| engage in transactions with affiliates; |
| sell certain assets or merge with or into other companies; |
| guarantee indebtedness; and |
| create liens. |
27
There are limitations on our ability to incur the full $125.0 million of commitments under our Senior ABL Facility. Borrowings under our Senior ABL Facility are limited by a specified borrowing base consisting of a percentage of eligible accounts receivable and eligible inventory, less customary reserves imposed by the agent under our Senior ABL Facility. In addition, under our Senior ABL Facility, a monthly fixed charge maintenance covenant would become applicable if excess availability under our Senior ABL Facility is at any time less than a specified percentage (or amount) of the total revolving loan commitments. If the covenant trigger were to occur, Cooper-Standard Holdings Inc. would be required to satisfy and maintain, on a consolidated basis, on the last day of each month a fixed charge coverage ratio of at least 1.1 to 1.0. Our ability to meet the required fixed charge coverage ratio can be affected by events beyond our control, and we cannot assure that we will meet this ratio. A breach of any of these covenants could result in a default under our Senior ABL Facility.
Moreover, our Senior ABL Facility provides the lenders considerable discretion to impose reserves, which could materially reduce the amount of borrowings that would otherwise be available to us. There can be no assurance that the lenders under our Senior ABL Facility will not impose such reserves during the term of our Senior ABL Facility and further, were they to do so, the resulting impact of this action could materially and adversely impair our ability to make interest payments on the Senior Notes. Also, when (and for as long as) the availability under our Senior ABL Facility is less than a specified amount for a certain period of time, the agent under our Senior ABL Facility would exercise cash dominion.
As a result of these covenants and restrictions, we are limited in how we conduct our business and we may be unable to raise additional debt or equity financing to compete effectively or to take advantage of new business opportunities. The terms of any future indebtedness we may incur could include more restrictive covenants. We cannot assure that we will be able to maintain compliance with these covenants in the future and, if we fail to do so, that we will be able to obtain waivers from the lenders and/or amend the covenants.
Item 1B. | Unresolved Staff Comments. |
Not applicable.
Item 2. | Properties |
As of December 31, 2010, our operations were conducted through 75 facilities in 18 countries, of which 66 are manufacturing facilities and nine are used for multiple purposes, including design, engineering and administration. Our corporate headquarters is located in Novi, Michigan. Our manufacturing facilities are located in North America, Europe, Asia, South America and Australia. We believe that substantially all of our properties are in good condition and that we have sufficient capacity to meet our current and projected manufacturing and design needs. The following table summarizes our key property holdings by geographic region:
Region |
Type |
Total Facilities |
Owned Facilities |
|||||||
North America |
Manufacturing(a) Other(b) |
|
29 3 |
|
|
23 |
| |||
Asia |
Manufacturing Other(b) |
|
15 2 |
|
|
7 |
| |||
Europe |
Manufacturing Other(b) |
|
19 3 |
|
|
15 |
| |||
South America |
Manufacturing Other(b) |
|
2 1 |
|
|
1 |
| |||
Australia |
Manufacturing | 1 | 1 |
(a) | Includes NISCO joint venture operations. |
(b) | Includes design, engineering or administrative locations. |
28
Our principal owned and leased properties, and the number of facilities in each location with more than one facility are set forth below.
Location |
Principal Products |
Owned/Leased | ||
North America |
||||
United States |
||||
Auburn, Indiana |
Anti-Vibration Systems | Owned | ||
Auburn Hills, Michigan(a) |
Design, engineering and administration | Leased | ||
Bowling Green, Ohio(2) |
Body Sealing and Fluid Handling | Owned | ||
Bremen, Indiana(b) |
Body Sealing | Owned | ||
East Tawas, Michigan |
Fluid Handling | Owned | ||
Fairview, Michigan |
Fluid Handling | Owned | ||
Farmington Hills, Michigan(a) |
Design, engineering and administration | Leased | ||
Gaylord, Michigan |
Body Sealing | Owned | ||
Goldsboro, North Carolina(2) |
Body Sealing | Owned | ||
Leonard, Michigan |
Fluid Handling | Owned | ||
Mt. Sterling, Kentucky |
Fluid Handling | Owned | ||
New Lexington, Ohio |
Fluid Handling | Owned | ||
Novi, Michigan(a) |
Design, engineering and administration | Leased | ||
Oscoda, Michigan |
Fluid Handling | Owned | ||
Spartanburg, South Carolina |
Body Sealing | Owned | ||
Surgoinsville, Tennessee |
Fluid Handling | Leased | ||
Topeka, Indiana(b) |
Body Sealing | Owned | ||
Canada |
||||
Georgetown, Ontario |
Body Sealing | Owned | ||
Glencoe, Ontario |
Fluid Handling | Owned | ||
Mitchell, Ontario |
Anti-Vibration Systems | Owned | ||
Stratford, Ontario(3) |
Body Sealing | Owned | ||
Mexico |
||||
Aguacalientes |
Body Sealing | Leased | ||
Atlacomulco |
Fluid Handling | Owned | ||
Guaymas |
Fluid Handling | Leased | ||
Juarez |
Fluid Handling | Owned | ||
Saltillo |
Fluid Handling | Leased | ||
Torreon(2) |
Fluid Handling | Owned | ||
South America |
||||
Brazil |
||||
Camaçari |
Fluid Handling | Leased | ||
Sao Bernardo(a) |
Sales & Administration | Leased | ||
Varginha |
Body Sealing and Fluid Handling | Owned | ||
Europe |
||||
Belgium |
||||
Gent |
Body Sealing | Leased | ||
Czech Republic |
||||
Zdar |
Fluid Handling | Owned | ||
France |
||||
Argenteuil(a) |
Design, engineering and administration | Leased | ||
Baclair |
Body Sealing | Leased | ||
Creutzwald |
Fluid Handling | Owned | ||
Lillebonne |
Body Sealing | Owned | ||
Vitré |
Body Sealing | Owned |
29
Location |
Principal Products |
Owned/Leased | ||
Germany |
||||
Grünberg |
Fluid Handling | Leased | ||
Hockenheim |
Fluid Handling | Owned | ||
Lindau |
Body Sealing | Owned | ||
Mannheim |
Body Sealing | Owned | ||
Schelklingen |
Fluid Handling | Owned | ||
Italy |
||||
Battipaglia |
Body Sealing | Owned | ||
Ciriè |
Body Sealing | Owned | ||
Netherlands |
||||
Amsterdam(a) |
Administration | Leased | ||
Poland |
||||
Bielsko-Biala |
Body Sealing | Owned | ||
Dzierzoniow(2) |
Body Sealing | Owned | ||
Myslenice |
Body Sealing | Leased | ||
Piotrkow |
Body Sealing | Owned | ||
Spain |
||||
Getafe(c) |
Fluid Handling | Owned | ||
United Kingdom |
||||
Coventry(a) |
Design, engineering and administration | Leased | ||
Asia Pacific |
||||
Australia |
||||
Adelaide |
Fluid Handling | Owned | ||
China |
||||
Changchun(b) |
Fluid Handling | Leased | ||
Chongqing |
Fluid Handling | Owned | ||
Huai-an(b) |
Body Sealing | Leased | ||
Jingzhou(b) |
Fluid Handling | Owned | ||
Kunshan |
Anti-Vibration, Body Sealing and Fluid Handling | Owned | ||
Panyu(b) |
Body Sealing | Leased | ||
Shanghai(b) |
Body Sealing | Owned | ||
Wuhu |
Body Sealing | Owned | ||
India |
||||
Chennai |
Fluid Handling | Leased | ||
Dharuhera(b) |
Body Sealing | Leased | ||
Sahibabad(b) |
Body Sealing | Leased | ||
Manesar(b) |
Body Sealing | Leased | ||
Pune |
Fluid Handling | Leased | ||
Japan |
||||
Hiroshima(a) |
Design, engineering and administration | Leased | ||
Nagoya(a) |
Design, engineering and administration | Leased | ||
Korea |
||||
Cheong-Ju |
Body Sealing | Owned | ||
Seo-Cheon Gun |
Body Sealing & Fluid Handling | Owned |
(a) | Denotes non-manufacturing locations, including design, engineering or administrative locations. |
(b) | Denotes a joint venture facility. |
(c) | Denotes a location closed in 2010. |
30
Item 3. | Legal Proceedings |
We are periodically involved in claims, litigation and various legal matters that arise in the ordinary course of business. In addition, we conduct and monitor environmental investigations and remedial actions at certain locations. Each of these matters is subject to various uncertainties, and some of these matters may be resolved unfavorably for us. If appropriate we establish a reserve estimate for each matter and update our estimate as additional information becomes available. We do not believe that the ultimate resolution of any of these matters will have a material adverse effect on our business, financial condition or results of operations.
On August 3, 2009, the Debtors filed a voluntary petition for relief in the Bankruptcy Court to reorganize under Chapter 11 of the Bankruptcy Code. The Debtors continued to operate their businesses and owned and managed their properties as a debtor-in-possession under the jurisdiction of the Bankruptcy Court in accordance with the applicable provisions of the Bankruptcy Code until the Debtors emerged from protection under Chapter 11 of the Bankruptcy Code on May 27, 2010. See Note 3. Reorganization Under Chapter 11 of the Bankruptcy Code to the consolidated financial statements.
Item 4. | Reserved |
31
Item 5. | Market for Registrants Common Equity, Related Stockholder Matters, and Issuer Purchases of Equity Securities |
Market Information
Our common stock has been quoted on the OTC Bulletin Board since May 27, 2010 under the symbol COSH.OB and our warrants have been quoted on the OTC Bulletin Board since June 4, 2010 under the symbol COSHW.OB. No prior established public trading market existed for our common stock or warrants prior to these dates.
There currently is a limited trading market for our common stock and warrants. The following chart lists the high and low sale prices for shares of our common stock and warrants for the calendar quarters indicated through December 31, 2010. These prices are between dealers and do not include retail markups, markdowns or other fees and commissions and may not represent actual transactions:
Common Stock | Cash Dividend Per share |
Warrants | ||||||||||||||||||
Quarter Ended |
High | Low | High | Low | ||||||||||||||||
June 30, 2010 |
$ | 35.75 | $ | 31.50 | $ | | $ | 17.00 | $ | 14.00 | ||||||||||
September 30, 2010 |
$ | 37.00 | $ | 27.45 | $ | | $ | 20.00 | $ | 13.00 | ||||||||||
December 31, 2010 |
$ | 49.55 | $ | 36.00 | $ | | $ | 28.00 | $ | 15.00 |
The closing price of our common stock on the OTC Bulletin Board on December 31, 2010 was $45.00 per share and the closing price of our warrants on the OTC Bulletin Board on December 31, 2010 was $26.00 per warrant.
Holders of Common Stock
As of the date hereof, an aggregate of 7,774,519 shares of our common stock may be purchased upon the exercise of outstanding options, issued upon the exercise of our outstanding warrants and issued upon the conversion of our outstanding shares of 7% preferred stock.
As of January 27, 2011 we had approximately 475 holders of record of our common stock, based on information provided by our transfer agent.
Dividends
Cooper-Standard Holdings Inc. has never paid or declared a dividend on its common stock. The declaration of any prospective dividends is at the discretion of the Board of Directors and would be dependent upon sufficient earnings, capital requirements, financial position, general economic conditions, state law requirements, and other relevant factors. Additionally, our credit agreement governing our Senior ABL Facility and the Senior Notes indenture contain covenants that among other things restrict our ability to pay certain dividends and distributions subject to certain qualifications and limitations. We do not anticipate paying any dividends on our common stock in the forseeable future.
Performance Graph
The following graph compares the cumulative total stockholder return from May 27, 2010, the date of our emergence from Chapter 11 bankruptcy proceedings, through December 31, 2010, for Cooper-Standard Holdings Inc. existing common stock, the Standard & Poors 500 Index and the Standard & Poors Supercomposite Auto
32
Parts & Equipment Index based on currently available data. The graph assumes an initial investment of $100 on May 27, 2010 and reflects the cumulative total return on that investment, including the reinvestment of all dividends where applicable, through December 31, 2010.
Comparison of Cumulative Return
Ticker | 5/27/2010 | 12/31/2010 | ||||||||
Cooper-Standard Holdings Inc. |
COSH.OB | $ | 100.00 | $ | 130.43 | |||||
S&P 500 |
SPX | $ | 100.00 | $ | 115.24 | |||||
S&P Supercomposite Auto Parts & Equipment Index |
S15AUTP | $ | 100.00 | $ | 142.48 |
Item 6. | Selected Financial Data |
The selected financial data for the years ended December 31, 2006, 2007, 2008 and 2009, the five months ended May 31, 2010 and the seven months ended December 31, 2010 have been derived from our consolidated financial statements, which have been audited by Ernst & Young LLP, our Independent Registered Public Accounting Firm.
The audited consolidated statements of operations, statements of changes in equity (deficit) and statements of cash flows for the years ended December 31, 2008 and 2009, the five months ended May 31, 2010 and the seven months ended December 31, 2010 are included elsewhere in this Annual Report on Form 10-K. The audited consolidated balance sheets as of December 31, 2009 and December 31, 2010 are included elsewhere in this Annual Report on Form 10-K. See Item 8. Financial Statements and Supplementary Data.
In connection with our emergence from bankruptcy effective May 31, 2010, we implemented fresh-start accounting. As required by fresh-start accounting, assets and liabilities were recorded at fair value, based on values determined in connection with the implementation of the Debtors Joint Chapter 11 Plan of Reorganization or our Plan of Reorganization. Accordingly, our financial condition and results of operations from and after our emergence from bankruptcy are not comparable to the financial condition or results of operations reflected in our historical financial statements for periods prior to our emergence from bankruptcy.
33
You should read the following data in conjunction with Item 7. Managements Discussion and Analysis of Financial Condition and Results of Operations and our consolidated financial statements and the notes thereto included elsewhere in this Annual Report on Form 10-K.
Predecessor | Successor | |||||||||||||||||||||||
Year Ended December 31, | Five Months Ended May 31, 2010 |
Seven Months Ended December 31, 2010 |
||||||||||||||||||||||
2006 | 2007 | 2008 | 2009 | |||||||||||||||||||||
Statement of operations: | (dollar amounts in millions except per share amounts) | |||||||||||||||||||||||
Net sales |
$ | 2,164.3 | $ | 2,511.2 | $ | 2,594.6 | $ | 1,945.3 | $ | 1,009.1 | $ | 1,405.0 | ||||||||||||
Cost of products sold |
1,832.1 | 2,114.1 | 2,260.1 | 1,679.0 | 832.2 | 1,172.4 | ||||||||||||||||||
Gross profit |
332.2 | 397.1 | 334.5 | 266.3 | 176.9 | 232.6 | ||||||||||||||||||
Selling, administration, & engineering expenses |
199.8 | 222.1 | 231.7 | 199.5 | 92.1 | 159.5 | ||||||||||||||||||
Amortization of intangibles |
31.0 | 31.9 | 31.0 | 15.0 | 0.3 | 9.0 | ||||||||||||||||||
Impairment charges |
13.2 | 146.4 | 33.4 | 363.5 | | | ||||||||||||||||||
Restructuring |
23.9 | 26.4 | 38.3 | 32.4 | 5.9 | 0.5 | ||||||||||||||||||
Operating profit (loss) |
64.3 | (29.7 | ) | 0.1 | (344.1 | ) | 78.6 | 63.6 | ||||||||||||||||
Interest expense, net of interest income |
(87.2 | ) | (89.5 | ) | (92.9 | ) | (64.3 | ) | (44.5 | ) | (25.0 | ) | ||||||||||||
Equity earnings |
0.2 | 2.2 | 0.9 | 4.0 | 3.6 | 3.4 | ||||||||||||||||||
Reorganization items, net |
| | | (17.4 | ) | 660.0 | | |||||||||||||||||
Other income (expense) |
7.9 | (0.5 | ) | (1.4 | ) | 9.9 | (21.2 | ) | 4.2 | |||||||||||||||
Income (loss) before income taxes |
(14.8 | ) | (117.5 | ) | (93.3 | ) | (411.9 | ) | 676.5 | 46.2 | ||||||||||||||
Provision for income taxes (benefit) |
(7.3 | ) | 32.9 | 29.3 | (55.7 | ) | 39.9 | 5.1 | ||||||||||||||||
Consolidated net income (loss) |
(7.5 | ) | (150.4 | ) | (122.6 | ) | (356.2 | ) | 636.6 | 41.1 | ||||||||||||||
Add: Net loss (income) attributable to noncontrolling interests |
(0.9 | ) | (0.6 | ) | 1.1 | 0.1 | (0.3 | ) | (0.5 | ) | ||||||||||||||
Net income (loss) attributable to Cooper-Standard Holdings Inc. |
$ | (8.4 | ) | $ | (151.0 | ) | $ | (121.5 | ) | $ | (356.1 | ) | $ | 636.3 | $ | 40.6 | ||||||||
Net income available to Cooper-Standard Holdings Inc. common stockholders |
$ | 28.7 | ||||||||||||||||||||||
Basic net income per share attributable to Cooper-Standard Holdings Inc. |
$ | 1.64 | ||||||||||||||||||||||
Diluted net income per share attributable to Cooper-Standard Holdings Inc. |
$ | 1.55 | ||||||||||||||||||||||
Balance sheet data (at end of period): |
||||||||||||||||||||||||
Cash and cash equivalents |
$ | 56.3 | $ | 40.9 | $ | 111.5 | $ | 380.3 | $ | 294.5 | ||||||||||||||
Net working capital(1) |
212.1 | 249.8 | 154.5 | 240.8 | 175.3 | |||||||||||||||||||
Total assets |
1,911.4 | 2,162.3 | 1,818.3 | 1,737.4 | 1,853.8 | |||||||||||||||||||
Total non-current liabilities |
1,256.1 | 1,351.6 | 1,346.9 | 263.9 | 751.9 | |||||||||||||||||||
Total debt(2) |
1,055.5 | 1,140.2 | 1,144.1 | 204.3 | 476.7 | |||||||||||||||||||
Liabilities subject to compromise |
| | | 1,261.9 | | |||||||||||||||||||
Preferred Stock |
| | | | 130.3 | |||||||||||||||||||
Total equity/(deficit) |
324.0 | 276.8 | 19.7 | (306.5 | ) | 563.1 | ||||||||||||||||||
Statement of cash flows data: |
||||||||||||||||||||||||
Net cash provided (used) by: |
||||||||||||||||||||||||
Operating activities |
$ | 135.9 | $ | 185.4 | $ | 136.5 | $ | 130.0 | $ | (75.4 | ) | $ | 170.6 | |||||||||||
Investment activities |
(281.8 | ) | (260.0 | ) | (73.9 | ) | (45.5 | ) | (19.1 | ) | (51.8 | ) | ||||||||||||
Financing activities |
147.6 | 55.0 | 14.1 | 166.1 | (112.6 | ) | (1.4 | ) | ||||||||||||||||
Other financial data: |
||||||||||||||||||||||||
Capital expenditures |
$ | 82.9 | $ | 107.3 | $ | 92.1 | $ | 46.1 | $ | 22.9 | $ | 54.4 |
(1) | Net working capital is defined as current assets (excluding cash and cash equivalents) less current liabilities (excluding debt payable within one year). |
(2) | Includes $450.0 million of our Senior Notes, $0.4 million in capital leases, and $26.3 million of other third-party debt at December 31, 2010. |
34
Item 7. | Managements Discussion and Analysis of Financial Condition and Results of Operations |
This managements discussion and analysis of financial condition and results of operations is intended to assist in understanding and assessing the trends and significant changes in our results of operations and financial condition. Our historical results may not indicate, and should not be relied upon as an indication of, our future performance. Our forward-looking statements reflect our current views about future events, are based on assumptions and are subject to known and unknown risks and uncertainties that could cause actual results to differ materially from those contemplated by these statements. See Item 1. BusinessForward-Looking Statements for a discussion of risks associated with reliance on forward-looking statements. Factors that may cause differences between actual results and those contemplated by forward-looking statements include, but are not limited to, those discussed below and elsewhere in this Annual Report on Form 10-K, particularly in Item 1A. Risk Factors. Managements discussion and analysis of financial condition and results of operations should be read in conjunction with Item 6. Selected Financial Data and our consolidated financial statements and the notes to those statements included elsewhere in this Annual Report on Form 10-K.
