frd20171231_10q.htm
 


UNITED STATES

SECURITIES AND EXCHANGE COMMISSION 

Washington, D.C. 20549

 


 

FORM 10-Q

 


 

QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

FOR THE QUARTERLY PERIOD ENDED DECEMBER 31, 2017

 

OR

 

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

FROM THE TRANSITION PERIOD FROM                      TO                     

 

COMMISSION FILE NUMBER 1-7521

 


 

FRIEDMAN INDUSTRIES, INCORPORATED

(Exact name of registrant as specified in its charter)

 


 

TEXAS

74-1504405

(State or other jurisdiction of

incorporation or organization)

(I.R.S. Employer

Identification Number)

 

1121 JUDSON ROAD, SUITE 124, LONGVIEW, TEXAS 75601

(Address of principal executive offices) (Zip Code)

 

(903758-3431

(Registrant’s telephone number, including area code)

 

 (Former name, former address and former fiscal year, if changed since last report)

 


 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☒    No  ☐

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ☒    No  ☐

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act. (Check one): 

 

Large accelerated filer

Accelerated filer

       

Non-accelerated filer

  (Do not check if a smaller reporting company)

Smaller reporting company

       
   

Emerging growth company

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ☐    No   ☒

 

At February 14, 2018, the number of shares outstanding of the issuer’s only class of stock was 7,009,444 shares of Common Stock.

 



 

 

 

 

 

 

TABLE OF CONTENTS

 

   

Part I — FINANCIAL INFORMATION

3

Item 1. Financial Statements

3

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

9

Item 3. Quantitative and Qualitative Disclosures About Market Risk

11

Item 4. Controls and Procedures

11

Part II — OTHER INFORMATION

12

Item 6. Exhibits

12

SIGNATURES

13

 

2

 

 

 

Part I — FINANCIAL INFORMATION

 

Item 1.

Financial Statements

 

FRIEDMAN INDUSTRIES, INCORPORATED

 

 

CONDENSED CONSOLIDATED BALANCE SHEETS — UNAUDITED

 

   

December 31, 2017

   

March 31, 2017

 

ASSETS

               

CURRENT ASSETS:

               

Cash

  $ 2,123,803     $ 1,461,695  

Accounts receivable, net of allowances for bad debts and cash discounts of $21,052 and $27,276 at December 31 and March 31, 2017

    7,054,181       8,939,051  

Inventories

    46,399,435       34,918,550  

Other

    380,576       113,540  

TOTAL CURRENT ASSETS

    55,957,995       45,432,836  

PROPERTY, PLANT AND EQUIPMENT:

               

Land

    1,452,799       1,082,331  

Buildings and yard improvements

    8,682,405       7,111,735  

Machinery and equipment

    39,237,369       31,451,479  

Construction in progress

          9,451,972  

Less accumulated depreciation

    (34,920,492 )     (33,924,353 )
      14,452,081       15,173,164  

OTHER ASSETS:

               

Deferred income tax asset

    463,728       1,165,950  

Federal income taxes recoverable

    866,894       913,347  

Cash value of officers’ life insurance and other assets

    206,125       578,000  

TOTAL ASSETS

  $ 71,946,823     $ 63,263,297  
                 

LIABILITIES AND STOCKHOLDERS’ EQUITY

               

CURRENT LIABILITIES:

               

Accounts payable and accrued expenses

  $ 6,575,457     $ 2,003,661  

Dividends payable

    70,094       70,094  

Contribution to retirement plan

    162,000       42,000  

Employee compensation and related expenses

    252,381       240,835  

Revolving line of credit

    3,750,000        

TOTAL CURRENT LIABILITIES

    10,809,932       2,356,590  

POSTRETIREMENT BENEFITS OTHER THAN PENSIONS

    170,441       550,282  

TOTAL LIABILITIES

    10,980,373       2,906,872  
                 

COMMITMENTS AND CONTINGENCIES

               

STOCKHOLDERS’ EQUITY:

               

Common stock, par value $1:

               

Authorized shares — 10,000,000

               

Issued shares — 8,185,160 at December 31 and March 31, 2017

    8,185,160       8,185,160  

Additional paid-in capital

    29,082,634       28,865,914  

Treasury stock at cost (1,175,716 shares at December 31 and March 31, 2017)

    (5,475,964 )     (5,475,964 )

Retained earnings

    29,174,620       28,781,315  

TOTAL STOCKHOLDERS’ EQUITY

    60,966,450       60,356,425  

TOTAL LIABILITIES AND STOCKHOLDERS’ EQUITY

  $ 71,946,823     $ 63,263,297  

 

 

