UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

 

Form 10-K

 

(Mark One)

For the fiscal year ended December 31, 2018

or

For the transition period from             to

Commission file number: 000-52024

 

ALPHATEC HOLDINGS, INC.

(Exact Name of Registrant as Specified in its Charter)

 

 

(760) 431-9286

(Registrant’s Telephone Number, Including Area Code)

 

Securities registered pursuant to Section 12(b) of the Exchange Act:

 

 

Securities registered pursuant to Section 12(g) of the Exchange Act: None

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ☐    No  ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Exchange Act.    Yes  ☐    No  ☒

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☒    No  ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).    Yes  ☒    No  ☐

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by a check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ☐    No  ☒

The aggregate market value of the registrant’s common stock held by non-affiliates of the registrant (without admitting that any person whose shares are not included in such calculation is an affiliate) computed by reference to the price at which the common stock was last sold as of the last business day of the registrant's most recently completed second fiscal quarter (June 29, 2018), was approximately $70.2 million.

The number of outstanding shares of the registrant’s common stock, par value $0.0001 per share, as of March 25, 2019 was 46,847,652.

DOCUMENTS INCORPORATED BY REFERENCE

The following documents (or parts thereof) are incorporated by reference into the following parts of this Form 10-K: Certain information required in Part III of this Annual Report on Form 10-K is incorporated from the Registrant’s Proxy Statement for the 2019 Annual Meeting of Stockholder.

 

 

 

---

ALPHATEC HOLDINGS, INC.

FORM 10-K—ANNUAL REPORT

For the Fiscal Year Ended December 31, 2018

Table of Contents

 

 

In this Annual Report on Form 10-K, the terms “we,” “us,” “our,” “Alphatec Holdings” and “Alphatec” mean Alphatec Holdings, Inc. and our subsidiaries and their subsidiaries. “Alphatec Spine” refers to our wholly-owned operating subsidiary Alphatec Spine, Inc. “Scient’x” refers to our operating affiliate, Scient’x S.A.S., which is wholly-owned by several of our subsidiaries, and Scient’x’s subsidiaries. “SafeOp” refers to our wholly-owned operating subsidiary SafeOp Surgical, Inc.

 

 

 

 

---

PART I

We are a medical technology company focused on the design, development, and advancement of technology for better surgical treatment of spinal disorders. We are dedicated to revolutionizing the approach to spine surgery. We have a broad product portfolio designed to address the majority of U.S. market for fusion-based spinal disorder solutions. We intend to drive growth by exploiting our collective spine experience and investing in the research and development to continually differentiate our solutions and improve spine surgery. We believe our future success will be fueled by introducing market-shifting innovation to the spine market, and we believe that we are well-positioned to capitalize on current spine market dynamics.

We market and sell our products in the U.S. through a network of independent distributors and direct sales representatives. An objective of our leadership team is to deliver increasingly consistent, predictable growth. To accomplish this, we have partnered more closely with new and existing distributors to create a more dedicated and loyal sales channel for the future. We have added, and intend to continue to add, new high-quality dedicated distributors to expand future growth. We believe this will allow us to reach an untapped market of surgeons, hospitals, and national accounts across the U.S., as well as better penetrate existing accounts and territories.

We have made significant progress in the transition of our sales channel since early 2017. Going forward, we intend to continue to relentlessly drive toward a fully exclusive network of independent and direct sales agents. Recent consolidation in the industry is facilitating the process, as large, seasoned agents are seeking opportunities to re-enter the spine market by partnering with spine-focused companies that have broad, growing product portfolios.

Recent Developments

 

In March 2019, we entered into an amendment to our credit facility with Squadron Medical Finance Solutions, LLC (“Squadron”), pursuant to which Squadron extended an additional $30 million in draws available to us through November 2023.  Additional borrowings will be subject to the same terms as the original credit agreement. At such time as we make our first draw under the Expanded Credit Facility, we will issue to Squadron warrants to purchase 4.8 million shares of our common stock at an exercise price of $2.17 per share. The warrants will have a seven-year term and will be immediately exercisable upon issuance.

 

Strategy

By leveraging our team’s extensive spine experience to create clinically distinct solutions that improve surgical outcomes, we believe that we will be positioned to take a greater share of the U.S. spine market, becoming the partner of choice for spine surgeons, hospitals, healthcare systems, and payers. We are committed to attracting, engaging, and retaining the best talents in the industry. We are also driving an organizational transformation by prioritizing the following vital initiatives:

Create Clinical Distinction

We are committed to the development, launch, and promotion of technologies intended to simplify surgical procedures, provide enhanced information for surgeons, and improve patient outcomes. We offer a broad portfolio of products that address the core spine pathologies. Currently, over 90% of our revenue is generated by products developed and launched before 2017, but we are making investments to significantly advance the clinical distinction of our portfolio and accelerate revenue growth.

 

We believe that surgeons yearn for intra-operative information that can drive objective decision-making and improve patient outcomes. Our answer to that need is the Alpha Informatix^TM platform, which delivers relevant, real-time information via a small footprint. In February 2019, we received 510(k) clearance for our automated SafeOp neuromonitoring system for use in real-time intraoperative nerve location and health assessment. The SafeOp neuromonitoring system is the first solution delivered as part of our Alpha Informatix platform, which we plan to expand to provide surgeons with intraoperative information beyond neuromonitoring.

 

We are developing next-generation access systems, implants, and biologics that are expected to seamlessly integrate into the Alpha Informatix platform to enable elegant, minimally disruptive spine access that achieves clinical success regardless of the surgical approach. We expect our revenue mix to shift increasingly toward newly developed solutions as we bring next generation products to market. That shift began late in 2018 as we executed on several new product alpha evaluations that will uniquely address a broad range of surgical procedures. During the third quarter of 2018, we introduced our IdentiTi collection of porous titanium interbody implants. Our IdentiTi product family offers implant options that take advantage of bone’s affinity for titanium. Because of their porosity, IdentiTi implants have a surface roughness that enhances stability. The implants are also designed for the biological, biomechanical, and imaging characteristics that surgeons seek in a fusion construct. In September 2018, we received 510(k) clearance

1

---

for our OsseoScrew System, a next-generation expandable posterior fixation implant designed to restore the integrity of the spinal column in patients with advanced stage thoracolumbar tumors. In the third quarter of 2018, we introduced the alpha release of our next generation, comprehensive thoracolumbar fixation system. With a substantially expanded offering that will distinguish itself in minimally disruptive and open techniques, the feature set of this new fixation system seamlessly integrates into any ATEC Spine procedure, and will serve as an anchor as we increasingly shift toward proceduralization.  

We plan to commercially launch 12 new products in 2019. Looking beyond 2019, we intend to be a leader in the industry in innovation by releasing eight to ten new products each year. We expect our growth potential to compound as our new solutions drive surgeon adoption of ATEC procedures, and increase the number of ATEC products sold into each of those procedures.

Compel Surgeon Adoption

We are re-introducing the surgical community to Alphatec, and laying the groundwork to drive surgeon adoption of not only our existing portfolio, but also the innovation that we have introduced in 2018 and intend to introduce over the next several years. A key component of our drive to renew surgeon interest is our “ATEC Experience” events, our educational program for visiting surgeons. For the year ended December 31, 2018, we have hosted nearly three times the number of surgeons at ATEC Experience events compared to the year ended December 31, 2017.

Importantly, the surgeon relationships that we are creating are both strong, and accelerating. Throughout 2018, revenue attributable to new surgeon customers has substantially outpaced overall revenue growth. Also, the initiation of new surgeon relationships has accelerated in each quarter during 2018.

We are especially encouraged by the progress being made with surgeon adoption considering that the vast majority of our revenue is currently being driven by legacy Alphatec products. We believe that the surgeons that are partnering with us today recognize our team’s ability to architect meaningful innovation. With the investments that we have made into research and development and spine talent, we intend to continue to deliver innovative technologies into the operating room over the coming years.

Revitalize the Sales Channel

Currently, we market and sell our products in the U.S. through a network of independent distributors and direct sales representatives. We seek to deliver consistent, predictable growth through a durable brand commitment. To accomplish this, we believe there is significant opportunity for us to partner closely with our distributors to create a more dedicated and focused network. We believe that recent consolidation in the industry is increasingly affording us an opportunity to attract large, experienced distributors and agents seeking partnerships with companies like ours; partners that can offer a robust product portfolio and a pipeline of technologies focused solely on spine solutions.

During 2018, we continued adding higher-volume, more sophisticated distributors to our sales channel, while simultaneously terminating non-strategic distribution relationships that do not serve our long-term vision. This has enabled us, and we believe will continue to enable us, to reach new surgeons, hospitals, and national accounts across the U.S., and more effectively penetrate existing accounts and territories. Since 2016, we have decreased our total number of distributors from more than 200 to less than 80, driving the percent of sales contributed by our strategic distribution channel to approximately 80% for the year ended December 31, 2018.

We also employ a national accounts team that is responsible for securing access at hospitals and group purchasing organizations, or GPOs, across the U.S. We have been very successful securing access to hospitals and GPOs, and today the majority of our business is achieved through these accounts. We will continue to focus on developing and maintaining relationships with key GPOs and hospital networks to secure favorable contracts and develop strategies to convert or grow business within existing accounts.

We are also enhancing our sales training and education programs for independent distributors and direct sales representatives to optimize overall sales productivity.

Spine Anatomy

The spine is the core of the human skeleton and provides important structural support and alignment while remaining flexible to allow movement. The spine is a column of 33 bones that protects the spinal cord and provides the main support for your body. Each bony segment of the spine is referred to as a vertebra (two or more are called vertebrae). The spine has five regions containing groups of similar bones, listed from top to bottom: seven cervical vertebrae in the neck, twelve thoracic vertebrae in the mid-back (each attached to a rib), five lumbar vertebrae in the lower back, five sacral vertebrae fused together to form one bone in the hip region, and four coccygeal bones fused together that form the tailbone. At the front of each vertebra is a block of bone called the vertebral body, Vertebrae are stacked on top of each other and enable people to sit and stand upright. Vertebrae in the cervical, thoracic and lumbar

2

---

regions are separated from each other and cushioned by a rubbery soft tissue called the intervertebral disc. Strong muscles and bones, flexible tendons and ligaments and sensitive nerves contribute to a healthy spine. Pain can be caused when any of these structures are affected by strain, injury or disease.