Basis of Presentation
The financial information included in this Annual Report on Form 10-K represents our consolidated financial position as of December 31, 2009 and 2010 and our consolidated results of operations and cash flows for the years ended December 31, 2008 and 2009, the five months ended May 31, 2010 and the seven months ended December 31, 2010 and reflects the application of purchase accounting. On May 31, 2010 we adopted fresh-start accounting and became a new entity for financial reporting purposes. See Note 4. Fresh-Start Accounting to the consolidated financial statements.
Company Overview
We design, manufacture and sell body sealing, AVS and fluid handling components, systems, subsystems and modules for use in passenger vehicles and light trucks manufactured by global OEMs. In 2010, approximately 81% of our sales consisted of original equipment sold directly to OEMs for installation on new vehicles. The remaining 19% of our sales were primarily to Tier I and Tier II suppliers and non-automotive manufacturers. Accordingly, sales of our products are directly affected by the annual vehicle production of OEMs and, in particular, the production levels of the vehicles for which we provide specific parts. Most of our products are custom designed and engineered for a specific vehicle platform. Our sales and product development personnel frequently work directly with the OEMs engineering departments in the design and development of our various products.
Although each OEM may emphasize different requirements as the primary criteria for judging its suppliers, we believe success as an automotive supplier generally requires outstanding performance with respect to price, quality, service, performance, design and engineering capabilities, innovation and timely delivery. Importantly, we believe our continued commitment to investment in our design and engineering capability, including enhanced computerized software design capabilities, is important to our future success, and many of our present initiatives are designed to enhance these capabilities. In addition, in order to remain competitive we must also consistently achieve and sustain cost savings. In an effort to continuously reduce our cost structure, we seek to identify and implement lean initiatives, which focus on optimizing manufacturing by eliminating waste, controlling costs and enhancing productivity. We evaluate opportunities to consolidate facilities and to relocate certain operations to lower cost countries. We believe we will continue to be successful in our efforts to improve our design and engineering capability and manufacturing processes while achieving cost savings, including through our lean initiatives.
Our OEM sales are principally generated from purchase orders issued by OEMs and as a result we have no order backlog. Once selected by an OEM to supply products for a particular platform, we typically supply those products for the life of the platform, which is normally six to eight years; although there is no guarantee that this will occur. In addition, when we are the incumbent supplier to a given platform, we believe we have a competitive advantage in winning the redesign or replacement platform.
35
In the year ended December 31, 2010, approximately 52% of our sales were generated in North America while approximately 48% of our sales were generated outside of North America. Because of our significant international operations, we are subject to the risks associated with doing business in other countries. Historically, our operations in Canada and Western Europe have not presented materially different risks or problems from those we have encountered in the United States, although the cost and complexity of streamlining operations in certain European countries is greater than would be the case in the United States. This is due primarily to labor laws in those countries that can make reducing employment levels more time-consuming and expensive than in the United States. We believe the risks of conducting business in less developed markets, including Brazil, Mexico, Poland, Czech Republic, China, Korea and India are sometimes greater than in the U.S., Canadian and Western European markets. This is due to the potential for currency volatility, high interest and inflation rates, and the general political and economic instability that are associated with these markets.
Bankruptcy Cases
On August 3, 2009, the Debtors filed voluntary petitions for Chapter 11 bankruptcy protection in the Bankruptcy Court. On August 4, 2009, CSA Canada sought relief under the Companies Creditors Arrangement Act in the Canadian Court. The Debtors and CSA Canada emerged from their respective insolvency proceedings on May 27, 2010, with approximately $480.0 million of funded debt, representing a reduction of over $650.0 million from prepetition levels.
As part of our emergence from Chapter 11, we raised $450.0 million through the issuance of our Senior Notes, and entered into a $125.0 million Senior ABL Facility, with certain agent and lending banks. In addition, we raised $355.0 million through the issuance of (i) $100.0 million of our 7% preferred stock to the Backstop Parties pursuant to a commitment agreement that provided for the backstop of our rights offering and (ii) $255.0 million of our common stock to the Backstop Parties and holders of our prepetition 8 3/8% senior subordinated notes due 2014 (the prepetition senior subordinated notes) pursuant to our rights offering. The Backstop Parties also received warrants to purchase 7% of our common stock (assuming the conversion of our 7% preferred stock) for their commitment to backstop the rights offering.
In connection with our emergence from Chapter 11, amounts outstanding under our $175.0 million debtor-in-possession financing facility and $639.6 million of claims under our prepetition credit facility were paid in full in cash. Holders of our prepetition 7% senior notes due 2012 (the prepetition senior notes) were also paid in full in cash, except that the Backstop Parties received a distribution of our common stock in lieu of the cash payment for certain of their prepetition senior note claims. Holders of our prepetition senior subordinated notes were issued 8% of our outstanding common stock and warrants to purchase, in the aggregate, 3% of our outstanding common stock (in each case, assuming the conversion of our 7% preferred stock). In addition, our obligations under both our prepetition senior notes and our prepetition senior subordinated notes were cancelled. See Liquidity and Capital ResourcesAfter Emergence from Bankruptcy Proceedings and Note 8. Debt to the consolidated financial statements for a more detailed description of our Senior Notes and Senior ABL Facility, Note 18. Capital Stock to the consolidated financial statements for a more detailed description of our equity securities and Note 3. Reorganization Under Chapter 11 of the Bankruptcy Code to the consolidated financial statements for a more detailed description of our reorganization.
In connection with our emergence from bankruptcy, we implemented fresh-start accounting. As required by fresh-start accounting, assets and liabilities were recorded at fair value, based on values determined in connection with the implementation of our Plan of Reorganization. Accordingly, our financial condition and results of operations from and after our emergence from bankruptcy are not comparable to the financial condition or results of operations reflected in our historical financial statements for periods prior to our emergence from bankruptcy.
Under the Bankruptcy Reorganization Plan, our prepetition senior subordinated notes and other obligations were extinguished. Absent an exception, a debtor recognizes cancellation of indebtedness income (CODI) upon
36
discharge of its outstanding indebtedness for an amount of consideration that is less than its adjusted issue price. The Internal Revenue Code, as amended (IRC), provides that a debtor in a bankruptcy case may exclude CODI from income but must reduce certain of its tax attributes by the amount of any CODI realized as a result of the consummation of a plan of reorganization. The amount of CODI realized by a taxpayer is the adjusted issue price of any indebtedness discharged less the sum of (i) the amount of cash paid, (ii) the issue price of any new indebtedness issued and (iii) the fair market value of any other consideration, including equity, issued. As a result of the market value of our equity upon emergence from Chapter 11 bankruptcy proceedings, our U.S. net operating loss carryforward will be reduced to zero, however a portion of our tax credit carryforwards (collectively, the Tax Attributes) will be retained after reduction of the Tax Attributes for CODI realized on emergence from Chapter 11 bankruptcy proceedings.
IRC Sections 382 and 383 provide an annual limitation with respect to the ability of a corporation to utilize its tax attributes, as well as certain built-in-losses, against future U.S. taxable income in the event of a change in ownership. The Companys emergence from Chapter 11 bankruptcy proceedings is considered a change in ownership for purposes of IRC Section 382. The limitation under the IRC is based on the value of the corporation as of the emergence date. As a result, our future U.S. taxable income may not be fully offset by the Tax Attributes if such income exceeds our annual limitation, and we may incur a tax liability with respect to such income. In addition, subsequent changes in ownership for purposes of the IRC could further diminish the Tax Attributes.
Business Environment and Outlook
Our business is directly affected by the automotive build rates in North America and Europe. It is also becoming increasingly impacted by build rates in Brazil and Asia Pacific. New vehicle demand is driven by macro-economic and other factors, such as interest rates, manufacturer and dealer sales incentives, fuel prices, consumer confidence, employment levels, income growth trends, government incentives such as cash for clunkers and tax incentives. The severe global financial crisis that started in the second half of 2008 reduced vehicle demand overall resulting in 2009 light vehicle production volumes of 8.6 million units in North America and 16.3 million units in Europe. The expected annualized light vehicle production volumes for 2011 are 12.9 million units in North America and 18.6 million units in Europe, according to IHS Automotive in December 2010.
According to IHS Automotive, actual North American light vehicle production volumes for 2010 were 11.9 million compared to 8.6 million in 2009, an increase of approximately 39.1%, and European light vehicle production volumes were 18.7 million for 2010 compared to 16.3 million in 2009, an increase of approximately 15.2%.
Competition in the automotive supplier industry is intense and has increased in recent years as OEMs have demonstrated a preference for stronger relationships with fewer suppliers. There are typically three or more significant competitors and numerous smaller competitors for most of the products we produce. Globalization and the importance to service customers around the world will continue to shape the success of suppliers going forward.
OEMs have shifted some research and development, design and testing responsibility to suppliers, while at the same time shortening new product cycle times. To remain competitive, suppliers must have state-of-the-art engineering and design capabilities and must be able to continuously improve their engineering, design and manufacturing processes to effectively service the customer. Suppliers are increasingly expected to collaborate on, or assume the product design and development of, key automotive components and to provide innovative solutions to meet evolving technologies aimed at improved emissions and fuel economy.
Pricing pressure has continued as competition for market share has reduced the overall profitability of the industry and resulted in continued pressure on suppliers for price concessions. Consolidations and market share
37
shifts among vehicle manufacturers continues to put additional pressures on the supply chain. These pricing and market pressures, along with the reduced production volumes, will continue to drive our focus on reducing our overall cost structure through lean initiatives, capital redeployment, restructuring and other cost management processes.
Results of Operations
(dollar amounts in thousands except per share amounts)
Predecessor | Successor | |||||||||||||||
Year Ended December 31, 2008 |
Year Ended December 31, 2009 |
Five Months Ended May 31, 2010 |
Seven Months Ended December 31, 2010 |
|||||||||||||
Sales |
$ | 2,594,577 | $ | 1,945,259 | $ | 1,009,128 | $ | 1,405,019 | ||||||||
Cost of products sold |
2,260,063 | 1,678,953 | 832,201 | 1,172,350 | ||||||||||||
Gross profit |
334,514 | 266,306 | 176,927 | 232,669 | ||||||||||||
Selling, administration & engineering expenses |
231,709 | 199,552 | 92,166 | 159,573 | ||||||||||||
Amortization of intangibles |
30,996 | 14,976 | 319 | 8,982 | ||||||||||||
Impairment charges |
33,369 | 363,496 | | | ||||||||||||
Restructuring |
38,300 | 32,411 | 5,893 | 488 | ||||||||||||
Operating profit (loss) |
140 | (344,129 | ) | 78,549 | 63,626 | |||||||||||
Interest expense, net of interest income |
(92,894 | ) | (64,333 | ) | (44,505 | ) | (25,017 | ) | ||||||||
Equity earnings |
897 | 4,036 | 3,613 | 3,397 | ||||||||||||
Reorganization items and fresh-start accounting adjustments, net |
| (17,367 | ) | 660,048 | | |||||||||||
Other income (expense), net |
(1,368 | ) | 9,919 | (21,156 | ) | 4,214 | ||||||||||
Income (loss) before income taxes |
(93,225 | ) | (411,874 | ) | 676,549 | 46,220 | ||||||||||
Provision (benefit) for income tax expense |
29,295 | (55,686 | ) | 39,940 | 5,095 | |||||||||||
Consolidated net income (loss) |
(122,520 | ) | (356,188 | ) | 636,609 | 41,125 | ||||||||||
Add: Net (income) loss attributed to noncontrolling interests |
1,069 | 126 | (322 | ) | (549 | ) | ||||||||||
Net income (loss) attributable to Cooper-Standard Holdings Inc. |
$ | (121,451 | ) | $ | (356,062 | ) | $ | 636,287 | $ | 40,576 | ||||||
Net income available to Cooper-Standard Holdings Inc. common stockholders |
$ | 28,723 | ||||||||||||||
Basic net income per share attributable to Cooper-Standard Holdings Inc. |
$ | 1.64 | ||||||||||||||
Diluted net income per share attributable to Cooper-Standard Holdings Inc. |
$ | 1.55 | ||||||||||||||
Seven Months Ended December 31, 2010, Five Months Ended May 31, 2010 and Twelve Months ended December 31, 2009
Due to our adoption of fresh-start accounting on May 31, 2010, the accompanying Consolidated Statements of Operations include the year-to-date results of operations of the reporting entity prior to emergence from Chapter 11 bankruptcy proceedings (the Predecessor) for the five months ended May 31, 2010 and include the results of operations of the reporting entity subsequent to emergence from Chapter 11 bankruptcy proceedings (the Successor) for the seven months ended December 31, 2010.
For the five months ended May 31, 2010, we recognized a gain of approximately $660.0 million for reorganization items as a result of the bankruptcy proceedings and the effects of fresh-start accounting. This gain reflects the cancellation of our prepetition equity, debt and certain of our other obligations, partially offset by the recognition of certain of our new equity and debt obligations, as well as professional fees incurred as a direct result of the bankruptcy proceedings.
38
In addition, we recognized charges of approximately $9.9 million in the seven months ended December 31, 2010 as a result of the bankruptcy proceedings and the adoption of fresh-start accounting. The majority of these charges related to the inventory fair value adjustment of approximately $8.1 million, which was recognized in cost of sales in the seven months ended December 31, 2010 as the inventory was sold.
Sales. Sales for the seven months ended December 31, 2010 were $1,405.0 million. Sales were favorably impacted by a significant increase in volume, partially offset by unfavorable foreign exchange of $29.3 million. Sales were $1,009.1 million for the five months ended May 31, 2010. Sales were favorably impacted by a significant increase in volume and favorable foreign exchange of $52.5 million. Sales for the twelve months ended December 31, 2009 were $1,945.3 million.
Gross Profit. Gross profit for the seven months ended December 31, 2010 and the five months ended May 31, 2010 were $232.7 million and $176.9 million, respectively. Gross profit as a percentage of sales was 16.6% for the seven months ended December 31, 2010 and 17.5% for the five months ended May 31, 2010. Gross profit and gross profit margin for these two periods were favorably impacted by a significant increase in volumes in most regions and our lean savings, partially offset by the restoration of certain employee pay and benefits and slightly higher raw material costs. The seven months ended December 31, 2010 was also impacted by the liquidation of the fair value adjustment to inventory of $8.1 million, which was recognized in cost of sales as the inventory was sold. Gross profit and gross profit as a percentage of sales for the twelve months ended December 31, 2009 were $266.3 million and 13.7%, respectively.
Selling, Administration and Engineering. Selling, administration and engineering expenses for the seven months ended December 31, 2010 were $159.6 million and $92.2 million for the five months ended May 31, 2010. Both periods were primarily impacted by the restoration of certain employee pay and benefits. Selling, administration and engineering expenses were $199.6 million for the twelve months ended December 31, 2009.
Impairment Charges. In 2009, we recorded a goodwill impairment charge of $157.2 million and impairment charges of $202.4 million related to certain intangible assets and $3.8 million related to certain fixed assets within our North America and International segments. During the second quarter of 2009, several events occurred that indicated potential impairment of our goodwill, other intangible assets and certain fixed assets. Such events included: (a) the Chapter 11 bankruptcy of both Chrysler and GM and unplanned plant shut-downs by both Chrysler and GM; (b) continued product volume risk and negative product mix changes; (c) commencement of negotiations with our former shareholders, senior secured lenders and bondholders to recapitalize our long term debt and equity; (d) recognition as the second quarter progressed that there was an increasing likelihood that we would breach our financial covenants under our prepetition credit agreement; (e) our decision to defer our June 15, 2009 interest payment on our prepetition senior and senior subordinated notes pending the outcome of our quarterly financial results; (f) an analysis of whether we would meet our financial covenants for the past quarter; and (g) negotiations with our various constituencies. As a result of the combination of the above factors, we significantly reduced our second quarter projections.
Restructuring. Restructuring charges were $0.5 million for the seven months ended December 31, 2010, $5.9 million for the five months ended May 31, 2010, primarily representing the continuation of previously announced actions, and $32.4 million for the twelve months ended December 31, 2009. Restructuring expense for the seven months ended December 31, 2010 was favorably impacted by a curtailment gain relating to pension benefits of $3.4 million. The twelve months ended December 31, 2009 was affected by the final phase of our global product line operating divisions restructurings that were initiated in the first quarter of 2009. Restructuring charges of $18.8 million of this phase were recognized for the twelve months ended December 31, 2009. Restructuring charges of $10.2 million were also recognized for the twelve months ended December 31, 2009 for facility closures in South America, Europe and Asia Pacific that were also initiated in 2009.