3

 

 

 

FRIEDMAN INDUSTRIES, INCORPORATED

 

 

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS — UNAUDITED

 

   

Three months ended
December 31,

   

Nine months ended
December 31,

 
   

2017

   

2016

   

2017

   

2016

 

Net sales

  $ 28,033,521     $ 15,988,745     $ 77,194,500     $ 56,700,015  

Costs and expenses

                               

Costs of goods sold

    26,364,387       15,417,174       72,884,773       57,427,143  

General, selling and administrative costs

    999,220       957,305       2,962,139       2,965,884  

Interest expense

    8,451             8,451        
      27,372,058       16,374,479       75,855,363       60,393,027  

Interest and other income

    (4,375 )     (14,755 )     (13,125 )     (44,255 )

Earnings (loss) before income taxes

    665,838       (370,979 )     1,352,262       (3,648,757 )

Provision for (benefit from) income taxes:

                               

Current

    46,452             46,452       (673,618 )

Deferred

    496,457       (134,354 )     702,222       (673,413 )
      542,909       (134,354 )     748,674       (1,347,031 )

Net earnings (loss)

  $ 122,929     $ (236,625 )   $ 603,588     $ (2,301,726 )

Weighted average number of common shares outstanding:

                               

Basic

    7,009,444       6,799,444       7,009,444       6,799,444  

Diluted

    7,009,444       6,799,444       7,009,444       6,799,444  

Net earnings (loss) per share:

                               

Basic

  $ 0.02     $ (0.03 )   $ 0.09     $ (0.34 )

Diluted

  $ 0.02     $ (0.03 )   $ 0.09     $ (0.34 )

Cash dividends declared per common share

  $ 0.01     $ 0.01     $ 0.03     $ 0.03  

 

4

 

 

 

FRIEDMAN INDUSTRIES, INCORPORATED

 

 

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS — UNAUDITED

 

   

Nine Months Ended
December 31

 
   

2017

   

2016

 

OPERATING ACTIVITIES

               

Net earnings (loss)

  $ 603,588     $ (2,301,726 )

Adjustments to reconcile net earnings (loss) to cash provided by (used in) operating activities:

               

Depreciation

    996,139       1,202,549  

Deferred taxes

    702,222       (673,413 )

Compensation expense for restricted stock

    216,720        

Provision for postretirement benefits

    5,159       43,262  

Decrease (increase) in operating assets:

               

Accounts receivable, net

    1,884,870       (106,616 )

Inventories

    (11,480,885 )     7,375,622  

Federal income taxes recoverable

    46,453       (913,347 )

Other

    (267,036 )     (39,312 )

Increase (decrease) in operating liabilities:

               

Accounts payable and accrued expenses

    4,571,796       (595,940 )

Contribution to retirement plan

    120,000       126,500  

Employee compensation and related expenses

    11,546       (85,157 )

NET CASH PROVIDED BY (USED IN) OPERATING ACTIVITIES

    (2,589,428 )     4,032,422  

INVESTING ACTIVITIES

               

Purchase of property, plant and equipment

    (275,056 )     (655,032 )

Change in cash surrender value of officers’ life insurance

    (13,125 )     (44,250 )

NET CASH USED IN INVESTING ACTIVITIES

    (288,181 )     (699,282 )

FINANCING ACTIVITIES

               

Borrowings under revolving line of credit

    3,750,000        

Cash dividends paid

    (210,283 )     (203,982 )

NET CASH PROVIDED BY (USED IN) FINANCING ACTIVITIES

    3,539,717       (203,982 )

INCREASE IN CASH

    662,108       3,129,158  

Cash at beginning of period

    1,461,695       2,796,762  

CASH AT END OF PERIOD

  $ 2,123,803     $ 5,925,920  

 

5

 

 

FRIEDMAN INDUSTRIES, INCORPORATED

 

CONDENSED NOTES TO QUARTERLY REPORT — UNAUDITED

 

 

NOTE A — BASIS OF PRESENTATION

 

The accompanying unaudited, condensed consolidated financial statements have been prepared in accordance with the instructions to Form 10-Q and do not include all of the information and footnotes required by U.S. generally accepted accounting principles for complete financial statements. In the opinion of management, all adjustments (consisting of normal recurring accruals) considered necessary for a fair presentation have been included. For further information, refer to the financial statements and footnotes of Friedman Industries, Incorporated (the “Company”) included in its annual report on Form 10-K for the year ended March 31, 2017.