The Alphatec Solution

Our principal procedural offerings include a wide variety of Spine Approach Technologies^TM, designed to achieve clinical success in conditions from degenerative to complex deformity and trauma. Our Spine Approach Technologies are comprised of intra-operative information and neuromonitoring technologies, access systems, interbody implants, fixation systems, and various biologics offerings all designed to improve patient outcomes by achieving the three tenets of spine surgery: (1) decompression, (2) stabilization, and (3) alignment.

A summary of our core products is provided below.

Currently Marketed Products

Minimally Invasive Surgery, or MIS, Products

Battalion Lateral Spacer System and Squadron Lateral Retractor. The Battalion Lateral Spacer System with the Alphatec Squadron Lateral Retractor provides surgeons with a next-generation lateral system with innovative, unique design characteristics including, total blade control technology that allows the surgeon to maintain approach aperture throughout the procedure, in-situ blade height adjustment and blade replacement, combined with the Battalion Lateral Spacer is available in 0° and 15° lordosis with a variety of width and height options for lumbar and thoracic approaches. Our Battalion Lateral Spacer System and Squadron Lateral Retractor received clearance of an FDA 510(k) premarket notification from the U.S. Food and Drug Administration, or FDA, in 2016, and was commercially released in 2017.

Illico Minimally Invasive Surgery System. The Illico Minimally Invasive Surgery System is a cannulated pedicle screw system that is designed to be inserted via a minimally invasive surgical procedure. Access to the spine is gained through a small incision. The surgeon is then able to see the surgical site by using a small canal through which implants are inserted into the patient with a minimum amount of disruption to the surrounding tissue. The Illico Minimally Invasive Surgery System is designed to limit trauma to the tissue surrounding the location of the surgery and to enable patients to recover faster.

Thoracolumbar Fixation Products

Arsenal Degenerative System. Arsenal Degenerative Spinal Fixation System is a comprehensive system for both simple and complex degenerative spinal fusion procedures. The Arsenal Degenerative Spinal Fixation System is designed to provide operational

3

---

efficiency, biomechanical strength, and surgical simplicity while providing a complete solution to combat most complex degenerative pathologies. The system combines low-profile implants with intuitive instrumentation and proven strength.

Arsenal Deformity System.  The Arsenal Deformity System expands the Arsenal platform to address complex deformity including adult and adolescent idiopathic scoliosis, or AIS, spinal deformity pathologies. The Arsenal Deformity System was thoughtfully designed to provide surgeons with a complete solution to address complex deformity procedures. The Arsenal Deformity System provides surgeons with unique uniplanar screws, which enable easier screw positioning and rod placement through a tulip that has 360 degrees of rotation while restricting motion in the medial/lateral plane for de-rotation correction. Additionally, the Arsenal Deformity System includes a wide variety of low-profile implants providing a better anatomical fit and increased ability to address patient pathologies, ergonomically designed instrumentation to improve surgical efficiency and comfort during complex surgeries and proven biomechanical strength.

Arsenal CBx Cortical Bone Fixation System. The Arsenal CBx Cortical Bone Fixation System is the first extension to the Arsenal platform. An alternative to traditional pedicle screw placement, the Arsenal CBx Cortical Bone Fixation System utilizes a midline approach and cortical bone trajectory to achieve maximum fixation through a less-invasive procedure. This Arsenal CBx Cortical Bone Fixation System leverages the strengths of the Arsenal product platform with the benefits of a minimally disruptive procedure to enhance patient outcomes. Due to the midline approach and inward-outward screw trajectory, soft tissue and muscle exposure requirements are greatly reduced compared to the approach for traditional screw trajectory. The Arsenal CBx Cortical Bone Fixation System is a compatible fixation option for both posterior lumbar interbody fusion, or PLIF, or transforaminal lumbar interbody fusion, or TLIF. Additionally, this system can be a unique muscle sparing approach to revision surgery.

Zodiac Degenerative Spinal Fixation System. The Zodiac Degenerative Spinal Fixation System is a comprehensive spinal system that can be used to address both degenerative spinal conditions, as well as deformity correction. The Zodiac Degenerative Spinal Fixation System offers polyaxial pedicle screws, accompanying implants and advanced instruments for the stabilization of the thoracolumbar spine, as well as deformity specific instrumentation and implants that are designed to enable the surgeon to address patient-specific spinal deformity correction procedures.

Cervical and Cervico-Thoracic Products

Trestle Luxe Anterior Cervical Plate System. The Trestle Luxe Anterior Cervical Plate System has a large window that enables the surgeon to have improved graft site and end plate visualization, which is designed to allow for better placement of the plate. The Trestle Luxe Anterior Cervical Plate System also has a low-profile design. Low-profile cervical plates are intended to reduce the irritation of the tissue adjacent to the plate following surgery. Other key features of the Trestle Luxe Anterior Cervical Plate System include a self-retaining screw-locking mechanism that is designed to ensure quick and easy locking of the plate and a flush profile after the screws are inserted.

Solanas Posterior Cervico/Thoracic Fixation System and Avalon Occipital Plate. Alphatec’s Solanas Posterior Cervico/Thoracic Fixation System consists of rods, polyaxial screws, hooks, and connectors that provide a solution for posterior cervico/thoracic fusion procedures. The Solanas Posterior Cervico/Thoracic System is designed to be used in combination with the Zodiac Degenerative Spinal Fixation System and the Avalon Occipital Plate, thereby providing surgeons with a solution for occipito-cervico-thoracic fixation. The Avalon Occipital Plate has a unique buttress design for optimal bone graft placement and superior fusion, including three points of plate rotation and translation, which is designed to ease the placement of the plate.

Interbody Systems

Battalion Universal Spacer System. The Battalion Universal Spacer System offers comfort, control and innovative design for surgeons performing PLIF and TLIF procedures. The Battalion implants introduce a new alternative to interbody fusion by combining the elasticity and radiolucency of polyetheretherketone, or PEEK, with a titanium coating for potential osseointegration. The implants, which come in both a straight and curved footprint, feature a bulleted nose for easy insertion and distraction of the disc space. The Battalion Universal Spacer System also features an intuitive and innovative 180-degree locking inserter that assists with protection of neural elements during insertion of the implant. The Battalion Universal Spacer System also features state-of-the-art instrumentation for access, disc preparation, and implant insertion.

Novel PEEK and Titanium Spinal Spacers. Our family of Novel spinal spacers addresses the surgical need to accommodate varying patient anatomies, surgical approaches and composite material options. The system offers multiple unique implant designs, in numerous shapes and heights, and in both. titanium and PEEK.

4

---

Alphatec Solus Locking ALIF Spinal Spacer. The Alphatec Solus locking ALIF spinal spacer, or Alphatec Solus, is a zero-profile PEEK and titanium device offering four points of fixation for improved stability. Alphatec Solus features a one-step insertion and deployment feature and is used in ALIF procedures.

Biologics

AlphaGraft Structural Allograft Spacers. Alphatec offers a broad portfolio of allograft spacers available in a wide range of shapes and sizes, each with corresponding instrumentation, which are intended for use in the cervical, thoracic, and lumbar regions of the spine. In addition, many of our allograft spacers are packaged in our vacuum-infusion packaging system, or VIP System. The VIP System is a packaging and fluid delivery system that allows for fast and efficient infusion of the surgeon’s choice of hydration fluid. The VIP System provides rapid and uniform hydration, which may reduce the brittleness of the graft and shorten the length of the surgical procedure.

AlphaGraft ProFuse Demineralized Bone Scaffold. Our AlphaGraft ProFuse Demineralized Bone Scaffold consists of a sponge-like demineralized bone matrix that has been pre-cut into sizes to fit within a spinal spacer. The AlphaGraft ProFuse Demineralized Bone Scaffold provides a natural scaffold derived entirely from bone that can be placed into a void within a spinal spacer or on top of a spinal spacer. The sponge-like qualities of the scaffold allow a surgeon to compress the scaffold and place it into a small space. Following placement, the scaffold expands for maximum contact between the spinal spacer and the endplate of the vertebral body and is designed to promote fusion. The AlphaGraft ProFuse Demineralized Bone Scaffold is pre-packaged in our proprietary VIP System.

Amnioshield Amniotic Tissue Barrier. Our Amnioshield Amniotic Tissue Barrier is an allograft for spinal surgical barrier applications. The composite amniotic membrane reduces inflammation and enhances healing at the surgical site, reduces scar tissue formation and provides an excellent dissection plane.

Alphagraft Demineralized Bone Matrix. Our Alphagraft Demineralized Bone Matrix consists of demineralized human tissue that is mixed with a bioabsorbable carrier and intended for use in surgery for bone grafting.

Neocore Osteoconductive Matrix. Our Neocore Osteoconductive Matrix is designed to provide an effective core environment for bone growth through a synthetic scaffold. When hydrated with patient bone marrow aspirate, or BMA, Neocore becomes a complete bone graft, which possesses all the necessary components of bone growth. Engineered to perform like natural bone, Neocore’s composition and porosity provide the benefits of rapid revascularization throughout graft and supports replacement of three-dimensional matrix with healthy new bone growth. Offering excellent handling characteristics, these pre-formed strips are flexible to conform to adjacent structures, compressible, and moldable.

Products and Technologies in Limited Release or Under Development

Alpha Informatix Platform. Alpha Informatix is our platform for providing surgeons with intra-operative information that is objective, real-time, and actionable. Our first release from the Alpha Informatix Platform is our advanced neuromonitoring solution, which is designed to prevent the intraoperative risk of nerve injury with automated assessment of nerve health. We acquired this technology through our acquisition of SafeOp Surgical, Inc., or SafeOp. SafeOp has developed patented technology that automates Somatosensory Evoked Potentials, or SSEPs, designed to provide surgeons with unprecedented, objective feedback during surgery. We received FDA clearance for our SafeOp neuromonitoring system and released it for alpha evaluation in February 2019.  We expect full commercial launch of the system in Spring 2019.