Interest Expense, net. Interest expense for the seven months ended December 31, 2010 consisted primarily of interest on our Senior Notes. Interest expense for the five months ended May 31, 2010 includes $28.0 million
39
of interest from the period August 3, 2009 through May 27, 2010 and interest on the DIP credit agreement. The interest on the prepetition debt obligations was recorded when our Plan of Reorganization was approved by the claimholders. Interest expense for the twelve months ended December 31, 2009 includes interest prior to August 3, 2009 on all of our prepetition debt obligations and debtor-in-possession financing.
Reorganization Items and Fresh-Start Accounting Adjustments, net. In the five months ended May 31, 2010, we recognized a gain of $520.1 million for reorganization items as a result of the bankruptcy proceedings. This gain reflects the cancellation of our prepetition equity, debt and certain of our other obligations, partially offset by the recognition of certain of our new equity and debt obligations, as well as professional fees incurred as a direct result of the bankruptcy proceedings. In addition, we recognized a gain of $139.9 million related to the valuation of our net assets upon emergence from Chapter 11 bankruptcy proceedings pursuant to the provisions of fresh-start accounting. For the year ended December 31, 2009 we recognized reorganization expenses of $17.4 million.
Other Income (Expense). Other income for the seven months ended December 31, 2010 was $4.2 million, which consisted of $3.4 million of foreign currency gains and $1.5 million other income, partially offset by $0.7 million of losses on factoring of receivables. Other expense of $21.2 million for the five months ended May 31, 2010, consisted primarily of foreign currency losses. For the twelve months ended December 31, 2009, other income consisted of a gain of $9.1 million on the repurchase of debt, $4.5 million of foreign currency gains, and $3.6 million of losses on interest rate swaps and sale of receivables.
Provision for Income Tax Expense (Benefit). For the seven months ended December 31, 2010 and the five months ended May 31, 2010, we recorded income tax provisions of $5.1 million and $39.9 million, respectively, on earnings before income taxes of $46.2 million and $676.5 million, respectively. This compares to an income tax benefit of $(55.7) million on losses before income taxes of $(411.9) million for the twelve months ended December 31, 2009. Income tax expense for the five months ended May 31, 2010 and the seven months ended December 31, 2010 differ from statutory rates primarily as a result of the reorganizational items and fresh start accounting adjustments; valuation allowances recorded on tax losses and credits generated in the U.S. and certain foreign jurisdictions; the benefit related to the settlement of a bi-lateral advanced pricing agreement; the distribution of income between the U.S. and foreign sources; and other non-recurring discrete items.
Year ended December 31, 2009 Compared to Year Ended December 31, 2008
Sales. Our sales decreased from $2,594.6 million in 2008 to $1,945.3 million in 2009, a decrease of $649.3 million, or 25.0%. The decrease resulted primarily from lower unit sales volume in both our North America (primarily the United States and Canada) and International (primarily Europe) segments. In addition, foreign currency exchange had a net unfavorable impact on sales of $110.8 million due to the relative strength of the dollar against other currencies (most notably the euro). Customer price concessions also contributed to our decrease in sales.
Gross Profit. Gross profit decreased $68.2 million from $334.5 million in 2008 to $266.3 million in 2009. As a percentage of sales, gross profit increased to 13.7% of sales in 2009 as compared to 12.9% of sales in 2008. The decrease in gross profit resulted primarily from reduced North America and Europe volume, and unfavorable product mix. The increase in gross profit margin is primarily the result of the favorable impact of management actions and various cost saving initiatives, partially offset by the lower volume.
Selling, Administration, and Engineering. Selling, administration, and engineering expenses decreased $32.2 million to $199.6 million for the year ended December 31, 2009 compared to $231.7 million for the year ended December 31, 2008. This decrease is due primarily to the favorable impact of various cost saving initiatives and management actions.
40
Operating Profit (Loss). Operating loss in 2009 was $344.1 million compared to an operating profit of $0.1 million in 2008. This decrease is primarily due to the impairment charges of $363.5 million in 2009 compared to $33.4 million in 2008, reduced volumes and unfavorable foreign exchange, partially offset by the favorable impact of management actions and various cost saving initiatives.
Impairment Charges. In 2009, we recorded a goodwill impairment charge of $157.2 million and impairment charges of $202.4 million related to certain intangible assets and $3.8 million related to certain fixed assets within our North America and International segments. During the second quarter of 2009, several events occurred that indicated potential impairment of our goodwill, other intangible assets and certain fixed assets. Such events included: (a) the Chapter 11 bankruptcy of both Chrysler and GM and unplanned plant shut-downs by both Chrysler and GM; (b) continued product volume risk and negative product mix changes; (c) commencement of negotiations with our former shareholders, senior secured lenders and bondholders to recapitalize our long term debt and equity; (d) recognition as the second quarter progressed that there was an increasing likelihood that we would breach our financial covenants under our prepetition credit agreement; (e) our decision to defer our June 15, 2009 interest payment on our prepetition senior and senior subordinated notes pending the outcome of our quarterly financial results; (f) an analysis of whether we would meet our financial covenants for the past quarter; and (g) negotiations with our various constituencies. As a result of the combination of the above factors, we significantly reduced our second quarter projections.
In 2008, we recorded a goodwill impairment charge of $23.1 million in our International segment. This charge resulted from the weakening global economy, the global decline in vehicle production volumes and changes in product mix. Also, in 2008 we recorded intangible impairment charges of $3.9 million related to certain technology in our North America segment. Based on a discounted cash flow analysis it was determined that the historical cost of these intangible assets exceeded their fair value and impairment charges were recorded. Also, in 2008 we recorded fixed asset impairment charges of $6.4 million.
Interest Expense, net. The decrease in interest expense of $28.6 million in 2009 resulted primarily from the cessation of recording interest expense on our debt obligations that were in default, decreased interest rates and decreased term loan balances.
Other Income (Expense). Other income was $9.9 million in 2009 as a result of foreign currency gains of $4.5 million and gains on debt repurchases of $9.1 million, partially offset by the loss on the sale of receivables of $1.2 million and losses on interest rate swaps of $2.4 million. Other expense of $1.4 million in 2008 was primarily a result of foreign currency losses of $0.9 million and a loss on the sale of receivables of $2.2 million, partially offset by gains on debt repurchases of $1.7 million.
Provision for Income Tax Expense (Benefit). Income taxes in 2008 included an expense of $29.3 million for an effective tax rate of 31.4% as compared to an income tax benefit of $55.7 million for an effective tax benefit rate of 13.5% in 2009. The effective tax benefit rate in 2009 differs from the statutory tax rate primarily as a result of the nondeductible nature of the goodwill impairment charge, the valuation allowances recorded on tax losses and credits generated in the United States and certain foreign jurisdictions, the benefit related to the settlement of a bi-lateral advanced pricing agreement, the distribution of income between the United States and foreign sources and other non-recurring discrete items.
41
Segment Results of Operations
The following table presents sales and segment profit (loss) for each of our reportable segments for the years ended December 31, 2008 and 2009, five months ended May 31, 2010 and seven months ended December 31, 2010:
Predecessor | Successor | |||||||||||||||
For the Year Ended | Five Months
Ended May 31, 2010 |
Seven Months
Ended December 31, 2010 |
||||||||||||||
2008 | 2009 | |||||||||||||||
(dollars in thousands) | ||||||||||||||||
Sales |
||||||||||||||||
North America |
$ | 1,244,423 | $ | 910,306 | $ | 508,738 | $ | 739,419 | ||||||||
International |
1,350,154 | 1,034,953 | 500,390 | 665,600 | ||||||||||||
$ | 2,594,577 | $ | 1,945,259 | $ | 1,009,128 | $ | 1,405,019 | |||||||||
Segment profit (loss) |
||||||||||||||||
North America |
$ | (36,662 | ) | $ | (246,015 | ) | $ | 590,121 | $ | 58,004 | ||||||
International |
(56,563 | ) | (165,859 | ) | 86,428 | (11,784 | ) | |||||||||
$ | (93,225 | ) | $ | (411,874 | ) | $ | 676,549 | $ | 46,220 | |||||||
Seven Months Ended December 31, 2010, Five Months Ended May 31, 2010 and Twelve Months ended December 31, 2009
North America. Sales for the seven months ended December 31, 2010 were $739.4 million. Sales were favorably impacted by a significant increase in volume and favorable foreign exchange of $10.0 million. Sales for the five months ended May 31, 2010 were $508.7 million. Sales were favorably impacted by a significant increase in volume and favorable foreign exchange of $19.3 million. Sales for the twelve months ended December 31, 2009 were $910.3 million. Segment profit for the seven months ended December 31, 2010 was $58.0 million, which was favorably impacted by the improved volumes and our lean savings, partially offset by the restoration of certain employee pay and benefits and slightly higher raw material costs. Segment profit for the five months ended May 31, 2010 was $590.1 million. As a result of the reorganization and fresh-start accounting adjustments, a gain of $565.1 million was recognized in the North America segment. Segment profit also increased due to improved volumes and the favorable impact of our lean savings, partially offset by the restoration of certain employee pay and benefits, slightly higher raw material costs and recognition of interest on certain prepetition debt obligations for the period of August 3, 2009 through May 27, 2010, which was recorded when our Plan of Reorganization was approved by the claimholders. Segment loss for the twelve months ended December 31, 2009 was $246.0 million, which included impairment charges of $234.9 million for goodwill, intangibles and fixed assets.
International. Sales for the seven months ended December 31, 2010 were $665.6 million. Sales were favorably impacted by a significant increase in volume partially offset by unfavorable foreign exchange of $39.3 million. Sales for the five months ended May 31, 2010 were $500.4 million. Sales were favorably impacted by a significant increase in volume and favorable foreign exchange of $33.2 million. Sales for the twelve months ended December 31, 2009 were $1,035.0 million. Segment loss for the seven months ended December 31, 2010 was $11.8 million, which was negatively impacted by higher raw material costs, restoration of certain employee pay and benefits and unfavorable foreign exchange partially offset by the improved volumes and our lean savings. Segment profit for the five months ended May 31, 2010 was $86.4 million. As a result of the reorganization and fresh-start accounting adjustments, a gain of $94.9 million was recognized in the International segment. Segment profit was unfavorably impacted by the restoration of certain employee pay and benefits and slightly higher raw material costs partially offset by improved volumes and the favorable impact of our lean savings. Segment loss for the twelve months ended December 31, 2009 was $165.9 million, which included impairment charges of $95.2 million for goodwill, intangibles and fixed assets.
42
Year Ended December 31, 2009 Compared to Year Ended December 31, 2008
North America. Sales for 2009 decreased $334.1 million, or 26.8% compared to 2008, primarily due to lower sales volume of $302.4 million and unfavorable foreign exchange of $23.4 million. Segment loss for 2009 increased by $209.4 million compared to 2008, primarily due to the increased impairment charges of goodwill, intangibles and fixed assets of $234.9 million, lower sales volume and unfavorable foreign exchange, partially offset by the favorable impact of management actions and various cost saving initiatives.
International. Sales for 2009 decreased $315.2 million, or 23.3% compared to 2008, primarily due to lower sales volume of $225.6 million and unfavorable foreign exchange $87.4 million. Segment loss for 2009 increased by $109.3 million compared to 2008, primarily due to the increased impairment charges of goodwill, intangibles and fixed assets of $95.2 million, lower sales volume and unfavorable foreign exchange, partially offset by the favorable impact of management actions and various cost saving initiatives.
Off-Balance Sheet Arrangements
As a part of our working capital management, we sell certain receivables through third party financial institutions without recourse. The amount sold varies each month based on the amount of underlying receivables and cash flow needs. At December 31, 2010 and 2009, we had $38.3 million and $39.7 million, respectively, of receivables outstanding under receivable transfer agreements entered into by various locations. For the seven months ended December 31, 2010, five months ended May 31, 2010, and twelve months ended December 31, 2009, total accounts receivables factored were $70.3 million, $40.6 million, and $115.5 million, respectively. Losses incurred on the sale of receivables were $0.7 million and $0.4 million for the seven months ended December 31, 2010 and five months ended May 31, 2010, respectively and $0.9 million for the twelve months ended December 31, 2009. These amounts are recorded in other income (expense) in the consolidated statements of operations. We continue to service the receivables for one of the locations. These are permitted transactions under our credit agreement governing our Senior ABL Facility. We are also pursuing similar arrangements in various locations.
As of December 31, 2010, we had no other material off-balance sheet arrangements.
Liquidity and Capital Resources
Short and Long-Term Liquidity Considerations and Risks
During the pendency of the Chapter 11 cases and the Canadian proceedings, our primary sources of liquidity were cash flows from operations and borrowings made under our DIP credit agreement. In addition to the cash requirements necessary to fund ongoing operations, we incurred significant professional fees and other costs in connection with the Chapter 11 cases and the Canadian proceedings.
Cash Flows
Operating activities. Cash flows provided by operations were $170.6 million for the seven months ended December 31, 2010, which includes $63.0 million of cash provided by changes in operating assets and liabilities. Cash flows used in operations were $75.4 million for the five months ended May 31, 2010, which were a result of an increase in our working capital requirements due to the significant increase in volumes and $37.2 million of interest payments on our prepetition debt obligations and DIP credit agreement. Cash flows provided by operations were $130.0 million for the twelve months ended December 31, 2009, which included $29.0 million of changes in operating assets and liabilities.
Investing activities. Cash used in investing activities was $51.8 million for the seven months ended December 31, 2010, which consisted of $54.4 million of capital spending, partially offset by proceeds from sale of assets and other of $2.6 million. Cash used in investing activities was $19.1 million for the five months ended
43
May 31, 2010, which consisted of $22.9 million of capital spending offset by proceeds from sale of assets and other of $3.9 million. Cash used in investing activities was $45.5 million for the twelve months ended December 31, 2009, which was primarily capital spending. We anticipate that we will spend approximately $100.0 million on capital expenditures in 2011.
Financing activities. Net cash used in financing activities totaled $1.4 million for the seven months ended December 31, 2010, which consisted primarily of an increase in short term debt, partially offset by dividends paid on our 7% preferred stock and payments on long-term debt. Net cash used in financing activities totaled $112.6 million for the five months ended May 31, 2010, which primarily resulted from activities related to our emergence from bankruptcy. Payments for settlement on our prepetition debt, DIP credit agreement, debt issuance costs and backstop fees totaled $914.6 million. These payments were offset by cash proceeds from the rights offering conducted pursuant to our Plan of Reorganization of $355.0 million and our Senior Notes offering of $450.0 million. Net cash provided by financing activities totaled $166.1 million for the twelve months ended December 31, 2009, which consisted primarily of debtor-in-possession financing, net of debt issuance cost of $154.4 million, a net increase of short term debt, partially offset by normal debt payments and repurchase of $10.0 million aggregate principle amount of our outstanding prepetition notes for $0.7 million.
Financing ArrangementsBefore Emergence from Bankruptcy Proceedings
Prepetition debt obligations. As of August 3, 2009, the date of the filing of the Chapter 11 cases by the Debtors, we had approximately $1.2 billion of outstanding indebtedness on a consolidated basis, of which $86.4 million consisted of draws on a senior secured revolving credit facility, $527.0 million consisted of five senior secured term loan facilities, $513.4 million consisted of our prepetition senior notes and our prepetition senior subordinated notes and $50.8 million consisted of debt on account of other credit facilities, capital leases for affiliates, swaps and other miscellaneous obligations. As a result of the filing of the Chapter 11 cases, the loan commitments of the lenders under the prepetition credit agreement were terminated (including the availability under the revolving credit facility, including with respect to standby letters of credit) and all principal and accrued and unpaid interest outstanding under the prepetition credit agreement, our prepetition senior notes and our prepetition senior subordinated notes accelerated and became due and payable, subject to an automatic stay of any action to collect, assert or recover a claim against us as a result of the commencement of the Chapter 11 proceedings and applicable bankruptcy law. Effective August 3, 2009, we ceased recording interest expense on outstanding prepetition debt instruments classified as liabilities subject to compromise.
Prepetition senior credit agreement. In connection with the 2004 Acquisition, we, Cooper-Standard Automotive Inc. (CSA U.S.), and CSA Canada entered into a credit agreement with various lending institutions, Deutsche Bank Trust Company Americas, as administrative agent, Lehman Commercial Paper Inc., as syndication agent, and Goldman Sachs Credit Partners, L.P., UBS Securities LLC and The Bank of Nova Scotia, as co-documentation agents (with subsequent amendments thereto, the prepetition credit agreement), which provided for revolving credit facilities and term loan facilities. Our revolving credit facilities provided for loans in a total principal amount of up to $125.0 million with a maturity of December 2010. The term loan facilities included a Term Loan A facility of the Canadian dollar equivalent of $51.3 million with a maturity of December 2010, a Term Loan B facility of $115.0 million with a maturity of December 2011 and a Term Loan C facility of $185.0 million with a maturity of December 2011. These term loans were used to fund the 2004 Acquisition. To finance, in part, the acquisition of fifteen fluid handling systems operations in North America, Europe and China from ITT Industries, Inc. and the MAPS acquisition, we also established and borrowed under two new term loan tranches, with an aggregate of $190.0 million borrowed in U.S. dollars and 64.725 million borrowed in euros. As of August 3, 2009, the date of the commencement of the Chapter 11 proceedings, approximately $613.4 million of principal and accrued and unpaid interest was outstanding under the prepetition credit agreement, of which $86.4 million consisted of draws on the revolving credit facilities and $527.0 million consisted of five term loan facilities.
44
As a result of the filing of the Chapter 11 cases, the loan commitments of the lenders under the prepetition credit agreement were terminated and all principal and accrued and unpaid interest outstanding under the prepetition credit agreement accelerated and became due and payable, subject to an automatic stay under applicable bankruptcy law.
Upon our emergence from bankruptcy, the prepetition credit agreement was cancelled and terminated, including all agreements relating thereto, except to the extent necessary to allow the Debtors, reorganized Debtors or the administrative agent, as applicable, to make distributions pursuant to our Plan of Reorganization on account of claims related to such prepetition credit agreement and to perform certain other administrative duties thereunder.
Prepetition senior notes and prepetition senior subordinated notes. In connection with the 2004 Acquisition, CSA U.S. issued $200.0 million aggregate principal amount of our prepetition senior notes, and $350.0 million aggregate principal amount of our prepetition senior subordinated notes. As a result of the filing of the Chapter 11 cases, all principal and accrued and unpaid interest outstanding under our prepetition senior notes and our prepetition senior subordinated notes accelerated and became due and payable, subject to an automatic stay under applicable bankruptcy law.