 

 

NOTE B — CHANGE IN ACCOUNTING ESTIMATE

 

During the quarter ended June 30, 2017, the Company determined that the economic useful lives of certain fixed assets at the Decatur, Alabama coil processing facility were greater than the useful lives used to calculate depreciation. As a result, effective April 1, 2017, the Company revised the useful lives of these assets resulting in a decrease in depreciation expense of approximately $160,000, an increase in net earnings of approximately $98,000 and an increase in diluted earnings per share of approximately $0.01 for the quarter ended December 31, 2017.

 

 

NOTE C — NEW ACCOUNTING STANDARDS

 

In August 2016, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update No. 2016-15, Statement of Cash Flows: Classification of Certain Cash Receipts and Cash Payments (“ASU 2016-15”). ASU 2016-15 eliminates the diversity in practice related to the classification of certain cash receipts and payments in the statement of cash flows by adding or clarifying guidance on eight specific cash flow issues. This new guidance is effective for fiscal years beginning after December 15, 2017, and interim periods within those fiscal years. Early adoption is permitted. The Company is evaluating the impact that adoption of the provisions of ASU 2016-15 will have on its consolidated financial statements but does not expect a material impact.

 

In February 2016, the FASB issued Accounting Standards Update No. 2016-02, Leases (“ASU 2016-02”). ASU 2016-02 establishes a new lease accounting standard that requires lessees to recognize a right of use asset and related lease liability for most leases having lease terms of more than 12 months.  Leases with a term of 12 months or less will be accounted for similar to existing guidance for operating leases.  This new guidance is effective for annual and interim periods beginning after December 15, 2018, but can be early adopted.  The Company is evaluating the impact that adoption of the provisions of ASU 2016-02 will have on its consolidated financial statements but does not expect a material impact.

 

In May 2014, the FASB issued Accounting Standards Update No. 2014-09, Revenue from Contracts with Customers (“ASU 2014-09”). ASU 2014-09 states that an entity should recognize revenue when it transfers promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. This update also requires additional disclosure about the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts, including significant judgments and changes in judgments, and assets recognized from costs incurred to obtain or fulfill a contract. The update supersedes most current revenue recognition guidance, including industry-specific guidance. ASU 2014-09 was initially effective for interim and annual periods beginning after December 15, 2016 and early application was not permitted. In August 2015, the FASB issued Accounting Standards Update No. 2015-14, Revenue from Contracts with Customers - Deferral of the Effective Date (“ASU 2015-14”). ASU 2015-14 defers the effective date of ASU 2014-09 to annual reporting periods beginning after December 15, 2017, including interim reporting periods within that reporting period, and only permits entities to adopt the standard one year earlier as of annual reporting periods beginning after December 15, 2016, including interim reporting periods within that reporting period. According to the deferred effective date, the new revenue standard will become effective for the Company’s fiscal year beginning April 1, 2018. The Company has reviewed its significant customer contracts according to the revenue recognition process prescribed by the new standard and does not expect a material financial statement impact due to adoption of the standard. The standard allows the choice of two adoption methods, full retrospective adoption or modified retrospective adoption. The Company is evaluating the selection of adoption method and developing accounting procedures and disclosures that will be necessary to comply with the new standard.

 

 

NOTE D — INVENTORIES

 

Inventories consist of prime coil, non-standard coil and tubular materials. Prime coil and non-standard coil inventories consist primarily of raw materials and tubular inventory consists of both raw materials and finished goods. Cost for prime coil inventory is determined using the last-in, first-out (“LIFO”) method. The Company’s LIFO reserve was approximately $6,051,000 at December 31, 2017 and $5,593,000 at March 31, 2017. The LIFO reserve signifies the difference between LIFO value used for financial reporting and the value under weighted average cost used for the Company’s internal perpetual inventory records. Cost for non-standard coil inventory is determined using the specific identification method. Cost for tubular inventory is determined using the weighted average method. LIFO inventories are valued at the lower of cost or market. All other inventories are valued at the lower of cost or net realizable value.

 

6

 

 

A summary of inventory values by product group follows:

 

   

December 31,
201
7

   

March 31,
201
7

 

Prime Coil Inventory

  $ 13,320,717     $ 8,481,605  

Non-Standard Coil Inventory

    3,236,378       1,119,170  

Tubular Raw Material

    4,922,377       1,480,730  

Tubular Finished Goods

    24,919,963       23,837,045  
    $ 46,399,435     $ 34,918,550  

 

 

NOTE E — DEBT

 

On December 11, 2017, the Company entered into a loan agreement for a $7,500,000 revolving line of credit facility (the “Credit Facility”) with Citizens National Bank (the “Bank”). The Credit Facility expires on December 11, 2018 and is collateralized by the Company’s accounts receivable and inventory. Borrowings under the credit facility bear interest at the Bank’s prime rate minus 0.55%. Interest payments on amounts advanced are due monthly and principal payments may be made at any time without penalty. All outstanding principal and accrued interest is due upon expiration of the Credit Facility. The Credit Facility contains financial covenants that require the Company to not permit: (1) tangible common shareholders’ equity to be less than $50.0 million and (2) maximum debt to exceed 50% of tangible common shareholders’ equity. At December 31, 2017, the Company had borrowings of $3,750,000 outstanding under the Credit Facility and the applicable interest rate was 3.95%. As of the filing date of this Form 10-Q, the Company has borrowings of $2,000,000 outstanding under the Credit Facility.