We are developing next-generation access systems, implants, and biologics that will seamlessly integrate into the Alpha Informatix Platform to enable elegant, minimally disruptive spine access that achieves clinical success regardless of the surgical approach.

IdentiTi Porous Titanium Interbody Implants. During 2018 we developed our procedure-specific IdentiTi Porous Ti Interbody System, a collection of porous titanium interbody implants for Anterior Cervical Discectomy and Fusion, or ACDF, TLIF, PLIF and Anterior Lumbar Interbody Fusion, or ALIF procedures, and lateral interbody fusion, or LIF.

Our IdentiTi Porous Ti Interbody Systems offer implant options that take advantage of bone’s affinity for titanium. Because of their porosity, IdentiTi implants have a surface roughness that enhances stability.  The implants are also designed to provide the biological, biomechanical, and imaging characteristics that surgeons seek in a fusion construct.

 

5

---

Key features include: 

 

We commercially launched IdentiTi-C for ACDF in March 2019, the first of six planned commercial launches.  The remaining five IdentiTi implant systems are currently available in alpha evaluation with expected commercial launches beginning in the second quarter of 2019.

OsseoScrew System. In September 2018, we received 510(k) clearance from the FDA for OsseoScrew, a unique, next-generation expandable posterior fixation implant. OsseoScrew (for use with the Zodiac Spinal Fixation System and Illico MIS Posterior Fixation System) is intended to restore the integrity of the spinal column even in the absence of fusion for a limited time period in patients with advanced stage tumors involving the thoracic and lumbar spine in whom life expectancy is of insufficient duration to permit achievement of fusion. OsseoScrew has been clinically proven to increase pullout and holding strength, improving fixation in the bone-implant interface by 29%, as compared to conventional pedicle screws. It performs comparably to cemented fenestrated screws without the risk associated with cement leakage. OsseoScrew has performed successfully in international markets. OsseoScrew is undergoing an alpha evaluation in the US market with a targeted commercial launch in 2019.

Thoracolumbar Spinal Fixation System. In September of 2018 we received 510(k) clearance for our next-generation Thoracolumbar Spinal Fixation System, our comprehensive spinal fixation solution, designed to treat a range of spinal pathologies, with intraoperative adaptability and surgical efficiency, through an OPEN, MIS or Hybrid approach. The Thoracolumbar Spinal Fixation System provides surgeons with a unique lock screw design that potentially reduces head splay and cross threading.  Additionally, the Thoracolumbar Spinal Fixation System includes a wide variety of low-profile implants providing a better anatomical fit and increased ability to address patient pathologies, ergonomically designed instrumentation to improve surgical efficiency and comfort during complex surgeries, and proven biomechanical strength necessary to achieve a solid fusion.  We initiated a limited alpha release in November 2018 and expect a targeted commercial launch in the second half of 2019.

Research and Development

Our research and development department seeks to continually improve our core product offering and introduce new products to increase our penetration in the U.S. spine market. We are focused on developing technology platforms and products that span the largest market segments addressing degenerative and deformity spine pathologies. We have transformed our development process by focusing our development programs and leveraging integrated teams to reduce the time frame from product concept to market commercialization. We also collaborate with our surgeon partners to design products to enhance the surgeon experience, simplify surgical techniques, and reduce overall costs, while improving patient outcomes. Most of our product development efforts are fully integrated in one facility, allowing us to bring products from concept to market rapidly responding to surgeon and patient needs. Our resources include a technology advancement cell for rapid prototyping, a cadaveric lab, and mechanical testing laboratory.

Sales and Marketing

We market and sell our products through a sales force consisting of dedicated and non-dedicated independent distributors and dedicated employee direct sales representatives. We employ a team of area vice-presidents, or AVP’s, and regional business managers, or RBMs, who are responsible for overseeing the overall sales channel process in their territories. Although surgeons in the U.S. typically make the ultimate decision to use our products, we generally bill the hospital for the products that are used and pay commissions to the sales representative or the sales agent based on payment received from the hospital. We compensate our direct sales employees, AVP’s and RBMs through salaries and incentive bonuses based on performance measures.

We are currently in the process of making significant changes to drive a more dedicated and loyal sales channel, including; (i) moving many of our existing distributor relationships to more dedicated partnerships; and (ii) attracting new, high-quality dedicated distributors. We believe these changes will provide us with opportunities for future growth as we secure more dedicated distribution partners that can further penetrate existing and new geographic markets.

6

---

We evaluate and select our distribution partners and sales employees based upon their expertise in selling spinal devices, reputation within the surgeon community, geographical coverage and established sales network.

We also employ a national accounts team that is responsible for securing access at hospitals and GPOs, across the U.S. We have had strong success with securing access to hospitals and GPOs. We believe this access is a key differentiator for us and much of our current business is achieved through these accounts. We will continue to focus our efforts and investment on developing and maintaining relationships with key GPOs and hospital networks to secure favorable contracts and develop strategies to convert or grow business within existing accounts.

We market our products at various industry conferences, organized surgical training courses, and in industry trade journals and periodicals.

Surgeon Training and Education

We focus our surgeon training efforts on delivering critical technical skills needed on the entire spinal fusion procedure through a peer-to-peer approach to qualified surgeon customers. Well-timed surgeon education programs drive customer conversion and loyalty through leadership and excellence by focusing on delivering value through improved surgeon outcomes. We devote significant resources to training and education and are committed to a culture of scientific excellence and ethics.

We believe that one of the most effective ways to introduce and build market demand for our products is by training and educating spine surgeons, independent distributors, and direct sales representatives in the benefits and use of our products. Sales training programs will be a platform for learning and organizational development, ensuring the sales force is clinically competitive and considered an essential resource to all stakeholders. We focus on cross functional collaboration and alignment to deliver timely and relevant programs to meet surgeon and representative needs and positively impact the business.

Our training and education programs are designed to support new product introductions to the market as well as ongoing portfolio advancement. Our resources are nimble and responsive and include field based engagements to supplement our core curriculum. We believe this is an effective way to increase overall surgeon adoption of our new products.

We believe that surgeons, independent distributors, and direct sales representatives will become exposed to the merits and distinguishing features of our products through our training and education programs, and that such exposure will increase the use and promotion of our products. With a focus on the entire procedure, we expect to build awareness of the breadth of our product offering. We are conscientious in the pursuit of delivering value to all stakeholders. Our goal is to provide surgeon education programs coupled with a growing and comprehensive sales training platform that create a sustainable competitive advantage for our organization.

Manufacture and Supply

We rely on third-party suppliers for the manufacture of all our implants and instruments. Outsourcing implant manufacturing reduces our need for capital investment and reduces operational expense. Additionally, outsourcing provides expertise and capacity necessary to scale up or down based on demand for our products. We select our suppliers to ensure that all of our products are safe, effective, adhere to all applicable regulations, are of the highest quality, and meet our supply needs. We employ a rigorous supplier assessment, qualification, and selection process targeted to suppliers that meet the requirements of the U.S. Food and Drug Administration, or FDA, and International Organization for Standardization, or ISO, and quality standards supported by internal policies and procedures. Our quality assurance process monitors and maintains supplier performance through qualification and periodic supplier reviews and audits.

The raw materials used in the manufacture of our non-biologic products are principally titanium, titanium alloys, stainless steel, cobalt chrome, ceramic, allograft, and PEEK. None of our raw material requirements is limited to any significant extent by critical supply. We believe our supplier relationships and quality processes will support our potential capacity needs for the foreseeable future.

With respect to biologics products, we are FDA-registered and licensed in the states of California, New York, and Florida, the only states that currently require licenses. Our facility and the facilities of the third-party suppliers we use are subject to periodic unannounced inspections by regulatory authorities and may undergo compliance inspections conducted by the FDA and corresponding state and foreign agencies. Because our biologics products are processed from human tissue, maintaining a steady supply can sometimes be challenging. We have not experienced significant difficulty in locating and obtaining the materials necessary to fulfill our production requirements, and we have not experienced a meaningful disruption to sales orders.

In connection with the sale of our international business to Globus in September 2016, we and Globus entered into a product manufacture and supply agreement, or the Supply Agreement, pursuant to which, at agreed-upon prices, we agreed to supply to Globus certain of our implants and instruments that at the time were being offered for sale by us outside of the United States. Pursuant

7

---

to the Supply Agreement, we are responsible for ensuring that all of the products delivered to Globus meet all agreed-upon specifications for such products. The initial term of the Supply Agreement expires in September 2019, and Globus has the right to renew the Supply Agreement for two additional 12-month periods, subject to Globus meeting certain purchase requirements. We have agreed to not market and sell spinal implant products outside of the United States for a period ending two years following the termination of the Supply Agreement.

Competition

Although we believe that our current broad product portfolio and development pipeline is differentiated and has numerous competitive advantages, the spinal implant industry is highly competitive, subject to rapid technological change, and significantly affected by new product introductions. We believe that the principal competitive factors in our market include:

 

 

Both our currently marketed products and any future products we commercialize are subject to intense competition. We believe that our most significant competitors are Medtronic, Johnson & Johnson (DePuy/Synthes), Stryker, NuVasive, Zimmer Biomet, Globus and others, many of which have substantially greater financial resources than we do. In addition, these companies may have more established distribution networks, entrenched relationships with physicians and greater experience in developing, launching, marketing, distributing and selling spinal implant products.

Some of our competitors also provide non-operative therapies for spine disorder conditions. While these non-operative treatments are considered to be an alternative to surgery, surgery is typically performed in the event that non-operative treatments are unsuccessful. We believe that, to date, these non-operative treatments have not caused a material reduction in the demand for surgical treatment of spinal disorders.

Intellectual Property

We rely on a combination of patent, trademark, copyright, trade secret and other intellectual property laws, nondisclosure agreements, proprietary information ownership agreements and other measures to protect our intellectual property rights. We believe that in order to have a competitive advantage, we must develop, maintain and enforce the proprietary aspects of our technologies. We require our employees, consultants, co-developers, distributors and advisors to execute agreements governing the ownership of proprietary information and use and disclosure of confidential information in connection with their relationship with us. In general, these agreements require these individuals and entities to agree to disclose and assign to us all inventions that were conceived on our behalf or which relate to our property or business and to keep our confidential information confidential and only use such confidential information in connection with our business.