Upon our emergence from bankruptcy, our prepetition senior notes and our prepetition senior subordinated notes were cancelled and the indentures governing such obligations were terminated, except to the extent necessary to allow the Debtors, reorganized Debtors or the relevant trustee, as applicable, to make distributions pursuant to our Plan of Reorganization on account of claims related to such notes and perform certain other administrative duties or exercise certain protective rights thereunder.
DIP financing. In connection with the commencement of the Chapter 11 cases and the Canadian proceedings, we and certain of our subsidiaries entered into a Debtor-In-Possession Credit Agreement, dated August 5, 2009 (the initial DIP credit agreement) with various lenders party thereto. On December 2, 2009, Metzeler Automotive Profile Systems GmbH, a German limited liability company, became an additional borrower under our initial DIP credit agreement. Under our initial DIP credit agreement, we borrowed an aggregate of $175.0 million principal amount of superpriority senior secured term loans in order to finance our operating, working capital and other general corporate needs (including the payment of fees and expenses in accordance with the orders of the Bankruptcy Court and the Canadian Court authorizing such borrowings).
In order to refinance our initial DIP credit agreement on terms more favorable to us, we and certain of our subsidiaries entered into the DIP credit agreement on December 18, 2009 with various lenders party thereto, which provided for superpriority senior secured term loans in an aggregate principal amount of up to $175.0 million, subject to certain conditions, and an uncommitted $25.0 million incremental facility.
Following the entry of a final order by the Bankruptcy Court approving our DIP credit agreement, on December 29, 2009, we borrowed $175.0 million under our DIP credit agreement. All of the proceeds of the borrowings under our DIP credit agreement, together with our cash on hand, were used to repay all borrowings and amounts outstanding under our initial DIP credit agreement, and to pay related fees and expenses. We prepaid $25.0 million of the borrowings under our DIP credit agreement on each of January 29, 2010, March 26, 2010, April 20, 2010 and May 18, 2010. In addition, we repaid $0.2 million on March 31, 2010. The remaining balance was repaid upon our emergence from bankruptcy, at which time our DIP credit agreement was cancelled and terminated, including all agreements related thereto.
Financing ArrangementsAfter Emergence from Bankruptcy Proceedings
As part of our Plan of Reorganization, we issued $450.0 million of our Senior Notes and entered into our $125.0 million Senior ABL Facility. Proceeds from our Senior Notes offering, together with proceeds of the rights offering and cash on hand, were used to pay claims under the prepetition credit agreement, our DIP credit
45
agreement and the portion of the prepetition senior notes payable in cash, in full, together with related fees and expenses. Upon our emergence from bankruptcy, we had $479.3 million of outstanding indebtedness, consisting of $450.0 million of our Senior Notes and $29.3 million in other debt of certain of our foreign subsidiaries. We intend to fund our ongoing capital and working capital requirements through a combination of cash flows from operations and borrowings under our Senior ABL Facility. We anticipate that funds generated by operations and funds available under our Senior ABL Facility will be sufficient to meet working capital requirements for the next 12 months. Our Senior Notes and Senior ABL Facility are described below. For additional information, see Note 8. Debt to the consolidated financial statements.
Based on our current and anticipated levels of operations and the condition in our markets and industry, we believe that our cash on hand, cash flow from operations and availability under our Senior ABL Facility will enable us to meet our working capital, capital expenditures, debt service and other funding requirements for the foreseeable future. However, our ability to fund our working capital needs, debt payments and other obligations, and to comply with the financial covenants, including borrowing base limitations, under our Senior ABL Facility, depends on our future operating performance and cash flow and many factors outside of our control, including the costs of raw materials, the state of the overall automotive industry and financial and economic conditions and other factors. Any future acquisitions, joint ventures or other similar transactions will likely require additional capital and there can be no assurance that any such capital will be available to us on acceptable terms, if at all.
Senior ABL Facility
On the date of our emergence from bankruptcy, Cooper-Standard Holdings Inc. (Parent), CSA U.S. (the Issuer or the U.S. Borrower), CSA Canada (the Canadian Borrower and, together with the U.S. Borrower, the Borrowers), and certain subsidiaries of the U.S. Borrower entered into the Senior ABL Facility, with certain lenders, Bank of America, N.A., as agent (the Agent) for such lenders, Deutsche Bank Trust Company Americas, as syndication agent, and Banc of America Securities LLC, Deutsche Bank Securities Inc., UBS Securities LLC and Barclays Capital, as joint lead arrangers and bookrunners. A summary of our Senior ABL Facility is set forth below. This description is qualified in its entirety by reference to the credit agreement governing our Senior ABL Facility.
General. Our Senior ABL Facility provides for an aggregate revolving loan availability of up to $125.0 million, subject to borrowing base availability, including a $45.0 million letter of credit sub-facility and a $20.0 million swing line sub-facility. Our Senior ABL Facility also provides for an uncommitted $25.0 million incremental loan facility, for a potential total Senior ABL Facility of $150.0 million (if requested by the Borrowers and agreed to by the lenders). No consent of any lender (other than those participating in the increase) is required to effect any such increase.
Maturity. Any borrowings under our Senior ABL Facility will mature, and the commitments of the lenders under our Senior ABL Facility will terminate, on May 27, 2014.
Borrowing base. Loan (and letter of credit) availability under our Senior ABL Facility is subject to a borrowing base, which at any time is limited to the lesser of: (A) the maximum facility amount (subject to certain adjustments) and (B) (i) up to 85% of eligible accounts receivable; plus (ii) up to the lesser of 70% of eligible inventory or 85% of the appraised net orderly liquidation value of eligible inventory; minus reserves established by the Agent. The accounts receivable portion of the borrowing base is subject to certain formulaic limitations (including concentration limits). The inventory portion of the borrowing base is limited to eligible inventory, as determined by an independent appraisal. The borrowing base is also subject to certain reserves, which are established by the Agent (which may include changes to the advance rates indicated above). Loan availability under our Senior ABL Facility is apportioned, as follows: $100.0 million to the U.S. Borrower and $25.0 million to the Canadian Borrower.
46
Guarantees; security. The obligations of the U.S. Borrower under our Senior ABL Facility and cash management arrangements and interest rate, foreign currency or commodity swaps entered into by us, in each case with the lenders and their affiliates, or, collectively, additional ABL secured obligations, are guaranteed on a senior secured basis by Parent and all of Parents wholly-owned U.S. subsidiaries (other than CS Automotive LLC), and the obligations of the Canadian Borrower under our Senior ABL Facility and additional ABL secured obligations of the Canadian Borrower and its Canadian subsidiaries are guaranteed on a senior secured basis by Parent, all of the Canadian subsidiaries of the Canadian Borrower and all of Parents wholly-owned U.S. subsidiaries. The U.S. Borrower guarantees the additional ABL secured obligations of its subsidiaries and the Canadian Borrower guarantees the additional ABL secured obligations of its Canadian subsidiaries. The obligations under our Senior ABL Facility and related guarantees are secured by a first priority lien on all of each Borrowers and each guarantors existing and future personal property consisting of accounts receivable, payment intangibles, inventory, documents, instruments, chattel paper and investment property, certain money, deposit accounts, securities accounts, letters of credit, commercial tort claims and certain related assets and proceeds of the foregoing.
Interest. Borrowings under our Senior ABL Facility bear interest at a rate equal to, at the Borrowers option:
| in the case of borrowings by the U.S. Borrower, LIBOR or the base rate plus, in each case, an applicable margin; or |
| in the case of borrowings by the Canadian Borrower, bankers acceptance (BA) rate, Canadian prime rate or Canadian base rate plus, in each case, an applicable margin. |
The applicable margin may vary between 3.25% and 3.75% with respect to the LIBOR or BA-based borrowings and between 2.25% and 2.75% with respect to base rate, Canadian prime rate and Canadian base rate borrowings. The applicable margin is subject, in each case, to quarterly pricing adjustments based on usage over the immediately preceding quarter.
Covenants; events of default. Our Senior ABL Facility includes affirmative and negative covenants that will impose substantial restrictions on our financial and business operations, including our ability to incur and secure debt, make investments, sell assets, pay dividends or make acquisitions. Our Senior ABL Facility also includes a requirement to maintain a monthly fixed charge coverage ratio of no less than 1.1 to 1.0 when availability under our Senior ABL Facility is less than specified levels. Our Senior ABL Facility also contains various events of default that are customary for comparable facilities.
Our current revenue forecast for 2011 is determined from specific platform volume projections consistent with a North American and European light vehicle production estimate of 12.9 million units and 18.6 million units, respectively. Adverse changes to the vehicle production levels could have a negative impact on our future sales, liquidity, results of operations and ability to comply with our debt covenants under our Senior ABL Facility or any future financing arrangements we enter into. We took significant actions during the second half of 2008 and first quarter of 2009 to reduce our cost base and improve profitability. While we believe the vehicle production and other assumptions within our forecast are reasonable, we have also considered the possibility of even weaker demand. In addition to the potential impact of changes on our sales, our current operating performance and future compliance with the covenants under our Senior ABL Facility or any future financing arrangements we enter into are dependent upon a number of other external and internal factors, such as changes in raw material costs, changes in foreign currency rates, our ability to execute our cost savings initiatives, our ability to implement and achieve the savings expected by the changes in our operating structure and other factors beyond our control.
8 1/2% Senior Notes due 2018
On May 11, 2010, CSA Escrow Corporation (the escrow issuer), an indirect wholly-owned non-Debtor subsidiary of the Issuer closed an offering of $450.0 million aggregate principal amount of its Senior Notes. The
47
Senior Notes were issued in a private placement exempt from registration under the Securities Act. A summary description of the Senior Notes is set forth below. This description is qualified in its entirety by reference to the Senior Notes indenture.
General. The Senior Notes were issued pursuant to an indenture dated May 11, 2010 by and between the escrow issuer and the trustee thereunder. On the effective date of our Plan of Reorganization, the escrow issuer was merged with and into the Issuer, with the Issuer as the surviving entity, and upon the consummation of the merger, the Issuer assumed the obligations under the Senior Notes and the Senior Notes indenture and the guarantees by the guarantors described below became effective.
Guarantees. The Senior Notes are unconditionally guaranteed, jointly and severally, on a senior unsecured basis, by Parent and all of the Issuers wholly-owned domestic restricted subsidiaries (collectively, the guarantors and, together with the Issuer, the obligors). If the Issuer or any of its domestic restricted subsidiaries acquires or creates another wholly-owned domestic restricted subsidiary that guarantees certain debt of the Issuer or a guarantor, such newly acquired or created subsidiary is also required to guarantee the Senior Notes.
Ranking. The Senior Notes and each guarantee constitute senior debt of the Issuer and each guarantor, respectively. The Senior Notes and each guarantee (1) rank equally in right of payment with all of the applicable obligors existing and future senior debt, (2) rank senior in right of payment to all of the applicable obligors existing and future subordinated debt, (3) are effectively subordinated in right of payment to all of the applicable obligors existing and future secured indebtedness and secured obligations to the extent of the value of the collateral securing such indebtedness and obligations and (4) are structurally subordinated to all existing and future indebtedness and other liabilities of the Issuers non-guarantor subsidiaries (other than indebtedness and liabilities owed to the Issuer or one of the guarantors).
Optional redemption. The Issuer has the right to redeem the Senior Notes at the redemption prices set forth below:
| on and after May 1, 2014, all or a portion of the Senior Notes may be redeemed at a redemption price of 104.250% of the principal amount thereof if redeemed during the twelve-month period beginning on May 1, 2014, 102.125% of the principal amount thereof if redeemed during the twelve-month period beginning on May 1, 2015, and 100% of the principal amount thereof if redeemed on or after May 1, 2016, in each case plus any accrued and unpaid interest to the redemption date; |
| prior to May 1, 2013, up to 35% of the Senior Notes issued under the Senior Notes indenture may be redeemed with the proceeds from certain equity offerings at a redemption price of 108.50% of the principal amount thereof, plus any accrued and unpaid interest to the redemption date; and |
| prior to May 1, 2014, all or a portion of the Senior Notes may be redeemed at a price equal to 100% of the principal amount thereof plus a make-whole premium. |
Change of control. If a change of control occurs with respect to Parent or the Issuer, unless the Issuer has exercised its right to redeem all of the outstanding Senior Notes, each noteholder shall have the right to require that the Issuer repurchase such noteholders Senior Notes at a purchase price in cash equal to 101% of the principal amount thereof plus accrued and unpaid interest, if any, to the date of purchase, subject to the right of the noteholders of record on the relevant record date to receive interest due on the relevant interest payment date.
Covenants. The Senior Notes indenture limits, among other things, the ability of the Issuer and its restricted subsidiaries, (currently, all majority owned subsidiaries) to pay dividends or make distributions, repurchase equity, prepay subordinated debt or make certain investments, incur additional debt or issue certain disqualified stock or preferred stock, sell assets, incur liens, enter into transactions with affiliates and allow to exist certain restrictions on the ability of a restricted subsidiary to pay dividends or to make other payments or loans to or
48
transfer assets to the Issuer; in each case, subject to certain exclusions and other customary exceptions. The Senior Notes indenture also limits the ability of the Issuer, Parent and a subsidiary guarantor to merge or consolidate with another entity or sell all or substantially all of its assets. In addition, certain of these covenants will not be applicable during any period of time when the Senior Notes have an investment grade rating. The Senior Notes indenture contains customary events of default.
The Senior Notes were initially issued in a private placement which was exempt from registration under the Securities Act of 1933, as amended (the Securities Act). Pursuant to the terms of the registration rights agreement between the issuer, the guarantors and the initial purchasers of the Senior Notes, we consummated a registered exchange offer in February 2011, pursuant to which we exchanged all $450.0 million principal amount of the outstanding privately placed Senior Notes, or old notes, for $450.0 million principal amount of new 8 1/2% Senior Notes due 2018, or exchange notes. The exchange notes were issued under the same indenture as the old notes and are identical to the old notes, except that the new notes have been registered under the Securities Act. References herein to the Senior Notes refer to the old notes prior to the consummation of the exchange offer and to the exchange notes thereafter.
Non-GAAP Financial Measures
In evaluating our business, management considers EBITDA and Adjusted EBITDA as key indicators of our operating performance. Our management also uses EBITDA and Adjusted EBITDA:
| because similar measures are utilized in the calculation of the financial covenants and ratios contained in our financing arrangements; |
| in developing our internal budgets and forecasts; |
| as a significant factor in evaluating our management for compensation purposes; |
| in evaluating potential acquisitions; |
| in comparing our current operating results with corresponding historical periods and with the operational performance of other companies in our industry; and |
| in presentations to the members of our board of directors to enable our board of directors to have the same measurement basis of operating performance as is used by management in their assessments of performance and in forecasting and budgeting for our company. |
In addition, we believe EBITDA and Adjusted EBITDA and similar measures are widely used by investors, securities analysts and other interested parties in evaluating our performance. We define Adjusted EBITDA as net income (loss) plus provision for income tax expense (benefit), interest expense, net of interest income, depreciation and amortization or EBITDA, as adjusted for items that management does not consider to be reflective of our core operating performance. These adjustments include restructuring costs, impairment charges, non-cash fair value adjustments, acquisition related costs, professional fees and expenses associated with our reorganization, non-cash stock based compensation and non-cash gains and losses from certain foreign currency transactions and translation.
We calculate EBITDA and Adjusted EBITDA by adjusting net income (loss) to eliminate the impact of a number of items we do not consider indicative of our ongoing operating performance. You are encouraged to evaluate each adjustment and the reasons we consider it appropriate for supplemental analysis. EBITDA and Adjusted EBITDA are not financial measurements recognized under U.S. generally accepted accounting principles (U.S. GAAP), and when analyzing our operating performance, investors should use EBITDA and Adjusted EBITDA in addition to, and not as alternatives for, net income (loss), operating income, or any other performance measure derived in accordance with U.S. GAAP, or as an alternative to cash flow from operating activities as a measure of our liquidity. EBITDA and Adjusted EBITDA have limitations as analytical tools, and
49
they should not be considered in isolation or as substitutes for analysis of our results of operations as reported under U.S. GAAP. These limitations include:
| they do not reflect our cash expenditures or future requirements for capital expenditure or contractual commitments; |
| they do not reflect changes in, or cash requirements for, our working capital needs; |
| they do not reflect interest expense or cash requirements necessary to service interest or principal payments under our Senior Notes and Senior ABL Facility; |
| they do not reflect certain tax payments that may represent a reduction in cash available to us; |
| although depreciation and amortization are non-cash charges, the assets being depreciated or amortized may have to be replaced in the future, and EBITDA and Adjusted EBITDA do not reflect cash requirements for such replacements; and |
| other companies, including companies in our industry, may calculate these measures differently and, as the number of differences in the way companies calculate these measures increases, the degree of their usefulness as a comparative measure correspondingly decreases. |
In addition, in evaluating Adjusted EBITDA, it should be noted that in the future we may incur expenses similar to the adjustments in the below presentation. Our presentation of Adjusted EBITDA should not be construed as an inference that our future results will be unaffected by unusual or non-recurring items.
The following table provides a reconciliation of EBITDA and Adjusted EBITDA to net income, which is the most directly comparable financial measure in accordance with U.S. GAAP (dollars in millions):
Predecessor | Successor | |||||||
Five Months Ended May 31, 2010 |
Seven Months Ended December 31, 2010 |
|||||||
Net income |
$ | 636.3 | $ | 40.6 | ||||
Provision for income tax expense |
39.9 | 5.1 | ||||||
Interest expense, net of interest income |
44.5 | 25.0 | ||||||
Depreciation and amortization |
35.7 | 66.7 | ||||||
EBITDA |
$ | 756.4 | $ | 137.4 | ||||
Reorganization and fresh-start accounting adjustments(1) |
(660.0 | ) | | |||||
Restructuring(2) |
5.9 | 0.5 | ||||||
Foreign exchange gains/losses(3) |
17.2 | (0.1 | ) | |||||
Inventory write-up(4) |
| 8.1 | ||||||
Stock-based compensation(5) |
0.2 | 6.4 | ||||||
Severance(6) |
| 5.8 | ||||||
Other |
0.3 | (1.6 | ) | |||||
Adjusted EBITDA |
$ | 120.0 | $ | 156.5 | ||||
(1) | Reorganization and bankruptcy-related expenses, including professional fees. |
(2) | Includes non-cash restructuring. |
(3) | Foreign exchange gains and losses on prepetition debt and various intercompany loans. |
(4) | Reversal of fresh-start fair value inventory adjustment. |
(5) | Non-cash stock amortization expense and non-cash stock option expense. |
(6) | Severance costs associated with the right sizing of our German facilities. |
50
Working capital
Historically, we have not generally experienced difficulties in collecting our accounts receivable, but the dynamics associated with the recent economic downturn have impacted both the amount of our receivables and the stressed ability for our customers to pay within normal terms. Certain government sponsored programs may ease these constraints, but pressure on accounts receivable will continue until vehicle sales and production volumes stabilize. As of December 31, 2010, we had net cash of $294.5 million.