 

 

NOTE F — STOCK BASED COMPENSATION

 

The Company maintains the Friedman Industries, Incorporated 2016 Restricted Stock Plan (the “Plan”). The Plan is administered by the Compensation Committee (the “Committee”) of the Board of Directors (the “Board”) and continues indefinitely until terminated by the Board or until all shares allowed by the Plan have been awarded and earned. The aggregate number of shares of the Company’s Common Stock eligible for award under the Plan is 500,000 shares. Subject to the terms and provisions of the Plan, the Committee may, from time to time, select the employees to whom awards will be granted and shall determine the amount and applicable restrictions of each award. Forfeitures are accounted for upon their occurrence.

 

As of December 31, 2017, the total number of restricted shares awarded under the Plan was 210,000 shares. All of the awarded shares have five year cliff vesting restrictions with vesting occurring on January 4, 2022. No other shares have been awarded under the Plan. The grant date fair value of the awarded shares is $1,444,800 and is being recognized as compensation expense over the 60 month requisite service period. The Company recorded compensation expense of $72,240 in the quarter ended December 31, 2017 relating to the stock awards issued under the Plan. In the quarter ended December 31, 2016, the Company maintained no equity compensation plans.

 

 

NOTE G — SEGMENT INFORMATION (in thousands)

 

   

Three Months Ended
December 31,

   

Nine Months Ended
December 31,

 
   

2017

   

2016

   

2017

   

2016

 

Net sales

                               

Coil

  $ 22,410     $ 13,495     $ 60,547     $ 47,945  

Tubular

    5,624       2,494       16,648       8,755  

Total net sales

  $ 28,034     $ 15,989     $ 77,195     $ 56,700  
                                 

Operating profit (loss)

                               

Coil

  $ 1,178     $ 538     $ 2,483     $ (858 )

Tubular

    (53 )     (437 )     261       (1,360 )

Total operating profit (loss)

    1,125       101       2,744       (2,218 )

Corporate expenses

    463       487       1,405       1,475  

Interest & other income

    (4 )     (15 )     (13 )     (44 )

Total earnings (loss) before taxes

  $ 666     $ (371 )   $ 1,352     $ (3,649 )

 

7

 

 

   

December 31,
201
7

   

March 31,
201
7

 

Segment assets

               

Coil

  $ 26,770     $ 21,833  

Tubular

    41,501       37,299  
      68,271       59,132  

Corporate assets

    3,676       4,131  
    $ 71,947     $ 63,263  

 

 

Corporate expenses reflect general and administrative expenses not directly associated with segment operations and consist primarily of corporate executive and accounting salaries, professional fees and services, bad debts, retirement plan contribution expense, corporate insurance expenses and office supplies. Corporate assets consist primarily of cash, the cash value of officers’ life insurance, deferred taxes and federal income taxes recoverable.

 

 

NOTE H — SUPPLEMENTAL CASH FLOW INFORMATION

 

The Company paid income taxes of approximately $8,000 and $13,500 in the nine months ended December 31, 2017 and 2016, respectively. The Company paid no interest in the nine months ended December 31, 2017 or 2016. Non-cash financing activities consisted of accrued dividends of $70,094 in both nine-month periods ended December 31, 2017 and 2016, respectively. There were noncash transactions of $385,000 and $293,000 in the nine months ended December 31, 2017 and 2016, respectively, for the transfer of ownership of life insurance policies from the Company to officers upon their retirement.

 

 

NOTE I — INCOME TAXES

 

The effective tax rate for the nine months ended December 31, 2017 was impacted by recording the provisional impact of the Tax Cuts and Jobs Act (the “Tax Act”), enacted on December 22, 2017 by the U.S. government. The Tax Act makes broad and complex changes to the U.S. tax code that will affect our fiscal year ending March 31, 2018, including, but not limited to, reducing the U.S. federal corporate tax rate and repealing the deduction for domestic production activities.