Patents. As of March 25, 2019, we and our affiliates owned, or we exclusively owned, 139 issued U.S. patents, 37 pending U.S. patent applications and 163 issued or pending foreign patents. We own multiple patents relating to unique aspects and improvements for several of our products. We do not believe that the expiration of any single patent is likely to significantly affect our intellectual property position.

Trademarks. As of March 25, 2019, we and our affiliates owned 25 registered U.S. trademarks and 9 registered trademarks outside of the U.S.

8

---

Government Regulation

Our products are subject to extensive regulation by the FDA and other U.S. federal and state regulatory bodies and comparable authorities in other countries. Our products are subject to regulation under the Federal Food, Drug, and Cosmetic Act, or FDCA, and in the case of our tissue products, also under the Public Health Service Act, or PHSA. To ensure that our products are safe and effective for their intended use, the FDA regulates, among other things, the following activities that we or our partners perform and will continue to perform:

 

Government Regulation—Medical Devices

FDA’s Premarket Clearance and Approval Requirements. Unless an exemption applies, each medical device we seek to commercially distribute in the United States requires either FDA clearance of a premarket notification requesting permission for commercial distribution under Section 510(k) of the Federal Food, Drug and Cosmetic Act, or FDCA, also referred to as a 510(k) clearance, or approval of a premarket approval application, or PMA. The information that must be submitted to the FDA in order to obtain clearance or approval to market a new medical device varies depending on how the medical device is classified by the FDA. Under the FDCA medical devices are classified as Class I, Class II or Class III depending on the degree of risk associated with the use of the device and the extent of manufacturer and regulatory controls deemed to be necessary by the FDA to reasonably ensure their safety and effectiveness.

Class I devices are those with the lowest risk to the patient for which safety and effectiveness can be reasonably assured by adherence to a set of regulations, referred to as General Controls, which require compliance with the applicable portions of the FDA’s Quality System Regulation, or QSR, facility registration and product listing, reporting of adverse events and malfunctions, and appropriate, truthful and non-misleading labeling and promotional materials. Some Class I devices also require 510(k) clearance by the FDA, though most Class I devices are exempt from the premarket notification requirements. Class II devices are those that are subject to the General Controls, as well as Special Controls, which can include performance standards, product-specific guidance documents and post-market surveillance. Manufacturers of most Class II devices are required to submit to the FDA a premarket notification under Section 510(k) of the FDCA. Class III devices include devices deemed by the FDA to pose the greatest risk such as life-supporting or life-sustaining devices, or implantable devices, in addition to those deemed not substantially equivalent following the 510(k) process. The safety and effectiveness of Class III devices cannot be reasonably assured solely by compliance with the General Controls and Special Controls described above. Therefore, these devices must be the subject of an approved PMA. Both 510(k)s and PMAs are subject to the payment of user fees at the time of submission for FDA review.

If the FDA determines that the device is not “substantially equivalent” to a predicate device following submission and review of a 510(k) premarket notification, or if the manufacturer is unable to identify an appropriate predicate device and the new device or new use of the device presents a moderate or low risk, the device sponsor may either pursue a PMA approval or seek reclassification of the device through the de novo process. The products we currently market in the U.S. are Class II devices marketed under FDA 510(k) clearance.

510(k) Clearance Pathway. To obtain 510(k) clearance, we must submit a 510(k) premarket notification demonstrating that the proposed device is substantially equivalent to a device legally marketed in the United States. A predicate device is a legally marketed device that is not subject to premarket approval, i.e., a device that was legally marketed prior to May 28, 1976 (pre-amendments device) and for which a PMA is not required, a device that has been reclassified from Class III to Class II or I, or a device that was

9

---

found substantially equivalent through the 510(k) clearance process. To be “substantially equivalent,” the proposed device must have the same intended use as the predicate device, and either have the same technological characteristics as the predicate device or have different technological characteristics and not raise different questions of safety or effectiveness than the predicate device. Clinical data is sometimes required to support substantial equivalence.

The FDA’s goal is to review and act on each 510(k) premarket notification within 90 days of submission, but the process usually takes from nine to 12 months, and it may take longer if the FDA requests additional information. Most 510(k)s premarket clearances do not require supporting data from clinical trials, but the FDA may request such data. If the FDA agrees that the device is substantially equivalent, it will grant clearance to commercially market the device.

After a device receives 510(k) clearance, any modification that could significantly affect its safety or effectiveness, or that would constitute a new or major change in its intended use, will require a new 510(k) clearance or, depending on the modification, require premarket approval. The FDA requires each manufacturer to determine whether the proposed change requires the submission of a 510(k) or premarket notification PMA, but the FDA can review any such decision and can disagree with a manufacturer’s determination. If the FDA disagrees with a manufacturer’s determination, the FDA can require the manufacturer to cease marketing and/or recall the modified device until 510(k) clearance or PMA is obtained. If the FDA requires us to seek a new 510(k) clearance or PMA for any modifications to a previously cleared product, we may be required to cease marketing or recall the modified device until we obtain this clearance or approval. Also, in these circumstances, we may be subject to significant fines or penalties. We have made and plan to continue to make enhancements to our products for which we have not submitted 510(k)s, premarket notifications or PMAs, and we will consider on a case-by-case basis whether a new 510(k) premarket notification or PMA is necessary.

The FDA began to consider proposals to reform its 510(k) clearance process in 2011, and such proposals could include increased requirements for clinical data and a longer review period. Specifically, in response to industry and healthcare provider concerns regarding the predictability, consistency and rigor of the 510(k) regulatory pathway, the FDA initiated an evaluation of the 510(k) program, and as part of the Food and Drug Administration Safety and Innovation Act, or FDASIA, Congress reauthorized the Medical Device User Fee Amendments with various FDA performance goal commitments and enacted several “Medical Device Regulatory Improvements” and miscellaneous reforms, which are further intended to clarify and improve medical device regulation both pre- and post-clearance and approval. Further, in December 2016, the 21st Century Cures Act, or Cures Act, was signed into law. The Cures Act, among other things, is intended to modernize the regulation of devices and spur innovation, but its ultimate implementation is unclear.

Premarket Approval Pathway. Class III devices require PMA approval before they can be marketed, although some pre-amendment Class III devices for which the FDA has not yet required a PMA are cleared through the 510(k) clearance process. The PMA process is generally more complex, costly and time consuming than the 510(k) clearance process. A PMA must be supported by extensive data including, but not limited to, extensive technical information regarding device design and development, preclinical and clinical trials, manufacturing and labeling information to demonstrate to the FDA’s satisfaction the safety and effectiveness of the device for its intended use. The PMA application must provide valid scientific evidence that demonstrates to the FDA’s satisfaction reasonable assurance of the safety and effectiveness of the device for its intended use. Following receipt of a PMA approval, the FDA determines whether the application is sufficiently complete to permit a substantive review. If the FDA accepts the application for review, it has 180 days under the FDCA to complete its review of the PMA, although in practice, the FDA’s review often takes significantly longer, and can take up to several years. During this review period, the FDA may request additional information or clarification of information already provided, and the FDA may issue a major deficiency letter to the applicant, requesting the applicant’s response to deficiencies communicated by the FDA. Also during the review period, an advisory panel of experts from outside the FDA may be convened to review and evaluate the application and provide recommendations to the FDA as to the approvability of the device. The FDA may or may not accept the panel’s recommendation. In addition, the FDA will conduct a preapproval inspection of the manufacturing facility to ensure compliance with quality system regulation, or QSR. The PMA approval process can be expensive, uncertain and lengthy, and a number of devices for which FDA approval has been sought by other companies have never been approved by the FDA for marketing.

Clinical Trials. Clinical trials are almost always required to support a PMA and are sometimes required for a 510(k) premarket notification. All clinical investigations of investigational devices to determine safety and effectiveness must be conducted in accordance with the FDA’s investigational device exemption, or IDE, regulations which govern investigational device labeling, prohibit promotion of the investigational device, and specify an array of recordkeeping, reporting and monitoring responsibilities of study sponsors and study investigators. If the device is determined to present a “significant risk” to human health, the manufacturer may not begin a clinical trial until it submits an IDE application to the FDA and obtains approval of the IDE from the FDA. The IDE application must be supported by appropriate data, such as animal and laboratory testing results, showing that it is safe to test the device in humans and that the testing protocol is scientifically sound. In addition, the study must be approved by, and conducted under the oversight of, an Institutional Review Board, or IRB, for each clinical site. The IRB is responsible for the initial and continuing review of the IDE application, and may pose additional requirements for the conduct of the study. If an IDE application is approved by the FDA and one or more IRBs, human clinical trials may begin at a specific number of investigational sites with a specific number of patients, as approved by the FDA. If the device presents a non-significant risk to the patient, a sponsor may begin the clinical trial after obtaining approval for the trial by one or more IRBs without separate approval from the FDA, but must still follow abbreviated IDE

10

---

requirements, such as monitoring the investigation, ensuring that the investigators obtain informed consent, and labeling and record-keeping requirements. A clinical trial may be suspended by FDA, the sponsor or an IRB at any time for various reasons, including a belief that the risks to the study participants outweigh the benefits of participation in the trial. Even if a clinical trial is completed, the results may not demonstrate the safety and efficacy of a device to the satisfaction of the FDA, or may be equivocal or otherwise not be sufficient to obtain approval of a device.

Pervasive and Continuing FDA Regulation. After a device is placed on the market, numerous FDA and other regulatory requirements continue to apply. These include:

 

Failure to comply with applicable regulatory requirements can result in enforcement action by the FDA, which may include any of the following:

 

 

Our facilities, records and manufacturing processes are subject to periodic announced and unannounced inspections by the FDA to evaluate compliance with applicable regulatory requirements.