Contractual Obligations
Our contractual cash obligations consist of legal commitments requiring us to make fixed or determinable cash payments, regardless of the contractual requirements of the vendor to provide future goods or services. Except as otherwise disclosed, this table does not include information on our recurring purchase of materials for use in production because our raw materials purchase contracts typically do not require fixed or minimum quantities.
The following table summarizes the total amounts due as of December 31, 2010 under all debt agreements, commitments and other contractual obligations.
Payment due by period | ||||||||||||||||||||
Contractual Obligations | Total | Less than 1 year |
1-3 Years | 3-5 years | More than 5 Years |
|||||||||||||||
(dollars in millions) | ||||||||||||||||||||
Debt obligations |
$ | 450.0 | $ | | $ | | $ | | $ | 450.0 | ||||||||||
Interest on debt obligations |
286.9 | 38.3 | 76.5 | 76.5 | 95.6 | |||||||||||||||
Operating lease obligations |
80.6 | 19.1 | 26.3 | 17.9 | 17.3 | |||||||||||||||
Other obligations(1) |
65.8 | 58.9 | 6.0 | 0.6 | 0.3 | |||||||||||||||
Total |
$ | 883.3 | $ | 116.3 | $ | 108.8 | $ | 95.0 | $ | 563.2 | ||||||||||
(1) | Noncancellable purchase order commitments for capital expenditures, other borrowings and capital lease obligations. |
In addition to our contractual obligations and commitments set forth in the table above, we have employment arrangements with certain key executives that provide for continuity of management. These arrangements include payments of multiples of annual salary, certain incentives, and continuation of benefits upon the occurrence of specified events in a manner that is believed to be consistent with comparable companies.
We also have minimum funding requirements with respect to our pension obligations. We expect to make cash contributions of approximately $31.9 million to our domestic and foreign pension plan asset portfolios in 2011. Our minimum funding requirements after 2011 will depend on several factors, including the investment performance of our retirement plans and prevailing interest rates. Our funding obligations may also be affected by changes in applicable legal requirements. We also have payments due with respect to our postretirement benefit obligations. We do not prefund our postretirement benefit obligations. Rather, payments are made as costs are incurred by covered retirees. We expect other postretirement benefit net payments to be approximately $3.3 million in 2011.
We may be required to make significant cash outlays due to our unrecognized tax benefits. However, due to the uncertainty of the timing of future cash flows associated with our unrecognized tax benefits, we are unable to make reasonably reliable estimates of the period of cash settlement, if any, with the respective taxing authorities. Accordingly, unrecognized tax benefits of $2.8 million as of December 31, 2010 have been excluded from the contractual obligations table above. For further information related to unrecognized tax benefits, see Note 11. Income Taxes to the consolidated financial statements.
51
In addition, excluded from the contractual obligation table are open purchase orders at December 31, 2010 for raw materials and supplies used in the normal course of business, supply contracts with customers, distribution agreements, joint venture agreements and other contracts without express funding requirements.
Raw Materials and Manufactured Components
The principal raw materials for our business include fabricated metal-based components, synthetic rubber, carbon black, natural rubber, process oil and plastic components. We manage the procurement of our raw materials to assure supply and to obtain the most favorable pricing. For natural rubber, procurement is managed by buying in advance of production requirements and by buying in the spot market. For other principal materials, procurement arrangements include short-term supply agreements that may contain formula-based pricing based on commodity indices. These arrangements provide quantities needed to satisfy normal manufacturing demands.
We believe we have adequate sources for the supply of raw materials and components for our products with suppliers located around the world. We often use offshore suppliers for machined components, metal stampings, castings and other labor-intensive, economically freighted products.
Extreme fluctuations in material pricing have occurred in recent years adding challenges in forecasting supply costs. The inability to recover higher than anticipated material costs from our customers would impact our profitability.
Seasonal Trends
Sales to automotive customers are lowest during the months prior to model changeovers and during assembly plant shutdowns. These typically result in lower sales volumes during July, August, and December. However, economic conditions can change normal seasonality trends, resulting in reduced demand throughout the year. The impact of model changeovers and plant shutdowns is considerably less in years of reduced demand overall.
Restructuring
We continually evaluate alternatives in an effort to align our business with the changing needs of our customers and lower the operating costs of the Company. This may include the realignment of our existing manufacturing capacity, facility closures or similar actions. See Note 5. Restructuring to the consolidated financial statements included in this Annual Report on Form 10-K.
Critical Accounting Policies and Estimates
Our accounting policies are more fully described in Note 2. Significant Accounting Policies, to the consolidated financial statements. Application of these accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, the disclosure of contingent assets and liabilities, and the reported amounts of revenues and expenses during the reporting period. Management bases its estimates and judgments on historical experience and on other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions. We believe that of our significant accounting policies, the following may involve a higher degree of judgment or estimation than other accounting policies.
Adoption of Fresh-Start Accounting. We emerged from Chapter 11 bankruptcy proceedings on May 27, 2010. As a result, we adopted fresh-start accounting as (i) the reorganization value of the Predecessors assets immediately prior to the confirmation of the Plan of Reorganization was less than the total of all post-petition liabilities and allowed claims and (ii) the holders of the Predecessors existing voting shares immediately prior to
52
the confirmation of the Plan of Reorganization received less than 50% of the voting shares of the emerging entity. GAAP requires the adoption of fresh-start accounting as of the Plan of Reorganizations confirmation date, or as of a later date when all material conditions precedent to the Plan of Reorganization becoming effective are resolved, which occurred on May 27, 2010. We elected to adopt fresh-start accounting as of May 31, 2010 to coincide with the timing of our normal May accounting period close. There were no transactions that occurred from May 28, 2010 through May 31, 2010, that would materially impact our consolidated financial position, results of operations or cash flows for the 2010 Successor or 2010 Predecessor periods.
Fresh-start accounting results in a new basis of accounting and reflects the allocation of our estimated fair value to our underlying assets and liabilities. Our estimates of fair value are inherently subject to significant uncertainties and contingencies beyond our reasonable control. Accordingly, there can be no assurance that the estimates, assumptions, valuations, appraisals and financial projections will be realized, and actual results could vary materially.
Our reorganization value was allocated to our assets in conformity with the procedures specified by ASC 805, Business Combinations. The excess of reorganization value over the fair value of tangible and identifiable intangible assets was recorded as goodwill. Liabilities existing as of the effective date of the Plan of Reorganization, other than deferred taxes, were recorded at the present value of amounts expected to be paid using appropriate risk adjusted interest rates. Deferred taxes were determined in conformity with applicable income tax accounting standards. Predecessor accumulated depreciation, accumulated amortization, retained deficit, common stock and accumulated other comprehensive loss were eliminated.
For further information on fresh-start accounting, see Note 4. Fresh-Start Accounting to the consolidated financial statements included in this Annual Report on Form 10-K.
Reorganization. As a result of filing for Chapter 11 bankruptcy, we adopted ASC 852 on August 3, 2009. ASC 852 is applicable to companies in Chapter 11 and generally does not change the manner in which financial statements are prepared. However, among other disclosures, it does require that the financial statements for periods subsequent to the filing of the Chapter 11 petition distinguish transactions and events that are directly associated with the reorganization from the ongoing operations of the business. Revenues, expenses, realized gains and losses and provisions for losses that can be directly associated with the reorganization and restructuring of the business must be reported separately as reorganization items in the statements of operations. The balance sheet must distinguish prepetition liabilities subject to compromise from both those prepetition liabilities that are not subject to compromise and from post-petition liabilities. Liabilities that may be affected by a plan of reorganization must be reported at the amounts expected to be allowed, even if they may be settled for lesser amounts. In addition, reorganization items must be disclosed separately in the statement of cash flows. We have segregated those items as outlined above for all reporting periods subsequent to such date.
Pre-Production Costs Related to Long Term Supply Arrangements. Costs for molds, dies, and other tools owned by us to produce products under long-term supply arrangements are recorded at cost in property, plant, and equipment and amortized over the lesser of three years or the term of the related supply agreement. We expense all pre-production tooling costs related to customer-owned tools for which reimbursement is not contractually guaranteed by the customer.
Goodwill. As of December 31, 2009 and 2010, we had recorded goodwill of approximately $87.7 million and $137.0 million, respectively. Goodwill recorded as of December 31, 2010 reflects the adoption of fresh-start accounting, See Note 4. Fresh-Start Accounting to the consolidated financial statements. Goodwill is not amortized but is tested annually for impairment. We evaluate each reporting units fair value versus its carrying value annually or more frequently if events or changes in circumstances indicate that the carrying value may exceed the fair value of the reporting unit. Estimated fair values are based on the cash flows projected in the reporting units strategic plans and long-range planning forecasts discounted at a risk-adjusted rate of return. We assess the reasonableness of these estimated fair values using market based multiples of comparable companies.
53
If the carrying value exceeds the fair value, an impairment loss is measured and recognized. Goodwill fair value measurements are classified within Level 3 of the fair value hierarchy, which are generally determined using unobservable inputs. We conduct our annual goodwill impairment as of October 1st of each year.
Our 2010 annual goodwill impairment analysis, completed as of the first day of the fourth quarter, resulted in no impairment. The fair value of our Europe, South America and Asia Pacific reporting units did not substantially exceed their corresponding carrying amount. We emerged from Chapter 11 on May 27, 2010 and our reporting units were fair valued at that time, therefore we would not expect the fair values of the reporting units to substantially exceed their corresponding carrying amounts. If different assumptions were used in our cash flow projections the fair values could be different and impairment of goodwill might be required to be recorded.
During the second quarter of 2009, several events occurred that indicated potential impairment of our goodwill. Such events included: (a) the Chapter 11 bankruptcy of both Chrysler and GM and unplanned plant shut-downs by both GM and Chrysler; (b) continued product volume risk and negative product mix changes; (c) commencement of negotiations with our sponsors, senior secured lenders, and bondholders to recapitalize our long term debt and equity; (d) recognition as the second quarter progressed that there was an increasing likelihood that we would breach our financial covenants under our prepetition credit agreement; and (e) our decision to defer our June 15, 2009 interest payment on our prepetition senior and senior subordinated notes pending the outcome of our quarterly financial results; (f) an analysis of whether we would meet our financial covenants for the past quarter and (g) negotiations with various constituencies. As a result of the combination of the above factors, we significantly reduced our projections in the second quarter.
Other significant assumptions used in the discounted cash flow model include discount rate, terminal value growth rate, future capital expenditures and changes in future working capital requirements. These assumptions were not modified significantly as part of the 2009 interim goodwill impairment assessment. The significant decrease in the financial projections resulted in an enterprise value significantly lower than the amount computed in connection with the 2008 annual impairment assessment. This significant decrease in enterprise value resulted in the carrying value of assets at all of our reporting units being greater than the related reporting units fair value. As a result, we recorded goodwill impairment charges of $93.6 million in our North America reporting unit, $39.6 million in our Europe reporting unit, $22.6 million in our South America reporting unit and $1.4 million in our Asia Pacific reporting unit during the second quarter of 2009. While we believe our estimates of fair value are reasonable based upon current information and assumptions about future results, changes in our businesses, the markets for our products, the economic environment and numerous other factors could significantly alter our fair value estimates and result in future impairment of recorded goodwill in our North America and International reporting segments.
Long-Lived Assets. We monitor our long-lived assets for impairment indicators on an ongoing basis in accordance with ASC Topic 360, Property, Plant, and Equipment. If impairment indicators exist, we perform the required analysis by comparing the undiscounted cash flows expected to be generated from the long-lived assets to the related net book values. If the net book value exceeds the undiscounted cash flows, an impairment loss is measured and recognized. An impairment loss is measured as the difference between the net book value and the fair value of the long-lived assets. Fair value is estimated based upon either discounted cash flow analyses or estimated salvage values. Cash flows are estimated using internal budgets based on recent sales data, independent automotive production volume estimates and customer commitments, as well as assumptions related to discount rates. Change in economic or operating conditions impacting these estimates and assumptions could result in the impairment of long-lived assets.
As a result of testing performed in 2009 in accordance with ASC 360, we recorded asset and definite lived intangible asset impairment charges of $3.8 million and $202.4 million, respectively. Of the $3.8 million of asset impairment charges, $1.1 million was recorded in our North America segment and $2.7 million was recorded in our International segment. Of the $202.4 million of definite lived intangible asset impairment charges, $148.1 million was recorded in our North America segment and $54.3 million was recorded in our International segment.
54
In connection with the adoption of fresh-start accounting an adjustment of $40.7 million was made to re-measure our property, plant, and equipment to their estimated fair value. See Note 4. Fresh-Start Accounting, to the consolidated financial statements.
Restructuring-Related Reserves. Specific accruals have been recorded in connection with restructuring initiatives, as well as the integration of acquired businesses. These accruals include estimates principally related to employee separation costs, the closure and/or consolidation of facilities, contractual obligations, and the valuation of certain assets. Actual amounts recognized could differ from the original estimates. Restructuring-related reserves are reviewed on a quarterly basis and changes to plans are appropriately recognized when identified. Changes to plans associated with the restructuring of existing businesses are generally recognized as employee separation and plant phaseout costs in the period the change occurs. For additional discussion, please refer to Note 5. Restructuring to the consolidated financial statements.
Revenue Recognition and Sales Commitments. We generally enter into agreements with our customers to produce products at the beginning of a vehicles life. Although such agreements do not generally provide for minimum quantities, once we enter into such agreements, fulfillment of our customers purchasing requirements can be our obligation for an extended period or the entire production life of the vehicle. These agreements generally may be terminated by our customer at any time. Historically, terminations of these agreements have been minimal. In certain limited instances, we may be committed under existing agreements to supply products to our customers at selling prices which are not sufficient to cover the direct cost to produce such products. In such situations, we recognize losses as they are incurred.
We receive blanket purchase orders from many of our customers on an annual basis. Generally, such purchase orders and related documents set forth the annual terms, including pricing, related to a particular vehicle model. Such purchase orders generally do not specify quantities. We recognize revenue based on the pricing terms included in our annual purchase orders as our products are shipped to our customers. As part of certain agreements, we are asked to provide our customers with annual cost reductions. We accrue for such amounts as a reduction of revenue as our products are shipped to our customers. In addition, we generally have ongoing adjustments to our pricing arrangements with our customers based on the related content and cost of our products. Such pricing accruals are adjusted as they are settled with our customers.
Amounts billed to customers related to shipping and handling are included in sales in our consolidated statements of operations. Shipping and handling costs are included in cost of sales in our consolidated statements of operations.
Income Taxes. In determining the provision for income taxes for financial statement purposes, we make estimates and judgments which affect our evaluation of the carrying value of our deferred tax assets as well as our calculation of certain tax liabilities. In accordance with ASC Topic 740, Accounting for Income Taxes, we evaluate the carrying value of our deferred tax assets on a quarterly basis. In completing this evaluation, we consider all available positive and negative evidence. Such evidence includes historical operating results, the existence of cumulative losses in the most recent fiscal years, expectations for future pretax operating income, the time period over which our temporary differences will reverse, and the implementation of feasible and prudent tax planning strategies. Deferred tax assets are reduced by a valuation allowance if, based on the weight of this evidence, it is more likely than not that all or a portion of the recorded deferred tax assets will not be realized in future periods.
During 2010, due to our recent operating performance in the United States and current industry conditions, we continued to assess, based upon all available evidence, that it was more likely than not that we would not realize our U.S. deferred tax assets. During 2010, our U.S. valuation allowance decreased by $53.5 million, primarily related to the reduction of tax attributes to offset the cancellation of debt income generated as part of the Chapter 11 bankruptcy.
55
At December 31, 2010, deferred tax assets for net operating loss and tax credit carry-forwards of $152.8 million were reduced by a valuation allowance of $103.4 million. These deferred tax assets relate principally to net operating loss carry-forwards in foreign subsidiaries in France, Italy, Germany, Brazil, China, Australia and Spain. They also relate to Special Economic Zone Credits in Poland, U.S foreign tax credits and state tax credits. Some of these can be utilized indefinitely, while others expire from 2011 through 2030. We intend to maintain these allowances until it is more likely than not that the deferred tax assets will be realized.
In addition, the calculation of our tax benefits and liabilities includes uncertainties in the application of complex tax regulations in a multitude of jurisdictions across our global operations. We recognize tax benefits and liabilities based on our estimate of whether, and the extent to which additional taxes will be due. We adjust these liabilities based on changing facts and circumstances; however, due to the complexity of some of these uncertainties and the impact of any tax audits, the ultimate resolutions may be materially different from our estimated liabilities. For further information, related to income taxes, see Note 11. Income Taxes to the consolidated financial statements.
Pensions and Postretirement Benefits Other Than Pensions. Included in our results of operations are significant pension and postretirement benefit costs, which are measured using actuarial valuations. Inherent in these valuations are key assumptions, including assumptions about discount rates and expected returns on plan assets. These assumptions are updated at the beginning of each fiscal year. We are required to consider current market conditions, including changes in interest rates, in making these assumptions. Changes in pension and postretirement benefit costs may occur in the future due to changes in these assumptions. Our net pension and postretirement benefit costs were approximately $1.7 million and $3.5 million, respectively, for the seven months ended December 31, 2010 and $5.1 million and $1.0 million respectively, for the five months ended May 31, 2010.
To develop the discount rate for each plan, the expected cash flows underlying the plans benefit obligations were discounted using the December 31, 2010 Towers Watson RateLink Pension Index to determine a single equivalent rate. To develop our expected return on plan assets, we considered historical long-term asset return experience, the expected investment portfolio mix of plan assets and an estimate of long-term investment returns. To develop our expected portfolio mix of plan assets, we considered the duration of the plan liabilities and gave more weight to equity positions, including both public and private equity investments, than to fixed-income securities. Holding all other assumptions constant, a 1% increase or decrease in the discount rate would have decreased or increased the fiscal 2011 net periodic benefit cost expense by approximately $1.4 million or $0.6 million, respectively. Likewise, a 1% increase or decrease in the expected return on plan assets would have decreased or increased the fiscal 2011 net periodic benefit cost by approximately $2.7 million. Decreasing or increasing the discount rate by 1% would have increased or decreased the projected benefit obligations by approximately $47.7 million or $57.4 million, respectively. Aggregate pension net periodic benefit cost is forecasted to be approximately $4.1 million in 2011.