 

The Tax Act reduces the federal corporate tax rate to 21.0% effective January 1, 2018. In accordance with Section 15 of the Internal Revenue Code, the Company will utilize a blended rate of approximately 30.8% for our fiscal 2018 tax year. The blended rate is calculated by applying prorated percentages, based on the number of days prior to and subsequent to the January 1, 2018 effective date, to the tax rate applicable for the respective pre and post effective periods. During the quarter ended December 31, 2017, the Company recorded provisional deferred tax expense of approximately $240,500 for the re-measurement of deferred tax assets and liabilities.

 

On December 22, 2017, the Securities and Exchange Commission issued Staff Accounting Bulletin 118 (“SAB 118”), which provides guidance on accounting for tax effects of the Tax Act. SAB 118 provides a measurement period, which should not extend beyond one year from the Tax Act enactment date, for companies to complete the accounting under Accounting Standards Codification 740 (“ASC 740”). In accordance with SAB 118, a company must reflect the income tax effects of those aspects of the Tax Act for which the accounting under ASC 740 is complete. To the extent that a company’s accounting for certain income tax effects of the Tax Act is incomplete but it is able to determine a reasonable estimate, it must record a provisional estimate to be included in the financial statements. If a company cannot determine a provisional estimate to be included in the financial statements, it should continue to apply ASC 740 according to the tax laws that were in effect immediately before the enactment of the Tax Act. Deferred tax assets and liabilities have been recorded at provisional amounts and represent the Company’s best estimates based on records, information and current guidance. Additional information and analysis is required to finalize the impact that the Tax Act will have on the Company’s full fiscal year financial results. The Company currently anticipates finalizing and recording any resulting adjustments by the end of the fiscal year ending March 31, 2018.

 

The Company’s effective tax rate for the nine months ended December 31, 2016 differed from the statutory rate due primarily to state income tax benefits resulting from the loss before taxes.

 

8

 
 

 

 

Item 2.     Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

Overview

 

Friedman Industries, Incorporated is a manufacturer and processor of steel products and operates in two reportable segments; coil products and tubular products.

 

The coil product segment includes the operation of two hot-roll coil processing facilities; one in Hickman, Arkansas and the other in Decatur, Alabama. Each facility operates a temper mill and a cut-to-length line. The temper mill improves the flatness and surface qualities of the coils and the cut-to-length line levels the steel and cuts the coils into sheet and plate of prescribed lengths. Combined, the facilities are capable of cutting sheet and plate with thicknesses ranging from 14 gauge to ½” thick. The coil product segment sells its prime grade inventory under the Friedman Industries name but also maintains an inventory of non-standard coil products, consisting primarily of mill secondary and excess prime coils, which are sold through the Company’s XSCP division. The coil product segment also processes customer-owned coils on a fee basis.

 

The tubular product segment consists of the Company’s Texas Tubular Products division (“TTP”) located in Lone Star, Texas. TTP operates two electric resistance welded pipe mills with a combined outside diameter (“OD”) size range of 2 3/8” OD to 8 5/8” OD. Both pipe mills are American Petroleum Institute (“API”) licensed to manufacture line pipe and oil country pipe and also manufacture pipe for structural purposes that meets other recognized industry standards. TTP has a pipe finishing facility that threads and couples oil country tubular goods and performs other services that are customary in the pipe finishing process. The pipe finishing facility is API licensed and focuses on threading semi-premium connections. TTP’s inventory consists of raw materials and finished goods. Raw material inventory consists of hot-rolled steel coils that TTP will manufacture into pipe. Finished goods inventory consists of pipe TTP has manufactured and new mill reject pipe that TTP purchases from U.S. Steel Tubular Products, Inc. (“USS”).

 

The Company purchases its inventory from a limited number of suppliers. Loss of any of these suppliers could have a material adverse effect on the Company’s business.

 

Results of Operations

 

Nine Months Ended December 31, 2017 Compared to Nine Months Ended December 31, 2016

 

During the nine months ended December 31, 2017, sales, costs of goods and gross profit increased $20,494,485, $15,457,630 and $5,036,855, respectively, from the comparable amounts recorded during the nine months ended December 31, 2016. Sales increased due primarily to both an increase in the average per ton selling price of the Company’s inventoried products and an increase in tons sold. The average per ton selling price of the Company’s inventoried products rose from approximately $560 per ton in the 2016 period to approximately $660 per ton in the 2017 period. Tons sold increased from approximately 101,000 tons in the 2016 period to approximately 114,500 tons in the 2017 period. Gross margin as a percentage of sales improved from a gross loss of approximately 1.3% in the 2016 period to a gross profit of approximately 5.6% in the 2017 period. The Company’s results before income taxes improved from a loss before taxes of $3,648,757 for the 2016 period to earnings before taxes of $1,352,262 for the 2017 period.