Regulation of Human Cells, Tissues, and Cellular and Tissue-based Products. Certain of our products are regulated as human cells, tissues, and cellular and tissue-based products, or HCT/Ps. Section 361 of the PHSA authorizes the FDA to issue regulations to prevent the introduction, transmission or spread of communicable disease. HCT/Ps regulated as “361” HCT/Ps are subject to requirements relating to registering facilities and listing products with the FDA, screening and testing for tissue donor eligibility, or Good Tissue Practice, when processing, storing, labeling, and distributing HCT/Ps, including required labeling information, stringent record keeping, and adverse event reporting, among other applicable requirements and laws. If the HCT/P is minimally manipulated, is intended for homologous use only and meets other requirements, the HCT/P will not require 510(k) clearance, PMA approval, a Biologics License Applications, or other premarket authorization from the FDA before marketing.

11

---

Environmental Matters

Our facilities and operations are subject to extensive federal, state, and local environmental and occupational health and safety laws and regulations. These laws and regulations govern, among other things, air emissions; wastewater discharges; the generation, storage, handling, use and transportation of hazardous materials; the handling and disposal of hazardous wastes; the cleanup of contamination; and the health and safety of our employees. Under such laws and regulations, we are required to obtain permits from governmental authorities for some of our operations. If we violate or fail to comply with these laws, regulations or permits, we could be fined or otherwise sanctioned by regulators. We could also be held responsible for costs and damages arising from any contamination at our past or present facilities or at third-party waste disposal sites. We cannot completely eliminate the risk of contamination or injury resulting from hazardous materials, and we may incur material liability as a result of any contamination or injury.

Compliance with Certain Applicable Statutes

We are subject to various federal and state laws pertaining to healthcare fraud and abuse, including anti-kickback laws, false claims laws, criminal health care fraud laws, physician payment transparency laws, data privacy and security laws and foreign corrupt practice laws. Violations of these laws are punishable by criminal and/or civil sanctions, including, in some instances, fines, imprisonment and, within the United States, exclusion from participation in government healthcare programs, including Medicare, Medicaid and Veterans Administration health programs. These laws are administered by, among others, the U.S. Department of Justice, the Office of Inspector General of the Department of Health and Human Services and state attorneys general. Many of these agencies have increased their enforcement activities with respect to medical device manufacturers in recent years.

The federal Anti-Kickback Statute, prohibits persons from knowingly and willfully soliciting, offering, receiving or providing remuneration, directly or indirectly, in exchange for or to induce either the referral of an individual, or the furnishing, arranging for or recommending a good or service, for which payment may be made in whole or part under federal healthcare programs, such as the Medicare and Medicaid programs. The Anti-Kickback Statute is broad and prohibits many arrangements and practices that are lawful in businesses outside of the healthcare industry. For example, the definition of “remuneration” has been broadly interpreted to include anything of value, including, gifts, discounts, the furnishing of supplies or equipment, credit arrangements, payments of cash, waivers of payments, ownership interests and providing anything at less than its fair market value. In addition, the Patient Protection and Affordable Health Care Act, which, as amended by the Health Care and Education Reconciliation Act, and collectively referred to as ACA. ACA, among other things, amends the intent requirement of the federal Anti-Kickback Statute. A person or entity no longer needs to have actual knowledge of this statute or specific intent to violate it. In addition, ACA provides that the government may assert that a claim including items or services resulting from a violation of the Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the federal False Claims Act.

In implementing the Anti-Kickback Statute, the Department of Health and Human Services Office of Inspector General, or OIG, has issued a series of regulations, known as the safe harbors, which began in July 1991. These safe harbors set forth provisions that, in circumstances where all the applicable requirements are met, will assure healthcare providers and other parties that they will not be prosecuted under the Anti-Kickback Statute. The failure of a transaction or arrangement to fit precisely within one or more safe harbors does not necessarily mean that it is illegal or that prosecution will be pursued. However, conduct and business arrangements that do not fully satisfy all requirements of an applicable safe harbor may result in increased scrutiny by government enforcement authorities such as the OIG. Penalties for violations of the Anti-Kickback Statute include criminal penalties and civil sanctions such as fines, imprisonment and possible exclusion from Medicare, Medicaid and other federal healthcare programs. Many states have anti-kickback laws that are similar to the federal law, some of which apply to the referral of patients for healthcare items or services reimbursed by any source, and may also result in penalties, fines, sanctions for violations, and exclusions from state or commercial programs.

We have entered into various agreements with certain surgeons that perform services for us, including some who make clinical decisions to use our products. Some of our referring surgeons own our stock, which they received from us as consideration for services performed. From time to time, we review these arrangements to determine whether they are in compliance with applicable laws and regulations. In addition, physician-owned distribution companies, or PODs, have increasingly become involved in the sale and distribution of medical devices, including products for the surgical treatment of spine disorders. In many cases, these distribution companies enter into arrangements with hospitals that bill Medicare or Medicaid for the furnishing of medical services, and the physician-owners are among the physicians who refer patients to the hospitals for surgery. On March 26, 2013 the OIG issued a Special Fraud Alert entitled “Physician-Owned Entities”, in which the OIG concluded, among other things, that PODs are “inherently suspect under the anti-kickback statute” and that PODs present “substantial fraud and abuse risk and pose dangers of patient safety.” Since 2013, the OIG has further increased its scrutiny of PODs and the Department of Justice has brought several high-profile cases against physician owners.

12

---

The federal False Claims Act prohibits persons from knowingly filing or causing to be filed a false or fraudulent claim to, or the knowing use of false statements to obtain payment from, the federal government. Private suits filed under the False Claims Act, known as qui tam actions, can be brought by individuals on behalf of the government. These individuals, sometimes known as “relators” or, more commonly, as “whistleblowers,” may share in any amounts paid by the entity to the government in fines or settlement. The number of filings of qui tam actions has increased significantly in recent years, causing more healthcare companies to have to defend a False Claim Act action. If an entity is determined to have violated the federal False Claims Act, it may be required to pay up to three times the actual damages sustained by the government, plus civil penalties of between $10,000 to $22,000 for each separate false claim and may be subject to exclusion from Medicare, Medicaid and other federal healthcare programs. Various states have also enacted similar laws modeled after the federal False Claims Act which apply to items and services reimbursed under Medicaid and other state programs, or, in several states, apply regardless of the payer.

The Health Insurance Portability and Accountability Act, or HIPAA, created two new federal crimes: healthcare fraud and false statements relating to healthcare matters. The healthcare fraud statute prohibits knowingly and willfully executing a scheme to defraud any healthcare benefit program, including private payers. The ACA changed the intent requirement of the healthcare fraud statute to such that a person or entity no longer needs to have actual knowledge of this statute or specific intent to violate it. A violation of this statute is a felony and may result in fines, imprisonment or possible exclusion from Medicare, Medicaid and other federal healthcare programs. The false statements statute prohibits knowingly and willfully falsifying, concealing or covering up a material fact or making any materially false, fictitious or fraudulent statement in connection with the delivery of or payment for healthcare benefits, items or services. A violation of this statute is a felony and may result in similar sanctions.

ACA also includes various provisions designed to strengthen significantly fraud and abuse enforcement in addition to those changes discussed above. Among these additional provisions include increased funding for enforcement efforts and new “sunshine” provisions to require us to report and disclose to the Centers for Medicare and Medicaid Services, or CMS, any payment or “transfer of value” made or distributed to physicians or teaching hospitals. These sunshine provisions also require certain GPOs, including physician-owned distributors, to disclose physician ownership information to CMS. We and other device manufacturers are required to collect and annually report specific data on payments and other transfers of value to physicians and teaching hospitals. There are various state laws and initiatives that require device manufacturers to disclose to the appropriate regulatory agency certain payments or other transfers of value made to physicians, and in certain cases prohibit some forms of these payments, with the risk of fines for any violation of such requirements.

HIPAA also includes privacy and security provisions designed to regulate the use and disclosure of “protected health information”, or PHI, which is health information that identifies a patient and that is held by a health care provider, a health plan or health care clearinghouse. We are not directly regulated by HIPAA, but our ability to access PHI for purposes such as marketing, product development, clinical research or other uses is controlled by HIPAA and restrictions placed on health care providers and other covered entities. HIPAA was amended in 2009 by the Health Information Technology for Economic and Clinical Health Act, or HITECH, which strengthened the rule, increased penalties for violations and added a requirement for the disclosure of breaches to affected individuals, the government and in some cases the media. We must carefully structure any transaction involving PHI to avoid violation of HIPAA and HITECH requirements.

Almost all states have adopted data security laws protecting personal information including social security numbers, state issued identification numbers, credit card or financial account information coupled with individuals’ names or initials. We must comply with all applicable state data security laws, even though they vary extensively, and must ensure that any breaches or accidental disclosures of personal information are promptly reported to affected individuals and responsible government entities. We must also ensure that we maintain compliant, written information security programs or run the risk of civil or even criminal sanctions for non-compliance as well as reputational harm for publicly reported breaches or violations.

If any of our operations are found to have violated or be in violation of any of the laws described above and other applicable state and federal fraud and abuse laws, we may be subject to penalties, among them being civil and criminal penalties, damages, fines, exclusion from government healthcare programs, and the curtailment or restructuring of our operations.

Third-Party Reimbursement

In the U.S., healthcare providers generally rely on third-party payers, principally private insurers and governmental payers such as Medicare and Medicaid, to cover and pay for all or part of the cost of a spine surgery in which our medical devices are used. We expect that sales volumes and prices of our products will depend in large part on the continued availability of reimbursement from such third-party payers. These third-party payers may deny reimbursement if they determine that a device used in a procedure was not medically necessary in accordance with cost-effective treatment methods, as determined by the third-party payer, or was used for an unapproved indication. Particularly in the U.S., third-party payers continue to carefully review, and increasingly challenge, the prices charged for procedures and medical products. Medicare coverage and reimbursement policies are developed by CMS, the federal agency responsible for administering the Medicare program, and its contractors. CMS establishes these Medicare policies for medical

13

---

products and procedures and such policies are periodically reviewed and updated. While private payers vary in their coverage and payment policies, the Medicare program is viewed as a benchmark. Medicare payment rates for the same or similar procedures vary due to geographic location, nature of the facility in which the procedure is performed (i.e., teaching or community hospital) and other factors. We cannot assure you that government or private third-party payers will cover and provide adequate payment for the procedures in which our products are used. ACA and other reform proposals contain significant changes regarding Medicare, Medicaid and other third party payers.