The rate of increase in medical costs assumed for the next five years was held constant with prior years to reflect both actual experience and projected expectations. The health care cost trend rate assumption has a significant effect on the amounts reported. Only certain employees hired are eligible to participate in our subsidized postretirement plan. A 1% change in the assumed health care cost trend rate would have increased or decreased the fiscal 2011 service and interest cost components by $0.2 million, and the projected benefit obligations would have increased or decreased by $3.6 million or $2.9 million, respectively. Aggregate other postretirement net periodic benefit cost is forecasted to be approximately $5.8 million in 2011.
The general funding policy is to contribute amounts deductible for U.S. federal income tax purposes or amounts required by local statute.
Derivative Financial Instruments. Derivative financial instruments are utilized by us to reduce foreign currency exchange and interest rate risk. We have established policies and procedures for risk assessment
56
including the assessment of counterparty credit risk and the approval, reporting, and monitoring of derivative financial instrument activities. On the date the derivative is established, we designate the derivative as either a fair value hedge, a cash flow hedge, or a net investment hedge in accordance with its established policy. We do not enter into financial instruments for trading or speculative purposes.
By using derivative instruments to hedge exposures to changes in commodity prices and interest rates, we expose ourselves to credit risk. Credit risk is the failure of the counterparty to perform under the terms of the derivative contract. When the fair value of a derivative contract is positive, the counterparty owes us, which creates credit risk for us. When the fair value of a derivative contract is negative, we owe the counterparty and we do not possess credit risk. To mitigate credit risk, it is our policy to execute such instruments with creditworthy banks and not enter into derivatives for speculative purposes.
Use of Estimates. The preparation of the consolidated financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities as of the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period. During 2010, there were no material changes in the methods or policies used to establish estimates and assumptions. Generally, matters subject to estimation and judgment include amounts related to accounts receivable realization, inventory obsolescence, asset impairments, useful lives of intangible and fixed assets, unsettled pricing discussions with customers and suppliers, restructuring accruals, deferred tax asset valuation allowances and income taxes, pension and other post retirement benefit plan assumptions, accruals related to litigation, warranty and environmental remediation costs and self-insurance accruals. Actual results may differ from estimates provided.
Fair Value Measurements. We measure certain assets and liabilities at fair value on a non-recurring basis using unobservable inputs (Level 3 input based on the U.S. GAAP fair value hierarchy). For further information on these fair value measurements, see Goodwill, Long-Lived Assets, Restructuring-Related Reserves, and Derivative Financial Instruments above.
Recent Accounting Pronouncements
See Note 2. Significant Accounting Policies, to the consolidated financial statements.
Item 7A. | Quantitative and Qualitative Disclosures About Market Risk |
We are exposed to fluctuations in interest rates, currency exchange rates and commodity prices. Prior to filing our bankruptcy filing under Chapter 11we entered into derivative financial instruments to monitor our exposure to these risks, but as a result of the bankruptcy filing all but one of these instruments were dedesignated. We actively monitor our exposure to risk from changes in foreign currency exchange rates and interest rates through the use of derivative financial instruments in accordance with managements guidelines. We do not enter into derivative instruments for trading purposes. See Item 7. Managements Discussion and Analysis of Financial Condition and Results of OperationsCritical Accounting PoliciesDerivative Financial Instruments and Item 8. Financial Statements and Supplementary Data, especially Note 21. Fair Value of Financial Instruments to the consolidated financial statements.
Foreign Currency Exchange Rate Risk. We use forward foreign exchange contracts to reduce the effect of fluctuations in foreign exchange rates on a portion of forecasted material purchases and operating expenses. As of December 31, 2010 there were no forward foreign exchange contracts outstanding.
In addition to transactional exposures, our operating results are impacted by the translation of our foreign operating income into U.S. dollars (translation exposure). In 2010, net sales outside of the United States accounted for 73% of our consolidated net sales, although certain non-U.S. sales are U.S. dollar denominated. We do not enter into foreign exchange contracts to mitigate this exposure.
57
Interest Rates. Prior to our bankruptcy filing under Chapter 11, our exposure to variable interest rates on outstanding variable rate debt instruments was partially managed by the use of interest rate swap contracts. These contracts converted certain variable rate debt obligations to fixed rate. These contracts were accounted for as cash flow hedges. At December 31, 2010 we had one interest rate swap contract outstanding with $6.6 million of notional amount pertaining to EURO denominated debt fixed at 4.14%.
Commodity Prices. We have commodity price risk with respect to purchases of certain raw materials, including natural gas and carbon black. Raw material, energy and commodity costs have been extremely volatile over the past several years. Prior to our bankruptcy filing under Chapter 11, we used derivative instruments to reduce our exposure to fluctuations in certain commodity prices. As of December 31, 2010, there were no commodity contracts outstanding. We will continue to evaluate, and may use, derivative financial instruments to manage our exposure to higher raw material, energy and commodity prices in the future.
58
Item 8. | Financial Statements and Supplementary Data |
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
Annual Financial Statements
Report of Ernst & Young LLP, Independent Registered Public Accounting Firm |
60 | |||
61 | ||||
62 | ||||
Consolidated balance sheets as of December 31, 2009 and December 31, 2010 |
63 | |||
64 | ||||
65 | ||||
66 | ||||
122 |
59
Report of Independent Registered Public Accounting Firm
The Board of Directors and Shareholders of Cooper-Standard Holdings Inc.
We have audited the accompanying consolidated balance sheets of Cooper-Standard Holdings Inc. as of December 31, 2010 (Successor) and December 31, 2009 (Predecessor), and the related consolidated statements of operations, changes in equity (deficit) and cash flows for the period from June 1, 2010 to December 31, 2010 (Successor), the period from January 1, 2010 to May 31, 2010, and the years ended December 31, 2009 and 2008 (Predecessor). Our audits also included the financial statement schedule included in Item 8. These financial statements and schedule are the responsibility of the Companys management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of Cooper-Standard Holdings Inc. as of December 31, 2010 (Successor) and December 31, 2009 (Predecessor), and the related consolidated statements of operations, changes in equity (deficit) and cash flows for the period from June 1, 2010 to December 31, 2010 (Successor), the period from January 1, 2010 to May 31, 2010, and the years ended December 31, 2009 and 2008 (Predecessor), in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.
As discussed in Notes 1, 3 and 4 to the consolidated financial statements, on May 12, 2010, the United States Bankruptcy Court for the District of Delaware entered an order confirming the Plan of Reorganization, which became effective on May 27, 2010. Accordingly, the accompanying consolidated financial statements have been prepared in conformity with FASB Accounting Standards CodificationTM 852, Reorganizations, for the Successor as a new entity with assets, liabilities and a capital structure having carrying values that are not comparable to prior periods.
As discussed in Notes 9 and 10 to the consolidated financial statements, in 2008, the Predecessor changed its method of accounting for pension and other postretirement benefit plans, respectively.
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Cooper-Standard Holdings Inc.s internal control over financial reporting as of December 31, 2010, based on criteria established in Internal ControlIntegrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission, and our report dated March 21, 2011, expressed an unqualified opinion thereon.
/s/ Ernst & Young LLP
Detroit, Michigan
March 21, 2011
60
Report of Independent Registered Public Accounting Firm on
Internal Control over Financial Reporting
The Board of Directors and Shareholders of Cooper-Standard Holdings Inc.
We have audited Cooper-Standard Holdings Inc.s internal control over financial reporting as of December 31, 2010, based on criteria established in Internal ControlIntegrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). Cooper-Standard Holdings Inc.s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in Managements Annual Report on Internal Control Over Financial Reporting included in Item 9A. Our responsibility is to express an opinion on the Companys internal control over financial reporting based on our audit.
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
A companys internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with U.S. generally accepted accounting principles. A companys internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit the preparation of financial statements in accordance with U.S. generally accepted accounting principles and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the companys assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions or that the degree of compliance with the policies or procedures may deteriorate.
In our opinion, Cooper-Standard Holdings Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2010, based on the COSO criteria.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the 2010 consolidated financial statements of Cooper-Standard Holdings Inc., and our report dated March 21, 2011, expressed an unqualified opinion thereon.
/s/ Ernst & Young LLP
Detroit, Michigan
March 21, 2011
61
CONSOLIDATED STATEMENTS OF OPERATIONS
(Dollar amounts in thousands except per share amounts)
Predecessor | Successor | |||||||||||||||
Year
Ended December 31, 2008 |
Year
Ended December 31, 2009 |
Five Months Ended May 31, 2010 |
Seven Months Ended December 31, 2010 |
|||||||||||||
Sales |
$ | 2,594,577 | $ | 1,945,259 | $ | 1,009,128 | $ | 1,405,019 | ||||||||
Cost of products sold |
2,260,063 | 1,678,953 | 832,201 | 1,172,350 | ||||||||||||
Gross profit |
334,514 | 266,306 | 176,927 | 232,669 | ||||||||||||
Selling, administration & engineering expenses |
231,709 | 199,552 | 92,166 | 159,573 | ||||||||||||
Amortization of intangibles |
30,996 | 14,976 | 319 | 8,982 | ||||||||||||
Impairment charges |
33,369 | 363,496 | | | ||||||||||||
Restructuring |
38,300 | 32,411 | 5,893 | 488 | ||||||||||||
Operating profit (loss) |
140 | (344,129 | ) | 78,549 | 63,626 | |||||||||||
Interest expense, net of interest income |
(92,894 | ) | (64,333 | ) | (44,505 | ) | (25,017 | ) | ||||||||
Equity earnings |
897 | 4,036 | 3,613 | 3,397 | ||||||||||||
Reorganization items and fresh-start accounting adjustments, net |
| (17,367 | ) | 660,048 | | |||||||||||
Other income (expense), net |
(1,368 | ) | 9,919 | (21,156 | ) | 4,214 | ||||||||||
Income (loss) before income taxes |
(93,225 | ) | (411,874 | ) | 676,549 | 46,220 | ||||||||||
Provision (benefit) for income tax expense |
29,295 | (55,686 | ) | 39,940 | 5,095 | |||||||||||
Consolidated net income (loss) |
(122,520 | ) | (356,188 | ) | 636,609 | 41,125 | ||||||||||
Add: Net (income) loss attributed to noncontrolling interests |
1,069 | 126 | (322 | ) | (549 | ) | ||||||||||
Net income (loss) attributable to Cooper-Standard Holdings Inc. |
$ | (121,451 | ) | $ | (356,062 | ) | $ | 636,287 | $ | 40,576 | ||||||
Net income available to Cooper-Standard Holdings Inc. common stockholders |
$ | 28,723 | ||||||||||||||
Basic net income per share attributable to Cooper-Standard Holdings Inc. |
$ | 1.64 | ||||||||||||||
Diluted net income per share attributable to Cooper-Standard Holdings Inc. |
$ | 1.55 | ||||||||||||||
The accompanying notes are an integral part of these consolidated financial statements.
62
CONSOLIDATED BALANCE SHEETS
December 31, 2009 and 2010
(Dollar amounts in thousands except share amounts)
Predecessor | Successor | |||||||
December 31, 2009 |
December 31, 2010 |
|||||||
Assets |
||||||||
Current assets: |
||||||||
Cash and cash equivalents |
$ | 380,254 | $ | 294,450 | ||||
Accounts receivable, net |
355,543 | 380,915 | ||||||
Inventories, net |
111,575 | 122,043 | ||||||
Prepaid expenses |
22,153 | 20,056 | ||||||
Other |
76,454 | 40,857 | ||||||
Total current assets |
945,979 | 858,321 | ||||||
Property, plant and equipment, net |
586,179 | 589,504 | ||||||
Goodwill |
87,728 | 137,000 | ||||||
Intangibles, net |
10,549 | 149,642 | ||||||
Other assets |
106,972 | 119,309 | ||||||
$ | 1,737,407 | $ | 1,853,776 | |||||
Liabilities and Equity (Deficit) |
||||||||
Current liabilities: |
||||||||
Debt payable within one year |
$ | 18,204 | $ | 19,965 | ||||
Debtor-in-possession financing |
175,000 | | ||||||
Accounts payable |
166,346 | 176,001 | ||||||
Payroll liabilities |
71,523 | 98,722 | ||||||
Accrued liabilities |
87,073 | 113,831 | ||||||
Total current liabilities |
518,146 | 408,519 | ||||||
Long-term debt |
11,059 | 456,758 | ||||||
Pension benefits |
148,936 | 164,595 | ||||||
Postretirement benefits other than pensions |
76,261 | 80,053 | ||||||
Deferred tax liabilities |
7,875 | 18,337 | ||||||
Other |
19,727 | 32,122 | ||||||
Liabilities subject to compromise |
1,261,903 | | ||||||
7% Cumulative participating convertible preferred stock, $0.001 par value, 10,000,000 shares authorized at December 31, 2010, 1,052,444 shares issued and outstanding at December 31, 2010 |
| 130,339 | ||||||
Equity (deficit): |
||||||||
Predecessor common stock, $0.01 par value, 4,000,000 shares authorized at December 31, 2009, 3,482,612 shares issued and outstanding at December 31, 2009 |
35 | | ||||||
Common stock, $0.001 par value, 190,000,000 shares authorized at December 31, 2010, 18,376,112 shares issued and outstanding at December 31, 2010 |
| 17 | ||||||
Additional paid-in capital |
356,316 | 478,706 | ||||||
Accumulated retained earnings (deficit) |
(636,278 | ) | 35,842 | |||||
Accumulated other comprehensive income (loss) |
(31,037 | ) | 45,881 | |||||
Total Cooper-Standard Holdings Inc. equity (deficit) |
(310,964 | ) | 560,446 | |||||
Noncontrolling interests |
4,464 | 2,607 | ||||||
Total equity (deficit) |
(306,500 | ) | 563,053 | |||||
Total liabilities and equity (deficit) |
$ | 1,737,407 | $ | 1,853,776 | ||||
The accompanying notes are an integral part of these consolidated financial statements.
63
CONSOLIDATED STATEMENTS OF CHANGES IN EQUITY (DEFICIT)
(Dollar amounts in thousands except share amounts)
Common Shares |
Common Stock |
Additional Paid-In Capital |
Retained Earnings (Deficit) |
Accumulated Other Comprehensive Income (Loss) |
Cooper-Standard Holdings Inc. Equity (Deficit) |
Non-Controlling Interest |
Total Equity (Deficit) |
|||||||||||||||||||||||||
Balance at December 31, 2007Predecessor |
3,483,600 | $ | 35 | $ | 354,874 | $ | (155,339 | ) | $ | 68,988 | $ | 268,558 | $ | 8,243 | $ | 276,801 | ||||||||||||||||
Adoption of ASC 715, measurement change |
(3,426 | ) | (3,426 | ) | (3,426 | ) | ||||||||||||||||||||||||||
Transaction with affiliate |
(1,741 | ) | (1,741 | ) | ||||||||||||||||||||||||||||
Dividends paid to noncontrolling interest |
(662 | ) | (662 | ) | ||||||||||||||||||||||||||||
Repurchase of common stock |
(4,500 | ) | (540 | ) | (540 | ) | (540 | ) | ||||||||||||||||||||||||
Stock-based compensation |
560 | 560 | 560 | |||||||||||||||||||||||||||||
Comprehensive income (loss): |
||||||||||||||||||||||||||||||||
Net loss for 2008 |
(121,451 | ) | (121,451 | ) | (1,069 | ) | (122,520 | ) | ||||||||||||||||||||||||
Other comprehensive loss: |
||||||||||||||||||||||||||||||||
Benefit plan liability, net of ($1,097) tax effect |
(53,614 | ) | (53,614 | ) | (53,614 | ) | ||||||||||||||||||||||||||
Currency translation adjustment |
(58,929 | ) | (58,929 | ) | (286 | ) | (59,215 | ) | ||||||||||||||||||||||||
Fair value change of derivatives, net of ($44) tax effect |
(15,981 | ) | (15,981 | ) | (15,981 | ) | ||||||||||||||||||||||||||
Comprehensive loss |
(249,975 | ) | (1,355 | ) | (251,330 | ) | ||||||||||||||||||||||||||
Balance at December 31, 2008Predecessor |
3,479,100 | 35 | 354,894 | (280,216 | ) | (59,536 | ) | 15,177 | 4,485 | 19,662 | ||||||||||||||||||||||
Issuance of common stock |
3,512 | 88 | 88 | 88 | ||||||||||||||||||||||||||||
Stock-based compensation |
1,334 | 1,334 | 1,334 | |||||||||||||||||||||||||||||
Comprehensive income (loss): |
||||||||||||||||||||||||||||||||
Net loss for 2009 |
(356,062 | ) | (356,062 | ) | (126 | ) | (356,188 | ) | ||||||||||||||||||||||||
Other comprehensive income (loss): |
||||||||||||||||||||||||||||||||
Benefit plan liability, net of $1,120 tax effect |
(3,499 | ) | (3,499 | ) | (3,499 | ) | ||||||||||||||||||||||||||
Currency translation adjustment |
25,898 | 25,898 | 105 | 26,003 | ||||||||||||||||||||||||||||
Fair value change of derivatives, net of ($3,843) tax effect |
6,100 | 6,100 | 6,100 | |||||||||||||||||||||||||||||
Comprehensive loss |
(327,563 | ) | (21 | ) | (327,584 | ) | ||||||||||||||||||||||||||
Balance at December 31, 2009Predecessor |
3,482,612 | 35 | 356,316 | (636,278 | ) | (31,037 | ) | (310,964 | ) | 4,464 | (306,500 | ) | ||||||||||||||||||||
Issuance of common stock |
| |||||||||||||||||||||||||||||||
Stock-based compensation |
244 | 244 | 244 | |||||||||||||||||||||||||||||
Deconsolidation of non-controlling interest and other |
(4,622 | ) | (4,622 | ) | ||||||||||||||||||||||||||||
Comprehensive income (loss): |
||||||||||||||||||||||||||||||||
Net income five months ended May 31, 2010 |
636,287 | 636,287 | 322 | 636,609 | ||||||||||||||||||||||||||||
Other comprehensive income (loss): |
||||||||||||||||||||||||||||||||
Benefit plan liability, net of $34 tax effect |
126 | 126 | 126 | |||||||||||||||||||||||||||||
Currency translation adjustment |
(31,091 | ) | (31,091 | ) | 17 | (31,074 | ) | |||||||||||||||||||||||||
Fair value change of derivatives, net of $194 tax effect |
(81 | ) | (81 | ) | (81 | ) | ||||||||||||||||||||||||||
Comprehensive income |
605,241 | 339 | 605,580 | |||||||||||||||||||||||||||||
Reorganization and fresh start accounting adjustments |
(3,482,612 | ) | (35 | ) | (356,560 | ) | (9 | ) | 62,083 | (294,521 | ) | 2,182 | (292,339 | ) | ||||||||||||||||||
Balance at May 31, 2010Predecessor |
| | | | | | 2,363 | 2,363 | ||||||||||||||||||||||||
Issuance of common stock |
17,489,693 | 17 | 473,275 | 473,292 | 473,292 | |||||||||||||||||||||||||||
Initial grant awards (Note 19) |
859,971 | |||||||||||||||||||||||||||||||
Balance at May 31, 2010Successor |
18,349,664 | 17 | 473,275 | | | 473,292 | 2,363 | 475,655 | ||||||||||||||||||||||||
Stock-based compensation |
5,431 | 5,431 | 5,431 | |||||||||||||||||||||||||||||
Initial grant awards (Note 19) |
26,448 | |||||||||||||||||||||||||||||||
Dividends paid |
(4,734 | ) | (4,734 | ) | (4,734 | ) | ||||||||||||||||||||||||||
Comprehensive income |
||||||||||||||||||||||||||||||||
Net income seven months ended December 31, 2010 |
40,576 | 40,576 | 549 | 41,125 | ||||||||||||||||||||||||||||
Other |
(334 | ) | (334 | ) | ||||||||||||||||||||||||||||
Other comprehensive income: |
||||||||||||||||||||||||||||||||
Benefit plan liability, net of ($489) tax effect |
4,962 | 4,962 | 4,962 | |||||||||||||||||||||||||||||
Currency translation adjustment |
40,828 | 40,828 | 29 | 40,857 | ||||||||||||||||||||||||||||
Fair value change of derivatives, net of ($36) tax effect |
91 | 91 | 91 | |||||||||||||||||||||||||||||
Comprehensive income |
86,457 | 244 | 86,701 | |||||||||||||||||||||||||||||
Balance at December 31, 2010Successor |
18,376,112 | $ | 17 | $ | 478,706 | $ | 35,842 | $ | 45,881 | $ | 560,446 | $ | 2,607 | $ | 563,053 | |||||||||||||||||
The accompanying notes are an integral part of these consolidated financial statements.