 

Coil product segment sales increased approximately $12,602,000 during the 2017 period. This increase resulted primarily from both an increase in the average per ton selling price and an increase in tons sold. The average per ton selling price increased from approximately $561 per ton in the 2016 period to approximately $671 per ton in the 2017 period. The average selling price increased due primarily to increased costs of raw materials and the 2016 period’s selling price being depressed due to pricing commitments made when steel prices were at lower levels in late 2015. Coil segment shipments increased from approximately 85,500 tons in the 2016 period to approximately 90,000 tons in the 2017 period. Coil segment operations recorded an operating profit of approximately $2,483,000 in the 2017 period and an operating loss of approximately $858,000 in the 2016 period. The coil segment’s profit margins are significantly impacted by the application of the LIFO method of inventory valuation. LIFO charges or credits are driven by relative changes in the cost and quantities of hot-rolled coils purchased. During the 2017 period, the coil segment experienced modest increases in the price for hot-rolled coils and recorded a LIFO charge of approximately $458,500. During the 2016 period, the coil segment experienced a significant rise in the costs for hot-rolled coils and recorded a LIFO charge of approximately $2,931,000. The Company continues to experience intense competition for sales due to the general availability of hot-rolled sheet and plate.

 

Tubular product segment sales increased approximately $7,893,000 during the 2017 period. This increase resulted from both an increase in sales volume for the Company’s inventoried tubular products and an increase in the average per ton selling price of these products. Tubular tons shipped increased from approximately 16,000 tons in the 2016 period to approximately 24,500 tons in the 2017 period. The average per ton selling price of these tubular products increased from approximately $558 per ton in the 2016 period to approximately $616 per ton in the 2017 period. In addition, tubular segment sales increased due to the Company’s pipe finishing facility commencing operations during May 2017 and generating revenue of approximately $1,664,000 for the nine months ended December 31, 2017. The tubular product segment recorded an operating profit of approximately $261,000 in the 2017 period and an operating loss of approximately $1,360,000 in the 2016 period. Tubular segment results for both the 2017 and 2016 periods were negatively impacted by the effects of the most recent recession in the U.S. energy business.

 

9

 

 

USS has been the primary supplier of new mill reject pipe to the Company. In March 2016, USS announced it was temporarily idling pipe production at its Lone Star Tubular Operations facility due to weak market conditions. In December 2016, USS announced plans to permanently idle its #1 pipe mill at the Lone Star facility. In May 2017, USS resumed production at its Lone Star facility’s #2 pipe mill. The Company expects the volume and size range of new mill reject pipe supply from USS to be reduced given the permanent idling of the Lone Star facility’s #1 pipe mill. During the 2017 period, the Company did not manufacture any pipe for USS. The Company continues to manufacture pipe for sale to customers other than USS and sources coil material for this pipe production from domestic steel mills other than USS. Loss of USS as a supplier or customer could have a material adverse effect on the Company’s business. The Company can make no assurances as to orders from USS or the amount of supply that will be available from USS in the future.

 

Income taxes in the 2017 period increased $2,095,705 from the amount recorded in the 2016 period. This increase was related primarily to the increase in earnings before taxes in the 2017 period.

 

Three Months Ended December 31, 2017 Compared to Three Months Ended December 31, 2016

 

During the three months ended December 31, 2017, sales, costs of goods sold and gross profit increased $12,044,776, $10,947,213 and $1,097,563, respectively, from the comparable amounts recorded during the three months ended December 31, 2016. The increase in sales was related to both an increase in tons sold and an increase in the average per ton selling price. Tons sold increased from approximately 26,000 tons in the 2016 quarter to approximately 42,000 tons in the 2017 quarter. The average per ton selling price increased from approximately $608 per ton in the 2016 quarter to approximately $664 per ton in the 2017 quarter. Gross profit as a percentage of sales improved from approximately 3.6% for the 2016 quarter to approximately 6.0% for the 2017 quarter. The Company’s results before income taxes improved from a loss before taxes of $370,979 for the 2016 quarter to earnings before taxes of $665,838 for the 2017 quarter.