Among these changes was the imposition of a 2.3% excise tax on domestic sales of medical devices that went into effect on January 1, 2013. This tax has resulted in a significant increase in the tax burden on our industry. In December 2015, the U.S. Congress adopted and President Obama signed into law the Consolidated Appropriations Act of 2016. Among other things, this legislation put in place a two-year moratorium on the device tax through the end of 2017. The moratorium was extended to an additional two years beginning January 1, 2018 and ending December 31, 2019. Other elements of the ACA include numerous provisions to limit Medicare spending through reductions in various fee schedule payments and by instituting more sweeping payment reforms, such as bundled payments for episodes of care, the establishment of “accountable care organizations” under which hospitals and physicians will be able to share savings that result from cost control efforts, comparative effectiveness research, value-based purchasing, and the establishment of an independent payment advisory board.

We expect that political forces, including presidential administration and party control of the House of Representatives, the Senate and even State-level elections, could shift health policy, including potential to modify, repeal, or otherwise invalidate all, or certain provisions of, the ACA or other healthcare regulations. Since its enactment, there have also been other judicial and Congressional challenges to certain aspects of the ACA. As a result, there have been delays in the implementation of, and action taken to repeal or replace, certain aspects of the ACA. In March 2017, the House of Representatives introduced legislation known as the American Health Care Act, or the AHCA, which, if enacted, would amend or repeal significant portions of the ACA. Among other changes, the AHCA, would repeal the medical device tax, eliminate penalties on individuals and employers that fail to maintain or provide minimum essential coverage and create refundable tax credits to assist individuals in buying health insurance. The AHCA would also make significant changes to Medicaid by, among other things, making Medicaid expansion optional for states, repealing the requirement that state Medicaid plans provide the same essential health benefits that are required by plans available on the exchanges, modifying federal funding, including implementing a per capita cap on federal payments to states, and changing certain eligibility requirements. Given recent changes of political party control of the House of Representatives, it is uncertain when or if the provisions in the AHCA will become law, or the extent to which any such changes may impact our business.

In addition, other legislative changes have been proposed and adopted since the ACA was enacted. These changes include the Budget Control Act of 2011, which resulted in reductions to Medicare payments to providers of 2% per fiscal year, which went into effect on April 1, 2013 and will stay in effect through 2025 unless additional Congressional action is taken, as well as, the American Taxpayer Relief Act of 2012, which, among other things, further reduced Medicare payments to several types of providers, including hospitals and imaging centers, and increased the statute of limitations period for the government to recover overpayments to providers from three to five years. An expansion in government’s role in the U.S. healthcare industry may lower reimbursements for procedures using our products, reduce medical procedure volumes, and adversely affect our business and results of operations, possibly materially.

We believe that the overall escalating cost of medical products and services has led to, and will continue to lead to, increased pressures on the healthcare industry to reduce the costs of products and services. We cannot assure you that government or private third-party payers will cover and provide adequate payment for the procedures using our products. In addition, it is possible that future legislation, regulation, or reimbursement policies of third-party payers will adversely affect the demand for procedures using our products or our ability to sell our products on a profitable basis. The unavailability or inadequacy of third-party payer coverage or reimbursement could have a significant adverse effect on our business, operating results and financial condition.

Employees

As of March 25, 2019, we had 195 employees in the U.S. and Canada, approximately 159 of which were based in our Carlsbad, California headquarters, covering all of the following functional areas: sales, customer service, marketing, clinical education, advanced manufacturing, quality assurance, regulatory affairs, research and development, human resources, finance, legal, information technology and administration. We have never experienced a work stoppage due to labor difficulties and believe that our relations with our employees are good. We currently have no employees working under collective bargaining agreements.

Corporate and Available Information

We are a Delaware corporation. We were incorporated in March 2005. Our principal executive office is located at 5818 El Camino Real, Carlsbad, California 92008 and our telephone number is (760) 431-9286. Our Internet address is www.atecspine.com. We are not including the information contained on our website as a part of, or incorporating it by reference into, this Annual Report on

14

---

Form 10-K. Our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and all amendments to those reports, are available to you free of charge through the Investor Relations section of our website as soon as reasonably practicable after such materials have been electronically filed with, or furnished to, the Securities and Exchange Commission, or SEC.

Investing in our common stock involves a high degree of risk. You should carefully consider the following risk factors and all other information contained or incorporated by reference in this Annual Report on Form 10-K. The risks and uncertainties described below are not the only ones facing us. Additional risks and uncertainties that we are unaware of, or that we currently deem immaterial, also may become important factors that affect us. If any of such risks or the risks described below, either alone or taken together, occur, our business, financial condition or results of operations could be materially and adversely affected. In that case, the trading price of our common stock could decline, and you may lose some or all of your investment.

Risks Related to Our Business and Industry

Our business plan relies on certain assumptions pertaining to the market for our products that, if incorrect, may adversely affect our growth and profitability.

We allocate our design, development, marketing, management and financial resources based on our business plan, which includes assumptions about various demographic trends in the treatment of spine disorders and the resulting demand for our products. However, these trends are uncertain. There can be no assurance that our assumptions with respect to an aging population with broad medical coverage and longer life expectancy, which we expect to lead to increased spinal injuries and degeneration, are accurate. In addition, an increasing awareness and use of non-invasive means for the prevention and treatment of back pain and rehabilitation purposes may reduce demand for, or slow the growth of sales of, spine fusion products. A significant shift in technologies or methods used in the treatment of back pain or damaged or diseased bone and tissue could adversely affect demand for some or all of our products. For example, pharmaceutical advances could result in non-surgical treatments gaining more widespread acceptance as a viable alternative to spine fusion. The emergence of new biological or synthetic materials to facilitate regeneration of damaged or diseased bone and to repair damaged tissue could increasingly minimize or delay the need for spine fusion surgery and provide other biological alternatives to spine fusion. New surgical procedures could diminish demand for some of our products. The increased acceptance of emerging technologies that do not require spine fusion, such as artificial discs and nucleus replacement, for the surgical treatment of spine disorders would reduce demand for, or slow the growth of sales of, spine fusion products. If our assumptions regarding these factors prove to be incorrect or if alternative treatments to those offered by our products gain further acceptance, then demand for our products could be significantly less than we anticipate and we may not be able to achieve or sustain growth or profitability.

We are in a highly competitive market segment, face competition from large, well-established medical device companies with significant resources, and may not be able to compete effectively.

The market for spine fusion products and procedures is intensely competitive, subject to rapid technological change and significantly affected by new product introductions and other market activities of industry participants. In 2018, a significant percentage of global spine implant product revenues was generated by Medtronic Sofamor Danek, a subsidiary of Medtronic, Inc.; Depuy Spine, a subsidiary of Johnson & Johnson; and Stryker Spine. Our competitors also include numerous other publicly-traded companies such as NuVasive, Zimmer Biomet, Globus and SeaSpine.

Several of our competitors enjoy competitive advantages over us, including:

15

---

In addition, at any time our current competitors or other companies may develop alternative treatments, products or procedures for the treatment of spine disorders that compete directly or indirectly with our products, including ones that prove to be superior to our spine surgery products. For these reasons, we may not be able to compete successfully against our existing or potential competitors. Any such failure could lead us to modify our strategy, lower our prices, increase the commissions we pay on sales of our products and have a significant adverse effect on our business, financial condition and results of operations.

A significant percentage of our revenues are derived from the sale of our systems that include polyaxial pedicle screws.

Net sales of our systems that include polyaxial pedicle screws represented approximately 50% our net sales for both 2018 and 2017. A decline in sales of these systems, due to lower market demand, the introduction by a third party of a competitive product, an intellectual property dispute involving these systems, or otherwise, would have a significant adverse impact on our business, financial condition and results of operations. Some of the technology related to our polyaxial pedicle screw systems is licensed to us. Any action that would prevent us from manufacturing, marketing and selling our polyaxial pedicle screw systems would have a significant adverse effect on our business, financial condition and results of operations.

Our sales and marketing efforts are largely dependent upon third parties, many of which are free to market products that compete with our products.

Many of our independent distributors also market and sell the products of our competitors, and those competitors may have the ability to influence the products that our independent distributors choose to market and sell. Our competitors may be able, by offering higher commission payments or otherwise, to convince our independent distributors to terminate their relationships with us, carry fewer of our products or reduce their sales and marketing efforts for our products.

If pricing pressures cause us to decrease prices for our goods and services and we are unable to compensate for such reductions through changes in our product mix or reductions to our expenses, our results of operations will suffer.

We have experienced and may continue to experience decreasing prices for our goods and services we offer due to pricing pressure exerted by our customers in response to increased cost containment efforts from managed care organizations and other third-party payers and increased market power of our customers as the medical device industry consolidates. If we are unable to offset such price reductions through changes in our product mix or reductions in our expenses, our business, financial condition, results of operations and cash flows will be adversely affected.

To be commercially successful, we must convince the spine surgeon community that our products are an attractive alternative to our competitors’ products. If the spine surgeon community does not use our products, our sales will decline and we will be unable to increase our sales and generate profits.

In order for us to sell our products, surgeons must be convinced that our products are superior to competing products. Acceptance of our products depends on educating the spine surgeon community as to the distinctive characteristics, perceived benefits, safety and cost-effectiveness of our products compared to our competitors’ products and on training surgeons in the proper application of our products. If we are not successful in convincing the spine surgeon community of the merit of our products, our sales will decline and we will be unable to increase or achieve and sustain growth or profitability.

There is a learning process involved for spine surgeons to become proficient in the use of our products. Although most spine surgeons may have adequate knowledge on how to use most of our products based on their clinical training and experience, we believe that the most effective way to introduce and build market demand for our products is by directly training spine surgeons in the use of our products. If surgeons are not properly trained, they may misuse or ineffectively use our products. This may also result in unsatisfactory patient outcomes, patient injury, negative publicity or lawsuits against us, any of which could have a significant adverse effect on our business, financial condition and results of operations.