64
CONSOLIDATED STATEMENTS OF CASH FLOWS
(Dollar amounts in thousands)
Predecessor | Successor | |||||||||||||||
Year
Ended December 31, 2008 |
Year
Ended December 31, 2009 |
Five Months Ended May 31, 2010 |
Seven Months
Ended December 31, 2010 |
|||||||||||||
Operating Activities: |
||||||||||||||||
Consolidated net income (loss) |
$ | (122,520 | ) | $ | (356,188 | ) | $ | 636,609 | $ | 41,125 | ||||||
Adjustments to reconcile consolidated net income (loss) to net cash provided by (used in) operating activities: |
||||||||||||||||
Depreciation |
109,109 | 98,801 | 35,333 | 57,687 | ||||||||||||
Amortization of intangibles |
30,996 | 14,976 | 319 | 8,982 | ||||||||||||
Impairment charges |
33,369 | 363,496 | | | ||||||||||||
Reorganization items and fresh-start adjustments |
| 17,367 | (660,048 | ) | | |||||||||||
Non-cash restructuring charges |
9,029 | 1,268 | 46 | 468 | ||||||||||||
Gain on bond repurchase |
(1,696 | ) | (9,096 | ) | | | ||||||||||
Amortization of debt issuance cost |
4,866 | 10,286 | 11,505 | 714 | ||||||||||||
Stock-based compensation expense |
1,264 | 1,361 | 244 | 6,351 | ||||||||||||
Deferred income taxes |
12,810 | (41,316 | ) | 31,049 | (7,760 | ) | ||||||||||
Changes in operating assets and liabilities: |
||||||||||||||||
Accounts receivable |
163,279 | 14,886 | (33,553 | ) | 47,665 | |||||||||||
Inventories |
28,062 | 9,914 | (11,824 | ) | 7,663 | |||||||||||
Prepaid expenses |
(2,880 | ) | (974 | ) | (6,412 | ) | 6,904 | |||||||||
Accounts payable |
(86,316 | ) | 50,081 | (59,180 | ) | (9,234 | ) | |||||||||
Accrued liabilities |
(28,148 | ) | 27,117 | 29,561 | 20,483 | |||||||||||
Other |
(14,731 | ) | (71,997 | ) | (49,044 | ) | (10,452 | ) | ||||||||
Net cash provided by (used in) operating activities |
136,493 | 129,982 | (75,395 | ) | 170,596 | |||||||||||
Investing activities: |
||||||||||||||||
Property, plant, and equipment |
(92,125 | ) | (46,113 | ) | (22,935 | ) | (54,441 | ) | ||||||||
Acquisition of business, net of cash acquired |
4,937 | | | | ||||||||||||
Gross proceeds from sale-leaseback transaction |
8,556 | | | | ||||||||||||
Proceeds from sale of fixed assets |
4,775 | 642 | 3,851 | 2,603 | ||||||||||||
Net cash used in investing activities |
(73,857 | ) | (45,471 | ) | (19,084 | ) | (51,838 | ) | ||||||||
Financing activities: |
||||||||||||||||
Proceeds from issuance of debtor-in-possession financing |
| 175,000 | | | ||||||||||||
Payments on debtor-in-possession financing |
| (313 | ) | (175,000 | ) | | ||||||||||
Proceeds from issuance of long-term debt |
| | 450,000 | | ||||||||||||
Increase (decrease) in short term debt, net |
37,004 | 24,104 | (2,069 | ) | 3,879 | |||||||||||
Cash dividends paid |
| | | (3,163 | ) | |||||||||||
Principal payments on long-term debt |
(16,528 | ) | (11,646 | ) | (709,574 | ) | (2,123 | ) | ||||||||
Issuance of common stockPredecessor |
| 88 | | | ||||||||||||
Proceeds from issuance of preferred and common stock |
| | 355,000 | | ||||||||||||
Debt issuance costPredecessor |
(561 | ) | (20,592 | ) | | | ||||||||||
Debt issuance cost and back stop fees |
| | (30,991 | ) | | |||||||||||
Repurchase of common stock |
(540 | ) | | | | |||||||||||
Repurchase of bonds |
(5,306 | ) | (737 | ) | | | ||||||||||
Other |
| 171 | | 48 | ||||||||||||
Net cash provided by (used in) financing activities |
14,069 | 166,075 | (112,634 | ) | (1,359 | ) | ||||||||||
Effects of exchange rate changes on cash |
(6,061 | ) | 18,147 | 5,528 | (1,618 | ) | ||||||||||
Changes in cash and cash equivalents |
70,644 | 268,733 | (201,585 | ) | 115,781 | |||||||||||
Cash and cash equivalents at beginning of period |
40,877 | 111,521 | 380,254 | 178,669 | ||||||||||||
Cash and cash equivalents at end of period |
$ | 111,521 | $ | 380,254 | $ | 178,669 | $ | 294,450 | ||||||||
The accompanying notes are an integral part of these consolidated financial statements.
65
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(Dollar amounts in thousands except per share and share amounts)
1. Description of Business
Description of business
Cooper-Standard Holdings Inc. (the Company, we or us), through its wholly-owned subsidiary CSA U.S., is a leading manufacturer of body sealing, AVS and fluid handling components, systems, subsystems and modules, primarily for use in passenger vehicles and light trucks, that are manufactured by global automotive OEMs and replacement markets. The Company conducts substantially all of its activities through its subsidiaries.
The Company believes that they are the largest global producer of body sealing systems, the second largest global producer of the types of fluid handling products that they manufacture and one of the largest North American producers of AVS business. They design and manufacture their products in each major region of the world through a disciplined and sustained approach to engineering and operational excellence. The Company operates in 66 manufacturing locations and nine design, engineering, and administrative locations in 18 countries around the world.
On May 27, 2010, the Company and certain of its U.S. and Canadian subsidiaries emerged from under Chapter 11 of the Bankruptcy Code. In accordance with the provisions of Financial Accounting Standards Board (FASB) ASC 852, Reorganizations, the Company adopted fresh-start accounting upon its emergence from Chapter 11 bankruptcy proceedings and became a new entity for financial reporting purposes as of June 1, 2010. Accordingly, the consolidated financial statements for the reporting entity subsequent to emergence from Chapter 11 bankruptcy proceedings (the Successor) are not comparable to the consolidated financial statements for the reporting entity prior to emergence from Chapter 11 bankruptcy proceedings (the Predecessor).
2. Significant Accounting Policies
Principles of combination and consolidation The consolidated financial statements include the accounts of the Company and the wholly owned and less than wholly owned subsidiaries controlled by the Company. All material intercompany accounts and transactions have been eliminated. Acquired businesses are included in the consolidated financial statements from the dates of acquisition.
The equity method of accounting is followed for investments in which the Company does not have control, but does have the ability to exercise significant influence over operating and financial policies. Generally this occurs when ownership is between 20 to 50 percent. The cost method is followed in those situations where the Companys ownership is less than 20 percent and the Company does not have the ability to exercise significant influence. The investment totals at December 31, 2010 reflect the adoption of fresh-start accounting, see Note 4. Fresh-Start Accounting to the consolidated financial statements.
The Companys investment in NISCO, a 50 percent owned joint venture in the United States, is accounted for under the equity method. This investment totaled $13,400 and $22,886 at December 31, 2009 and 2010, respectively, and is included in other assets in the accompanying consolidated balance sheets. In 2010, the Company received from NISCO a dividend of $2,000 all of which was related to earnings.
The Companys investment in Guyoung, a 20 percent owned joint venture in Korea, is accounted for under the equity method. This investment totaled $1,370 and $1,633 at December 31, 2009 and 2010, respectively, and is included in other assets in the accompanying consolidated balance sheets.
66
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
(Dollar amounts in thousands except per share and share amounts)
The Companys investment in HASCO, a 47.5 percent owned joint venture in China, is accounted for under the equity method. This investment totaled $20,994 and $24,344 at December 31, 2009 and 2010, respectively, and is included in other assets in the accompanying consolidated balance sheets. In 2010, the Company received from HASCO a dividend of $1,784 all of which was related to earnings.
Foreign currency The financial statements of foreign subsidiaries are translated to U.S. dollars at the end-of-period exchange rates for assets and liabilities and at a weighted average exchange rate for each period for revenues and expenses. Translation adjustments for those subsidiaries whose local currency is their functional currency are recorded as a component of accumulated other comprehensive income (loss) in stockholders equity. Transaction related gains and losses arising from fluctuations in currency exchange rates on transactions denominated in currencies other that the functional currency are recognized in earnings as incurred, except for those intercompany balances which are designated as long-term.
Cash and cash equivalents The Company considers highly liquid investments with an original maturity of three months or less to be cash equivalents.
Accounts receivable The Company records trade accounts receivable when revenue is recorded in accordance with its revenue recognition policy and relieves accounts receivable when payments are received from customers. Generally the Company does not require collateral for its accounts receivable.
Allowance for doubtful accounts The allowance for doubtful accounts is established through charges to the provision for bad debts. The Company evaluates the adequacy of the allowance for doubtful accounts on a periodic basis. The evaluation includes historical trends in collections and write-offs, managements judgment of the probability of collecting accounts and managements evaluation of business risk. This evaluation is inherently subjective, as it requires estimates that are susceptible to revision as more information becomes available. The allowance for doubtful accounts was $5,871 and $993 at December 31, 2009 and 2010, respectively.
Advertising expense Expenses incurred for advertising are generally expensed when incurred. Advertising expense was $1,080 for 2008, $345 for 2009, $258 for the five months ended May 31, 2010 and $426 for the seven months ended December 31, 2010.
Inventories Inventories are valued at lower of cost or market. Cost is determined using the first-in, first-out method. Finished goods and work-in-process inventories include material, labor and manufacturing overhead costs. The Company records inventory reserves for inventory in excess of production and/or forecasted requirements and for obsolete inventory in production. As of December 31, 2009 and 2010, inventories are reflected net of reserves of $17,158 and $2,504, respectively.
Predecessor | Successor | |||||||
December 31, 2009 |
December 31, 2010 |
|||||||
Finished goods |
$ | 27,826 | $ | 32,690 | ||||
Work in process |
25,616 | 27,223 | ||||||
Raw materials and supplies |
58,133 | 62,130 | ||||||
$ | 111,575 | $ | 122,043 | |||||
In connection with the adoption of fresh-start accounting, an $8,136 fair value write-up of inventory was recorded at May 31, 2010 in the Predecessor. Such inventory was liquidated as of December 31, 2010 by the Successor and recorded as an increase to cost of product sold.
67
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
(Dollar amounts in thousands except per share and share amounts)
Derivative financial instruments Derivative financial instruments are utilized by the Company to reduce foreign currency exchange, interest rate, and commodity price risks. The Company has established policies and procedures for risk assessment and the approval, reporting, and monitoring of derivative financial instrument activities. On the date the derivative is established, the Company designates the derivative as either a fair value hedge, a cash flow hedge, or a net investment hedge in accordance with its established policy. The Company does not enter into financial instruments for trading or speculative purposes.
Income taxes Income tax expense in the consolidated and combined statements of operations is accounted for in accordance with ASC Topic 740, Accounting for Income Taxes, which requires the recognition of deferred income taxes using the liability method.
Deferred tax assets or liabilities are determined based on differences between financial reporting and tax bases of assets and liabilities and are measured using enacted tax laws and rates. A valuation allowance is provided on deferred tax assets if the Company determines that it is more likely than not that the asset will not be realized.
Long-lived assets Property, plant, and equipment are recorded at cost and depreciated using primarily the straight-line method over their estimated useful lives. Leasehold improvements are amortized over the expected life of the asset or term of the lease, whichever is shorter. Intangibles with finite lives, which include technology and customer relationships, are amortized over their estimated useful lives. The Company evaluates the recoverability of long-lived assets when events and circumstances indicate that the assets may be impaired and the undiscounted net cash flows estimated to be generated by those assets are less than their carrying value. If the net carrying value exceeds the fair value, an impairment loss exists and is calculated based on a discounted cash flow analysis or estimated salvage value. Discounted cash flows are estimated using internal budgets and assumptions regarding discount rates and other factors.
Pre-Production Costs Related to Long Term Supply Arrangements Costs for molds, dies, and other tools owned by the Company to produce products under long-term supply arrangements are recorded at cost in property, plant, and equipment and amortized over the lesser of three years or the term of the related supply agreement. The amounts capitalized were $9,324 and $5,813 at December 31, 2009 and 2010, respectively. The Company expenses all pre-production tooling costs related to customer-owned tools for which reimbursement is not contractually guaranteed by the customer. Reimbursable tooling costs included in other assets in the accompanying consolidated balance sheets was $2,561 and $8,537 at December 31, 2009 and 2010, respectively. Reimbursable tooling costs are recorded in accounts receivable in the accompanying consolidated balance sheets if considered a receivable in the next twelve months. At December 31, 2009 and 2010, $65,351 and $64,457, respectively, were included in accounts receivable for customer-owned tooling of which $40,510 and $38,829, respectively, was not yet invoiced to the customer.
Goodwill Goodwill is not amortized but is tested annually for impairment by reporting unit which is determined in accordance with ASC Topic 350 Intangibles-Goodwill and Other. The Company utilizes an income approach to estimate the fair value of each of its reporting units. The income approach is based on projected debt-free cash flow which is discounted to the present value using discount factors that consider the timing and risk of cash flows. The Company believes that this approach is appropriate because it provides a fair value estimate based upon the reporting units expected long-term operating cash flow performance. Fair value is estimated using recent automotive industry and specific platform production volume projections, which are based on both third-party and internally-developed forecasts, as well as commercial, wage and benefit, inflation and discount rate assumptions. Other significant assumptions include the weighted average cost of capital, terminal value growth rate, terminal value margin rates, future capital expenditures and changes in future working capital requirements. While there are inherent uncertainties related to the assumptions used and to managements application of these assumptions to this analysis, the Company believes that the income approach provides a
68
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
(Dollar amounts in thousands except per share and share amounts)
reasonable estimate of the fair value of its reporting units. The Company conducts its annual goodwill impairment analysis as of October 1st of each year. The 2010 annual goodwill impairment analysis resulted in no impairment.
Revenue Recognition and Sales Commitments The Company generally enters into agreements with their customers to produce products at the beginning of a vehicles life. Although such agreements do not generally provide for minimum quantities, once they enter into such agreements, fulfillment of their customers purchasing requirements can be their obligation for an extended period or the entire production life of the vehicle. These agreements generally may be terminated by their customer at any time. Historically, terminations of these agreements have been minimal. In certain limited instances, they may be committed under existing agreements to supply products to their customers at selling prices which are not sufficient to cover the direct cost to produce such products. In such situations, they recognize losses as they are incurred.
The Company receives blanket purchase orders from many of their customers on an annual basis. Generally, such purchase orders and related documents set forth the annual terms, including pricing, related to a particular vehicle model. Such purchase orders generally do not specify quantities. They recognize revenue based on the pricing terms included in their annual purchase orders as their products are shipped to their customers. As part of certain agreements, they are asked to provide their customers with annual cost reductions. They accrue for such amounts as a reduction of revenue as their products are shipped to their customers. In addition, they generally have ongoing adjustments to their pricing arrangements with their customers based on the related content and cost of their products. Such pricing accruals are adjusted as they are settled with their customers.
Amounts billed to customers related to shipping and handling are included in sales in their consolidated statements of operations. Shipping and handling costs are included in cost of sales in their consolidated statements of operations.
Research and development Costs are charged to selling, administration and engineering expense as incurred and totaled $81,942 for 2008, $62,880 for 2009, $29,130 for the five months ended May 31, 2010 and $39,662 for the seven months ended December 31, 2010.
Stock-based compensation The Company measures stock-based compensation expense at fair value in accordance with GAAP and recognizes such expenses over the vesting period of the stock-based employee awards. For further information related to the Companys stock-based compensation programs, see Note 19. Stock Based Compensation.
Use of estimates The preparation of financial statements in conformity with GAAP requires management to make estimates and assumptions that affect reported amounts of (1) revenues and expenses during the reporting period and (2) assets and liabilities, as well as disclosure of contingent assets and liabilities, at the date of the financial statements. Actual results could differ from those estimates.