 

Coil product segment sales increased approximately $8,915,000 during the 2017 quarter. This increase resulted primarily from both an increase in tons sold and an increase in the average per ton selling price. Coil tons shipped increased from approximately 22,000 tons in the 2016 quarter to approximately 33,500 tons in the 2017 quarter. The improved shipping volume for the 2017 quarter was primarily due to increased demand among many of the segment’s customers and an increase in the number of customers sold. Management expects the coil segment’s fourth quarter shipping volume to increase slightly compared to the third quarter’s shipping volume. The average selling price increased from approximately $611 per ton in the 2016 quarter to $668 per ton in the 2017 quarter. Coil segment operations recorded operating profits of approximately $1,178,000 and $538,000 in the 2017 and 2016 quarters, respectively. The coil segment’s profit margins are significantly impacted by the application of the LIFO method of inventory valuation. LIFO charges or credits are driven by relative changes in the cost and quantities of hot-rolled coils purchased. During the three month periods ended December 31, 2017 and 2016, the coil segment experienced relatively stable pricing for hot-rolled coils. The Company recorded a LIFO charge of approximately $55,000 for the 2017 quarter and a LIFO credit of approximately $21,000 for the 2016 quarter. The Company continues to experience intense competition for sales due to the general availability of hot-rolled sheet and plate.

 

Tubular product segment sales increased approximately $3,130,000 during the 2017 quarter. This increase resulted primarily from an increase in tons sold and an increase in the average per ton selling price. Tubular tons shipped increased from approximately 4,000 tons in the 2016 quarter to approximately 8,500 tons in the 2017 quarter. The average per ton selling price of tubular products increased from approximately $595 per ton in the 2016 quarter to approximately $648 per ton in the 2017 quarter. The tubular product segment recorded operating losses of approximately $53,000 and $437,000 in the 2017 and 2016 quarters, respectively. The tubular segment’s newly operational finishing facility did not generate any revenue during the 2017 quarter. However, management expects the pipe finishing facility to resume operations in March 2018. Historically, the tubular segment has produced and sold API line pipe through an exclusive customer arrangement. Late in the 2017 quarter, TTP began actively producing, marketing and selling line pipe directly to distributors. Management expects that the tubular segment’s fourth quarter operating results will be positively impacted by increased sales and mill production related to line pipe. Increasing market acceptance of the Company’s tubular products among both line pipe distributors and midstream companies is a key component of management’s strategy for long-term success in the small diameter line pipe market.

 

USS has been the primary supplier of new mill reject pipe to the Company. In March 2016, USS announced it was temporarily idling pipe production at its Lone Star Tubular Operations facility due to weak market conditions. In December 2016, USS announced plans to permanently idle its #1 pipe mill at the Lone Star facility. In May 2017, USS resumed production at its Lone Star facility’s #2 pipe mill. The Company expects the volume and size range of new mill reject pipe supply from USS to be reduced given the permanent idling of the Lone Star facility’s #1 pipe mill. During the 2017 quarter, the Company did not manufacture any pipe for USS. The Company continues to manufacture pipe for sale to customers other than USS and sources coil material for this pipe production from domestic steel mills other than USS. Loss of USS as a supplier or customer could have a material adverse effect on the Company’s business. The Company can make no assurances as to orders from USS or the amount of supply that will be available from USS in the future.

 

Income taxes in the 2017 quarter increased $677,263 from the amount recorded in the 2016 quarter. This increase was related primarily to the increase in earnings before taxes in the 2017 quarter but also to approximately $240,500 in deferred tax expense recognized for provisional adjustments related to the tax reform enacted by the U.S. government during the quarter.

 

10

 

 

FINANCIAL POSITION, LIQUIDITY AND CAPITAL RESOURCES 

 

The Company remained in a strong, liquid position at December 31, 2017. The current ratios were 5.2 and 19.3 at December 31, 2017 and March 31, 2017, respectively. Working capital was $45,148,063 at December 31, 2017 and $43,076,246 at March 31, 2017.

 

At December 31, 2017, the Company maintained assets and liabilities at levels it believed were commensurate with operations. Changes in balance sheet amounts occurred in the ordinary course of business. Cash increased as a result of $3,750,000 borrowed under a revolving line of credit put into place during the quarter ended December 31, 2017. The increase in cash from financing activities was partially offset by cash used in operating activities, purchases of property, plant and equipment and the payment of cash dividends. Accounts payable and inventory increased significantly due primarily to the volume, timing and payment terms of inventory purchases for both the Company’s coil segment and tubular segment. The Company expects to continue to monitor, evaluate and manage balance sheet components depending on changes in market conditions and the Company’s operations.

 

The Company believes that its current cash position along with cash flows from operations and borrowing capability due to its financial position are adequate to fund its expected cash requirements for the next 24 months.