16

---

We must retain the current distributors of our products and attract new distributors of our products.

We plan to continue to focus on increasing our network of independent distributors. The establishment and development of a broader distribution network may be expensive and time consuming. Because of the intense competition for their services, we may be unable to recruit or retain additional qualified independent distributors. Often, our competitors enter into distribution agreements with independent distributors that require such distributors to exclusively sell the products of our competitors. Further, we may not be able to enter into agreements with independent distributors on commercially reasonable terms, if at all. Even if we do enter into agreements with additional independent distributors, it often takes 90 to 120 days for new distributors to reach full operational effectiveness and such distributors may not generate revenue as quickly as we expect them to, commit the necessary resources to effectively market and sell our products or ultimately be successful in selling our products. Our business, financial condition and results of operations will be materially adversely affected if we do not retain our existing independent distributors and attract new, additional independent distributors or if the marketing and sales efforts of our independent distributors and our own direct sales representatives are unsuccessful.

We rely on a limited number of third parties to manufacture and supply our products. Any problems experienced by any of these manufacturers could result in a delay or interruption in the supply of our products to us until such manufacturer cures the problem or until we locate and qualify an alternative source of supply.

We rely on third party suppliers for the manufacture of our implants and instruments. We currently rely on a limited number of third party suppliers and any prolonged disruption in the operations of our third party suppliers could have a significant negative impact on our ability to supply our products to customers and to perform our obligations under the Supply Agreement with Globus, and would cause us to seek additional third-party manufacturing contracts, which may not be available on acceptable terms, if at all. We may suffer losses as a result of business interruptions that exceed coverage under our manufacturer’s insurance policies. Events beyond our control, such as natural disasters, fire, sabotage or business accidents could have a significant negative impact on our operations by disrupting our product development and commercialization efforts until such third-party supplier can repair its facility or put in place third-party contract manufacturers to assume this manufacturing role, which we may not be able to do on reasonable terms, if at all. In addition, if we are required to change manufacturers for any reason, we will be required to verify that the new manufacturer maintains facilities and procedures that comply with quality standards and with all applicable regulations and guidelines. The delays associated with the verification of a new manufacturer or the re-verification of an existing manufacturer could negatively affect our ability to develop products or supply products to customers in a timely manner. Any disruption in the manufacture of our products by our third party suppliers could have a material adverse impact on our business, financial condition and results of operations.

We depend on various third-party suppliers, and in one case a single third-party supplier, for key raw materials used in the manufacturing processes for our products and the loss of any of these third-party suppliers, or their inability to supply us with adequate raw materials, could harm our business.

We use a number of raw materials, including titanium, titanium alloys, stainless steel, PEEK, and human tissue. We rely from time to time on a number of suppliers and in one case on a single source vendor, Invibio. We have a supply agreement with Invibio, pursuant to which it supplies us with PEEK, a biocompatible plastic that we use in some of our spacers. Invibio is one of a limited number of companies approved to distribute PEEK in the U.S. for use in implantable devices. During both 2018 and 2017, approximately 20% of our revenues were derived from products manufactured using PEEK.

We depend on a limited number of sources of human tissue for use in our biologics products, and any failure to obtain tissue from these sources or to have the tissue processed by these entities for us in a timely manner will interfere with our ability to meet demand for our biologics products effectively. The processing of human tissue into biologics products is labor intensive and it is therefore difficult to maintain a steady supply stream. In addition, due to seasonal changes in mortality rates, some scarce tissues used for our biologics products are at times in particularly short supply. We cannot be certain that our supply of human tissue from our current suppliers and our current inventory of biologics products will be available at current levels or will be sufficient to meet our needs.

Our dependence on a single third-party PEEK supplier and the challenges we may face in obtaining adequate supplies of biologics products involve several risks, including limited control over pricing, availability, quality and delivery schedules. In addition, any supply interruption in a limited or sole sourced component or raw material, such as PEEK or human tissue, could materially harm the ability of our third party manufacturers to manufacture our products until a new source of supply, if any, could be found. We may be unable to find a sufficient alternative supply channel in a reasonable time period or on commercially reasonable terms, if at all, which would have a significant adverse effect on our business, financial condition and results of operations.

17

---

Our tissue-based products and related technologies could become subject to significantly greater regulation by the FDA, which could disrupt our business.

The FDA regulates human cells, tissues, and cellular and tissue-based products, or HCT/Ps, but the extent to which they are regulated depends on how they are manufactured and used and whether they meet other criteria for minimal regulation. These criteria include but are not limited to the use of the HCT/Ps for homologous use only and minimal manipulation of the HCT/Ps. These HCT/Ps are regulated by the FDA solely under Section 361 of the Public Health Service Act, or PHSA, and are referred to as “Section 361 HCT/Ps,” while other HCT/Ps are subject to FDA’s regulatory requirements applicable to medical devices or biologics. Section 361 HCT/Ps do not require 510(k) clearance, PMA approval, licensure of a biologics license application, or BLA, or other premarket authorization from FDA before marketing. We believe our HCT/Ps are regulated solely under Section 361 of the PHSA, and therefore, we have not sought or obtained 510(k) clearance, PMA approval, or licensure through a BLA. The FDA could disagree with our determination that our tissue-based products are Section 361 HCT/Ps and could determine that these products are biologics requiring a BLA or medical devices requiring 510(k) clearance or PMA approval, and could require that we cease marketing such products and/or recall them pending appropriate clearance, approval or license from the FDA. If the FDA determines that any of our current or future products contain HCT/Ps that do not meet the criteria for regulation as a Section 361 HCT/P, it could subject some of our products to additional review and regulatory oversight. If this were to happen, further distribution of the affected products could be interrupted for a substantial period of time, which would reduce our revenues and hurt our profitability.

If we or our suppliers fail to comply with the FDA’s quality system and good tissue practice regulations, the manufacture of our products could be delayed.

We and our suppliers are required to comply with the FDA’s QSR, which covers, among other things, the methods and documentation of the design, testing, production, control, quality assurance, labeling, packaging, sterilization, record keeping, storage and shipping of our products. In addition, suppliers and processors of products derived from HCT must comply with the FDA’s current good tissue practice requirements, or cGTPs, which govern the methods used in and the facilities and controls used for the manufacture of HCT/Ps, record keeping and the establishment of a quality program. The FDA audits compliance with the QSR and cGTPs through inspections of manufacturing and other facilities. If we or our suppliers have significant non-compliance issues or if any corrective action plan is not sufficient, we or our suppliers could be forced to halt the manufacture of our products until such problems are corrected to the FDA’s satisfaction, which could have a material adverse effect on our business, financial condition and results of operations. Further, our products could be subject to recall if the FDA determines, for any reason, that our products are not safe or effective. Any recall or FDA requirement demanding that we seek additional approvals or clearances could result in delays, costs associated with modification of a product, loss of revenue and potential operating restrictions imposed by the FDA, all of which could have a material adverse effect on our business, financial condition and results of operations.

Healthcare policy changes, including recent federal legislation to reform the U.S. healthcare system, may have a material adverse effect on us.

In response to perceived increases in health care costs in recent years, there have been and continue to be proposals by the federal government, state governments, regulators and third-party payers to control these costs and, more generally, to reform the U.S. healthcare system. Certain of these proposals could limit the prices we are able to charge for our products or the amounts of reimbursement available for our products, limit the acceptance and availability of our products, and have a material adverse effect on our financial position and results of operations. An expansion in government’s role in the U.S. healthcare industry may lower reimbursements for procedures using our products, reduce medical procedure volumes and adversely affect our business and results of operations, possibly materially.

The demand for products and the prices at which customers and patients are willing to pay for our products depend upon the ability of our customers to obtain adequate third-party coverage and reimbursement for their purchases of our products.

Sales of our products depend in part on the availability of adequate coverage and reimbursement from governmental and private payers. In the U.S., healthcare providers that purchase our products generally rely on third-party payers, principally Medicare, Medicaid and private health insurance plans, to pay for all or a portion of the costs and fees associated with the use of our products. While procedures using our currently marketed products are eligible for reimbursement in the U.S., if surgical procedures utilizing our products are performed on an outpatient basis, it is possible that private payers may no longer provide reimbursement for the procedures using our products without further supporting data on the procedure. Any delays in obtaining, or an inability to obtain, adequate coverage or reimbursement for procedures using our products could significantly affect the acceptance of our products and have a significant adverse effect on our business. Additionally, third-party payers continue to review their coverage policies carefully for existing and new therapies and can, without notice, deny coverage for treatments that include the use of our products. Our business would be negatively impacted if there are any changes that reduce reimbursement for our products.

18

---

Furthermore, healthcare costs have risen significantly over the past decade. There have been and may continue to be proposals by legislators, regulators and third-party payers to contain these costs. Several such proposals were enacted as part of ACA, and include numerous provisions to limit Medicare spending through reductions in various fee schedule payments and sweeping payment reforms. Other federal and state cost-control measures include prospective payment systems, capitated rates, group purchasing, redesign of benefits, requiring pre-authorizations or second opinions prior to major surgery, encouragement of healthier lifestyles and exploration of more cost-effective methods of delivering healthcare. Some healthcare providers in the U.S. have adopted or are considering a managed care system in which the providers contract to provide comprehensive healthcare for a fixed cost per person. Healthcare providers may also attempt to control costs by authorizing fewer elective surgical procedures or by requiring the use of the least expensive devices possible. These cost-control methods also potentially limit the amount which healthcare providers may be willing to pay for medical devices. In addition, in the U.S., no uniform policy of coverage and reimbursement for medical technology exists among all these payers. Therefore, coverage of and reimbursement for medical technology can differ significantly from payer to payer. The continuing efforts of third-party payers, whether governmental or commercial, whether inside or outside the U.S., to contain or reduce these costs, combined with closer scrutiny of such costs, could restrict our customers’ ability to obtain adequate coverage and reimbursement from these third-party payers. The cost containment measures contained in ACA and other measures being considered at the federal and state level, as well as internationally, could harm our business by adversely affecting the demand for our products or the price at which we can sell our products.