Reclassifications Certain amounts in prior periods financial statements have been reclassified to conform to the presentation used in the 2010 Predecessor and Successor periods.
Recent accounting pronouncements
In December 2010, the FASB issued Accounting Standards Update (ASU) 2010-28, IntangiblesGoodwill and Other (Topic 350). This ASU modifies the first step of the goodwill impairment test to include reporting units with zero or negative carrying amounts. For these reporting units, the second step of the goodwill impairment test shall be performed to measure the amount of impairment loss, if any; when it is more likely than
69
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
(Dollar amounts in thousands except per share and share amounts)
not that a goodwill impairment exists. This ASU is effective for fiscal years and interim periods beginning after December 15, 2010. The Company has evaluated the ASU and does not believe it will have a material impact on the consolidated financial statements.
In December 2010, the FASB issued ASU 2010-29, Business Combinations (Topic 805). This ASU specifies that if a company presents comparative financial statements, the company should disclose revenue and earnings of the combined entity as though the business combination that occurred during the year had occurred as of the beginning of the comparable prior annual reporting period only. The ASU also expands the supplemental pro forma disclosures under Topic 805 to include a description of the nature and amount of material, nonrecurring pro forma adjustments directly attributable to the business combination included in the pro forma revenue and earnings. This ASU is effective prospectively for business combinations for which the acquisition date is on or after the beginning of the first annual reporting period beginning on or after December 15, 2010. Effective January 1, 2011, the Company adopted this ASU and will include all required disclosures in the notes to its consolidated financial statements, if applicable.
The FASB amended ASC 605, Revenue Recognition, with ASU 2009-13, Revenue Recognition (Topic 605)Multiple-Deliverable Revenue Arrangements. If a revenue arrangement has multiple deliverables, this update requires the allocation of revenue to the separate deliverables based on relative selling prices. In addition, this update requires additional ongoing disclosures about an entitys multiple-element revenue arrangements. The provisions of this update were effective January 1, 2011. The effects of adoption were not significant.
In January 2010, the FASB issued ASU 2010-06, Guidance Amending Fair Value Disclosures for Interim and Annual Reporting Periods Beginning After December 15, 2009. This guidance requires disclosures about transfers of financial instruments into and out of Level 1 and 2 designations and disclosures about purchases, sales, issuances and settlements of financial instruments with a Level 3 designation. The Company adopted this statement effective January 1, 2010. The adoption of ASU No. 2010-06 did not have a material impact on the Companys consolidated financial statements.
The FASB amended ASC 810, Consolidations, with ASU 2009-17, Improvements to Financial Reporting by Enterprises Involved with Variable Interest Entities. This update significantly changes the model for determining whether an entity is the primary beneficiary and should thus consolidate a variable interest entity. In addition, this update requires additional disclosures and an ongoing assessment of whether a variable interest entity should be consolidated. The provisions of this update were effective for annual reporting periods beginning after November 15, 2009. The effects of adoption were not significant.
3. Reorganization Under Chapter 11 of the Bankruptcy Code
Filing of Bankruptcy Cases
During the first half of 2009, the Company experienced a substantial decrease in revenues caused by the severe decline in worldwide automotive production that followed the global financial crisis that began in 2008. On August 3, 2009, the Company and each of its direct and indirect wholly-owned U.S. subsidiaries (collectively with the Company, the Debtors) filed voluntary petitions for relief under Chapter 11 in the United States Bankruptcy Court for the District of Delaware (the Bankruptcy Court) (Consolidated Case No. 09-12743(PJW)) (the Chapter 11 Cases). On August 4, 2009, the Companys Canadian subsidiary, Cooper-Standard Automotive Canada Limited, a corporation incorporated under the laws of Ontario (CSA Canada), commenced proceedings seeking relief from its creditors under Canadas Companies Creditors Arrangement Act (the Canadian Proceedings) in the Ontario Superior Court of Justice in Toronto, Canada (Commercial List) (the Canadian Court), court file no. 09-8307-00CL. The Companys subsidiaries and
70
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
(Dollar amounts in thousands except per share and share amounts)
operations outside of the United States and Canada were not subject to the requirements of the Bankruptcy Code. On March 26, 2010, the Debtors filed with the Bankruptcy Court their Second Amended Joint Chapter 11 Plan of Reorganization (as amended and supplemented, the Plan of Reorganization) and their First Amended Disclosure Statement (as amended and supplemented, the Disclosure Statement). On May 12, 2010, the Bankruptcy Court entered an order approving and confirming the Plan of Reorganization (the Confirmation Order). CSA Canadas plan of compromise or arrangement was sanctioned on April 16, 2010.
On May 27, 2010 (the Effective Date), the Debtors consummated the reorganization contemplated by the Plan of Reorganization and emerged from Chapter 11 bankruptcy proceedings.
Post-Emergence Capital Structure and Recent Events
Following the Effective Date, the Companys capital structure consisted of the following:
| Senior ABL Facility. A senior secured asset-based revolving credit facility in the aggregate principal amount of $125,000 (the Senior ABL Facility), which contains an uncommitted $25,000 accordion facility that will be available at the Companys request if the lenders at the time consent. |
|
8 1/2% Senior Notes due 2018. $450,000 of senior unsecured notes (the Senior Notes) that bear interest at 8 1/2% per annum and mature on May 1, 2018. |
| Common stock, 7% preferred stock and warrants. Equity securities comprised of (i) 17,489,693 shares of the Companys common stock, (ii) 1,000,000 shares of the Companys 7% cumulative participating convertible preferred stock (7% preferred stock), which are initially convertible into 4,290,788 shares of the Companys common stock, and (iii) 2,419,753 warrants (warrants) to purchase up to an aggregate of 2,419,753 shares of the Companys common stock. |
On the Effective Date, the Company issued to key employees of the Company, (i) 757,896 shares of common stock plus, subject to realized dilution on the warrants, an additional 104,075 shares of common stock as restricted stock, (ii) 41,664 shares of 7% preferred stock as restricted 7% preferred stock, and (iii) 702,509 options to purchase shares of common stock, plus, subject to realized dilution on the warrants, an additional 78,057 options to purchase shares of common stock. On the day after the Effective Date, the Company issued to certain of its directors and Oak Hill Advisors L.P. or its affiliates, 26,448 shares of common stock as restricted stock and 58,386 options to purchase shares of common stock. The Company also reserved 780,566 shares of common stock for future issuance to the Companys management. On July 19, 2010, the Company paid a dividend to holders of its outstanding 7% preferred stock in the form of 10,780 additional shares of 7% preferred stock.
For further information on the Senior ABL Facility and the Senior Notes, see Note 8. Debt. For further information on our common stock, 7% preferred stock and warrants, see Note 18. Capital Stock.
Satisfaction of Debtor-in-Possession Financing
In connection with the commencement of the Chapter 11 Cases and the Canadian Proceedings, the Company entered into debtor-in-possession financing arrangements. On the Effective Date, all remaining amounts outstanding under the Companys debtor-in-possession financing arrangement were repaid using proceeds of the Debtors exit financing. For additional information on these financing arrangements, see Note 8. Debt.
71
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
(Dollar amounts in thousands except per share and share amounts)
Cancellation of Certain Prepetition Obligations
Under the Plan of Reorganization, the Companys prepetition equity, debt and certain of its other obligations were cancelled and extinguished as follows:
| the Predecessors equity interests, including common stock and any options, warrants, calls, subscriptions or other similar rights or other agreements, commitments or outstanding securities obligations, were cancelled and extinguished, and no distributions were made to the Predecessors former equity holders; |
| the Predecessors prepetition debt securities were cancelled and the indentures governing such obligations were terminated (other than for the purposes of allowing holders of the notes to receive distributions under the Plan of Reorganization and allowing the trustees to exercise certain rights); and |
| the Predecessors prepetition credit agreement was cancelled and terminated, including all agreements related thereto (other than for the purposes of allowing creditors under that facility to receive distributions under the Plan of Reorganization and allowing the administrative agent to exercise certain rights). |
For further information regarding the resolution of certain of the Companys other prepetition liabilities in accordance with the Plan of Reorganization, see Note 4. Fresh-Start AccountingLiabilities Subject to Compromise.
4. Fresh-Start Accounting
As discussed in Note 3. Reorganization Under Chapter 11 of the Bankruptcy Code, the Debtors emerged from Chapter 11 bankruptcy proceedings on May 27, 2010. As a result, the Successor adopted fresh-start accounting as (i) the reorganization value of the Predecessors assets immediately prior to the confirmation of the Plan of Reorganization was less than the total of all post-petition liabilities and allowed claims and (ii) the holders of the Predecessors existing voting shares immediately prior to the confirmation of the Plan of Reorganization received less than 50% of the voting shares of the emerging entity. GAAP requires the adoption of fresh-start accounting as of the Plan of Reorganizations confirmation date, or as of a later date when all material conditions precedent to the Plan of Reorganization becoming effective are resolved, which occurred on May 27, 2010. The Company elected to adopt fresh-start accounting as of May 31, 2010 to coincide with the timing of its normal May accounting period close. There were no transactions that occurred from May 28, 2010 through May 31, 2010, that would materially impact the Companys consolidated financial position, results of operations or cash flows for the 2010 Successor or 2010 Predecessor periods.
Reorganization Value
The Bankruptcy Court confirmed the Plan of Reorganization, which included an enterprise value (or distributable value) of $1,025,000, assuming $50,000 of excess cash, as set forth in the Disclosure Statement. For purposes of the Plan of Reorganization and the Disclosure Statement, the Company and certain unsecured creditors agreed upon this value. This reorganization value was determined to be a fair and reasonable value and is within the range of values considered by the Bankruptcy Court as part of the confirmation process. The reorganization value reflects a number of factors and assumptions, including the Companys statements of operations and balance sheets, the Companys financial projections, the amount of cash to fund operations, current market conditions and a return to more normalized light vehicle production and sales volumes. The range of values considered by the Bankruptcy Court of $975,000 to $1,075,000 was determined using comparable public company trading multiples, precedent transactions analysis and discounted cash flow valuation methodologies.
72
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
(Dollar amounts in thousands except per share and share amounts)
The comparable public company analysis identified a group of comparable companies giving consideration to lines of business, size, geographic footprint and customer base. The analysis compared the public market implied enterprise value for each comparable public company to its projected earnings before interest, taxes, depreciation and amortization (EBITDA). The calculated range of multiples for the comparable companies was used to estimate a range which was applied to the Companys projected EBITDA to determine a range of enterprise values for the reorganized company or the reorganization value.
Precedent transactions analysis estimates the value of a company by examining public merger and acquisition transactions. An analysis of a companys transaction value as a multiple of various operating statistics provided industry-wide valuation multiples for companies in similar lines of business to the Debtors. Transaction multiples are calculated based on the purchase price (including any debt assumed) paid to acquire companies that are comparable to the Debtors. Prices paid as a multiple of revenue, earnings before interest and taxes and EBITDA were considered, which were then applied to the Debtors key operating statistics to estimate the enterprise value, or value to a potential strategic buyer.
The discounted cash flow analysis was based on the Companys projected financial information, which includes a variety of estimates and assumptions. While the Company considers such estimates and assumptions reasonable, they are inherently subject to uncertainties and to a wide variety of significant business, economic and competitive risks, many of which are beyond the Companys control and may not materialize. Changes in these estimates and assumptions may have had a significant effect on the determination of the Companys reorganization value. The discounted cash flow analysis was based on recent automotive industry and specific platform production volume projections developed by both third-party and internal forecasts, as well as commercial, wage and benefit, inflation and discount rate assumptions. Other significant assumptions include terminal value growth rate, terminal value margin rate, future capital expenditures and changes in working capital requirements.
Reorganization Adjustments
The consolidated financial information gives effect to the following reorganization adjustments, the Plan of Reorganization and the implementation of the transactions contemplated by the Plan of Reorganization. These adjustments give effect to the terms of the Plan of Reorganization and certain underlying assumptions, which include, but are not limited to, the below.
| The issuance of the Senior Notes, which resulted in cash proceeds of $450,000. |
| The issuance of 17.5 million shares of our common stock, including 8.6 million shares offered to holders of the Predecessors prepetition senior subordinated notes in connection with the rights offering conducted pursuant to the Plan of Reorganization (the Rights Offering), 2.6 million shares to certain of the Debtors creditors that agreed to backstop the Rights Offering (the Backstop Parties) pursuant to an equity commitment agreement (the Equity Commitment Agreement) and 6.3 million shares to certain holders of the Predecessors prepetition senior notes and prepetition senior subordinated notes. The Company also issued shares of 7% preferred stock convertible into 4.3 million shares of common stock pursuant to the Equity Commitment Agreement. The Company received cash proceeds of $355,000 in connection with the Rights Offering and Equity Commitment Agreement and also received the full and complete satisfaction, settlement and release of allowed prepetition senior note claims and allowed prepetition senior subordinated note claims for such shares. In addition, the Company also issued warrants to purchase 2.4 million shares of common stock. |
| The repayment of $175,000 of liabilities under the Debtors Debtor-in-Possession Credit Agreement (the DIP Credit Agreement). On the Effective Date, each holder of an allowed DIP claim received, in |
73
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
(Dollar amounts in thousands except per share and share amounts)
full and complete satisfaction, settlement and release of and in exchange for such allowed claim against the Debtors, an amount in cash equal to the allowed amount of such claim. |
| The repayment of the $639,600, including interest, outstanding under the Predecessors prepetition credit agreement in cash. |
| The repayment of the $105,200, including interest, outstanding of the Predecessors prepetition senior notes in cash. |
| The effects of the above reorganization adjustments resulted in a decrease in interest expense, including the amortization of debt issuance costs, resulting from a lower level of debt. |
Adoption of Fresh-Start Accounting
Fresh-start accounting results in a new basis of accounting and reflects the allocation of the Companys fair value to its underlying assets and liabilities. The Companys estimates of fair value included in the Successors financial statements represent the Companys best estimates based on independent appraisals and valuations. The Companys estimates of fair value are inherently subject to significant uncertainties and contingencies beyond the control of the Company. Accordingly, there can be no assurance that the estimates, assumptions, valuations and appraisals will be realized, and actual results could vary materially.
The Companys reorganization value was allocated to its assets in conformity with ASC 805, Business Combinations. The excess reorganization value over the fair value of tangible and identifiable intangible assets was recorded as goodwill. Liabilities existing as of the Effective Date, other than deferred taxes, were recorded at the present value of amounts expected to be paid using appropriate risk adjusted interest rates. Deferred taxes were determined in conformity with applicable income tax accounting standards. Predecessor accumulated depreciation, accumulated amortization, retained deficit, common stock and accumulated other comprehensive loss were eliminated.
The following Fresh-Start Consolidated Balance Sheet illustrates the financial effects on the Company of the implementation of the Plan of Reorganization and the adoption of fresh-start accounting. This Fresh-Start Consolidated Balance Sheet reflects the effects of the consummation of the transactions contemplated in the Plan of Reorganization, including settlement of various liabilities, issuance of certain securities, incurrence of new indebtedness, repayment of old indebtedness and other cash payments.
74
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
(Dollar amounts in thousands except per share and share amounts)
Predecessor May 31, 2010 |
Reorganization Adjustments(1) |
Fresh-start Adjustments(9) |
Successor May 31, 2010 |
|||||||||||||
Assets |
||||||||||||||||
Current assets: |
||||||||||||||||
Cash and cash equivalents |
$ | 200,311 | $ | (21,642 | )(2) | $ | | $ | 178,669 | |||||||
Restricted cash |
482,234 | (482,234 | )(2) | | | |||||||||||
Accounts receivable, net |
409,041 | | | 409,041 | ||||||||||||
Inventories, net |
116,248 | | 8,136 | 124,384 | ||||||||||||
Prepaid expenses |
26,931 | (1,243 | )(3) | | 25,688 | |||||||||||
Other |
36,858 | (68 | )(2) | | 36,790 | |||||||||||
Total current assets |
1,271,623 | (505,187 | ) | 8,136 | 774,572 | |||||||||||
Property, plant and equipment, net |
527,306 | | 40,665 | 567,971 | ||||||||||||
Goodwill |
87,728 | | 48,938 | 136,666 | (8) | |||||||||||
Intangibles, net |
10,294 | | 144,711 | 155,005 | ||||||||||||
Other assets |
125,120 | 4,895 | (3) | (26,721 | ) | 103,294 | ||||||||||
$ | 2,022,071 | $ | (500,292 | ) | $ | 215,729 | $ | 1,737,508 | ||||||||
Liabilities and Equity (Deficit) |
||||||||||||||||
Current liabilities: |
||||||||||||||||
Debt payable within one year |
$ | 15,335 | $ | | $ | | $ | 15,335 | ||||||||
Debtor-in-possession financing |
74,813 | (74,813 | )(2) | | | |||||||||||
Accounts payable |
171,886 | 6,763 | (4) | | 178,649 | |||||||||||
Payroll liabilities |
94,427 | 374 | (4) | (1,154 | ) | 93,647 | ||||||||||
Accrued liabilities |
92,426 | 4,232 | (4) | (9,462 | ) | 87,196 | ||||||||||
Total current liabilities |
448,887 | (63,444 | ) | (10,616 | ) | 374,827 | ||||||||||
Long-term debt |
458,373 | | | 458,373 | ||||||||||||
Pension benefits |
134,278 | 12,473 | (4) | 21,685 | 168,436 | |||||||||||
Postretirement benefits other than pensions |
75,198 | | 4,948 | 80,146 | ||||||||||||
Deferred tax liabilities |
9,218 | (268 | )(4) | 12,267 | 21,217 | |||||||||||
Other long-term liabilities |
21,124 | 1,891 | (4) | 7,839 | 30,854 | |||||||||||
Liabilities subject to compromise |
1,213,781 | (1,213,781 | )(4) | | | |||||||||||
Total liabilities |
2,360,859 | (1,263,129 | ) | 36,123 | 1,133,853 | |||||||||||
Successor preferred stock |
| 128,000 | (2)(4) | | 128,000 | |||||||||||
Equity (deficit): |
||||||||||||||||
Successor common stock |
| 17 | (2)(4)(7) | | 17 | |||||||||||
Successor additional paid-in capital |
| 473,275 | (2)(4)(7) | | 473,275 | |||||||||||
Predecessor common stock |
35 | (35 | )(5) | | | |||||||||||
Predecessor additional paid-in capital |
356,560 | (356,560 | )(5) | | | |||||||||||
Accumulated deficit |