 

 

CRITICAL ACCOUNTING POLICIES

 

The preparation of consolidated financial statements requires the Company to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses. Significant estimates that are subject to the Company’s assumptions include the valuation of LIFO inventories in the Company’s quarterly reporting, determination of useful lives for fixed assets and determination of the allowance for doubtful accounts. Valuation of LIFO inventories in the Company’s quarterly reporting requires estimates of the year end quantities, which is inherently difficult. The determination of useful lives for depreciation of fixed assets requires the Company to make assumptions regarding the future productivity of the Company’s fixed assets. The allowance for doubtful accounts requires the Company to draw conclusions on the future collectibility of the Company’s accounts receivable. Actual results could differ from these estimates.

 

FORWARD-LOOKING STATEMENTS

 

From time to time, the Company may make certain statements that contain forward-looking information (as defined in the Private Securities Litigation Reform Act of 1996, as amended) and that involve risk and uncertainty. These forward-looking statements may include, but are not limited to, future changes in the Company’s financial condition or results of operations, future production capacity, product quality and proposed expansion plans. Forward-looking statements may be made by management orally or in writing including, but not limited to, this Management’s Discussion and Analysis of Financial Condition and Results of Operations and other sections of the Company’s filings with the SEC under the Securities Act of 1933, as amended, and the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Actual results and trends in the future may differ materially depending on a variety of factors including, but not limited to, changes in the demand for and prices of the Company’s products, changes in the demand for steel and steel products in general and the Company’s success in executing its internal operating plans, including any proposed expansion plans.

 

Item  3.

Quantitative and Qualitative Disclosures About Market Risk

 

Not required

 

Item 4.

Controls and Procedures

 

The Company’s management, with the participation of the Company’s principal executive officer (“CEO”) and principal financial officer, evaluated the effectiveness of the Company’s disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) promulgated under the Exchange Act), as of the end of the fiscal quarter ended December 31, 2017. Based on this evaluation, the Company’s CEO and principal financial officer have concluded that the Company’s disclosure controls and procedures were effective as of the end of the fiscal quarter ended December 31, 2017 to ensure that information that is required to be disclosed by the Company in the reports it files or submits under the Exchange Act is (i) recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and (ii) accumulated and communicated to the Company’s management, including the CEO and principal financial officer, as appropriate, to allow timely decisions regarding required disclosure.

 

There were no changes in the Company’s internal control over financial reporting that occurred during the fiscal quarter ended December 31, 2017 that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

 

11

 

 

 

FRIEDMAN INDUSTRIES, INCORPORATED

Three Months Ended December 31, 2017

 

Part II — OTHER INFORMATION

 

Item 6.

Exhibits

 

Exhibits

 

 

     

  3.1

Articles of Incorporation of the Company, as amended (incorporated by reference from Exhibit 3.1 to the Company’s Form S-8 filed on December 21, 2016).

     

  3.2

Articles of Amendment to the Articles of Incorporation of the Company, as filed with the Texas Secretary of State on September 22, 1987 (incorporated by reference from Exhibit 3.1 to the Company’s Form S-8 filed on December 21, 2016).

     

  3.3

Amended and Restated Bylaws of the Company (incorporated by reference from Exhibit 3.2 to the Company’s Form S-8 filed on December 21, 2016).

     

  10.1

Revolving Line of Credit Loan Agreement, dated December 11, 2017 (incorporated by reference from Exhibit 10.1 to the Company’s Current Report on Form 8-K, filed with the SEC on December 15, 2017).

     

  10.2

Promissory Note, dated December 11, 2017 (incorporated by reference from Exhibit 10.2 to the Company’s Current Report on Form 8-K, filed with the SEC on December 15, 2017).

     

  10.3

Commercial Security Agreement, dated December 11, 2017 (incorporated by reference from Exhibit 10.3 to the Company’s Current Report on Form 8-K, filed with the SEC on December 15, 2017).

     

  31.1

Certification Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002, signed by Robert Sparkman

     

  31.2

Certification Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002, signed by Alex LaRue

     

  32.1

Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, signed by Robert Sparkman

     

  32.2

Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, signed by Alex LaRue

     

101.INS

XBRL Instance Document

     

101.SCH

XBRL Taxonomy Schema Document

     

101.CAL

XBRL Calculation Linkbase Document

     

101.DEF

XBRL Definition Linkbase Document

     

101.LAB

XBRL Label Linkbase Document

     

101.PRE

XBRL Presentation Linkbase Document

 

12

 

 

 

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

 

 

FRIEDMAN INDUSTRIES,

INCORPORATED

       

Date: February 14, 2018

 

 

 

 

 

By

/s/ ALEX LARUE

 

 

 

Alex LaRue, Vice President –

Secretary and Treasurer

(Principal Financial Officer)

 

13