Consolidation in the healthcare industry could lead to demands for price concessions or to the exclusion of some suppliers from certain of our markets, which could have an adverse effect on our business, financial condition or results of operations.

Because healthcare costs have risen significantly over the past decade, numerous initiatives and reforms initiated by legislators, regulators and third-party payers to curb these costs have resulted in a consolidation trend in the healthcare industry to create new companies with greater market power, including hospitals. As the healthcare industry consolidates, competition to provide products and services to industry participants has become and will continue to become more intense. This in turn has resulted and will likely continue to result in greater pricing pressures and the exclusion of certain suppliers from important market segments as group purchasing organizations, independent delivery networks and large single accounts continue to use their market power to consolidate purchasing decisions for some of our customers. We expect that market demand, government regulation, third-party reimbursement policies and societal pressures will continue to change the worldwide healthcare industry, resulting in further business consolidations and alliances among our customers, which may reduce competition, exert further downward pressure on the prices of our products and may adversely impact our business, financial condition or results of operations.

We may be subject to or otherwise affected by federal and state healthcare laws, including fraud and abuse, health information privacy and security, and disclosure laws, and could face substantial penalties if we are unable to fully comply with such laws.

Although we do not provide healthcare services, submit claims for third-party reimbursement, or receive payments directly from Medicare, Medicaid, or other third-party payers for our products or the procedures in which our products are used, healthcare regulation by federal and state governments significantly impacts our business. Healthcare fraud and abuse, health information privacy and security, and disclosure laws potentially applicable to our operations include:

19

---

ACA includes various provisions designed to strengthen significantly fraud and abuse enforcement, such as increased funding for enforcement efforts and the lowering of the intent requirement of the federal Anti-Kickback Statute and criminal healthcare fraud statute such that a person or entity no longer needs to have actual knowledge of these statutes or specific intent to violate them.

If our past or present operations, or those of our independent sales agents and distributors are found to be in violation of any of such laws or any other governmental regulations that may apply to us, we may be subject to penalties, including civil and criminal penalties, damages, fines, exclusion from federal healthcare programs and/or the curtailment or restructuring of our operations. Similarly, if the healthcare providers, sales agents, distributors or other entities with which we do business are found to be non-compliant with applicable laws, they may be subject to sanctions, which could also have a negative impact on us. Any penalties, damages, fines, curtailment or restructuring of our operations could adversely affect our ability to operate our business and our financial results. The risk of our being found in violation of these laws is increased by the fact that many of them have not been fully interpreted by the regulatory authorities or the Courts, and their provisions are open to a variety of interpretations. Any action against us for violation of these laws, even if we successfully defend against them, could cause us to incur significant legal expenses and divert our management’s attention from the operation of our business.

The sales and marketing practices of our industry have been the subject of increased scrutiny from federal and state government agencies, and we believe that this trend will continue. Prosecutorial scrutiny and governmental oversight over some major device companies regarding the retention of healthcare professionals as consultants has affected and may continue to affect the manner in which medical device companies may retain healthcare professionals as consultants. Any precautions we take to detect and prevent noncompliance with applicable laws may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to comply with these laws or regulations. Any action against us for violation of these laws, even if we successfully defend against them, could cause us to incur significant legal expenses and divert our management’s attention from the operation of our business.

If we fail to obtain, or experience significant delays in obtaining, FDA clearances or approvals for our future products or modifications to our products, our ability to commercially distribute and market our products could suffer.

Our medical devices are subject to extensive regulation by the FDA and numerous other federal, state and foreign governmental authorities. The process of obtaining regulatory clearances or approvals to market a medical device, particularly from the FDA, can be costly and time consuming, and there can be no assurance that such clearances or approvals will be granted on a timely basis, if at all. In particular, the FDA permits commercial distribution of most new medical devices only after the devices have received clearance under Section 510(k) of the Federal Food, Drug and Cosmetic Act, or 510(k), or are the subject of an approved premarket approval application, or a PMA. The 510(k) process generally takes three to nine months, but can take significantly longer, especially if the FDA requires a clinical trial to support the 510(k) application.  Currently, we do not know whether the FDA will require clinical data in support of any 510(k)s that we intend to submit for other products in our pipeline. In addition, the FDA continues to re-examine its 510(k) clearance process for medical devices and published several draft guidance documents that could change that process. Any changes that make the process more restrictive could increase the time it takes for us to obtain clearances or could make the 510(k) process unavailable for certain of our products. A PMA must be submitted to the FDA if the device cannot be cleared through the 510(k) process or is not exempt from premarket review by the FDA. A PMA must be supported by extensive data, including results of preclinical studies and clinical trials, manufacturing and control data and proposed labeling, to demonstrate to the FDA’s satisfaction the safety and effectiveness of the device for its intended use. The PMA process is more costly and uncertain than the 510(k) clearance process, and generally takes between one and three years, if not longer. In addition, any modification to a 510(k)-cleared device that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, design or manufacture, requires a new 510(k) clearance or, possibly, a PMA.

20

---

Modifications to products that are approved through a PMA application generally need FDA approval. Similarly, some modifications made to products cleared through a 510(k) may require a new 510(k).  Our commercial distribution and marketing of any products or product modifications that we develop will be delayed until regulatory clearance or approval is obtained. In addition, because we cannot assure you that any new products or any product modifications we develop will be subject to the shorter 510(k) clearance process, the regulatory approval process for our new products or product modifications may take significantly longer than anticipated. There is no assurance that the FDA will not require a new product or product modification to go through the lengthy and expensive PMA approval process. The FDA can delay, limit or deny clearance or approval of a device for many reasons, including:

Delays in obtaining regulatory clearances and approvals may:

To date, all of our non-biologic medical device products that have required FDA review that are being sold in the U.S. have been cleared through the 510(k) process without any required clinical trials. However, the FDA may require clinical data in support of any future 510(k)s or PMAs that we intend to submit for products in our pipeline. We have limited experience in performing clinical trials that might be required for a 510(k) clearance or PMA approval. If any of our products require clinical trials, the commercialization of such products could be delayed which could have a material adverse effect on our business, financial condition and results of operations.

The safety of our products is not yet supported by long-term clinical data and may therefore prove to be less safe and effective than initially thought.

We obtained clearance to offer all of our current non-biologic medical device products through the 510(k) process. The ability to obtain a 510(k) clearance is generally based on the FDA’s agreement that a new product is substantially equivalent to certain already marketed products. Because most 510(k)-cleared products were not the subject of pre-market clinical trials, surgeons may be slow to adopt our 510(k)-cleared products, we may not have the comparative data that our competitors have or are generating, and we may be subject to greater regulatory and product liability risks. With the passage of the American Recovery and Reinvestment Act of 2009, funds have been appropriated for the U.S. Department of Health and Human Services’ Healthcare Research and Quality to conduct comparative effectiveness research to determine the effectiveness of different drugs, medical devices, and procedures in treating certain conditions and diseases. Some of our products or procedures performed with our products could become the subject of such research. It is unknown what effect, if any, this research may have on our business. Further, future research or experience may indicate that treatment with our products does not improve patient outcomes or improves patient outcomes less than we initially expect. Such results would reduce demand for our products and this could cause us to withdraw our products from the market. Moreover, if future research or experience indicate that our products cause unexpected or serious complications or other unforeseen negative effects, we could be subject to significant legal liability, significant negative publicity, damage to our reputation and a dramatic reduction in sales of our products, all of which would have a material adverse effect on our business, financial condition and results of operations.

21

---

Failure to comply with post-marketing regulatory requirements could subject us to enforcement actions, including substantial penalties, and might require us to recall or withdraw a product from the market.

Once a medical device is cleared or approved, a manufacturer must notify the FDA of any modifications to the device. Any modification to a device that has received FDA clearance that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, design or manufacture, requires 510(k) clearance or possibly PMA approval. The FDA requires every manufacturer to make the determination in the first instance regarding whether a modification to a cleared or approved device necessitates the filing of a new 510(k) premarket notification or PMA supplement. The FDA may review any manufacturer's decision and can disagree. If the FDA disagrees with any future determination by us that a new 510(k) clearance or PMA approval is not required, we may need to cease marketing or to recall the modified product until and unless we obtain the clearance or approval. In addition, we could also be subject to significant regulatory fines or penalties. Any of these outcomes would harm our business.

The regulations to which we are subject are complex and have become more stringent over time. Regulatory changes could result in restrictions on our ability to continue or expand our operations, higher than anticipated costs, or lower than anticipated sales. Even after we have obtained the proper regulatory clearance or approval to market a product, we have ongoing responsibilities under FDA regulations and applicable foreign laws and regulations. The FDA’s and other regulatory authorities’ policies may change and additional government regulations may be enacted that could prevent, limit or delay regulatory approval of our product candidates. For example, the Cures Act was signed into law in December 2016.  The Cures Act, among other things, is intended to modernize the regulation of devices and spur innovation, but its ultimate implementation is unclear. The FDA, state and foreign regulatory authorities have broad enforcement powers. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may be subject to enforcement action by the FDA, state or foreign regulatory authorities, which may include any of the following sanctions:

Any of these sanctions could result in higher than anticipated costs or lower than anticipated sales and have a material adverse effect on our reputation, business, results of operations and financial condition.

We also cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative or executive action, either in the U.S. or abroad.  For example, political policies and agendas change with changes in political power, and such changes may impact our business and industry.  

If we choose to acquire new and complementary businesses, products or technologies, we may be unable to complete these acquisitions or successfully integrate them in a cost-effective and non-disruptive manner.

Our success depends in part on our ability to continually enhance and broaden our product offering in response to changing customer demands, competitive pressures and technologies and our ability to increase our market share. Accordingly, we have pursued and intend to pursue the acquisition of complementary businesses, products or technologies instead of developing them ourselves. We do not know if we will be able to successfully complete any acquisitions, or whether we will be able to successfully integrate any acquired business, product or technology into our business or retain any key personnel, suppliers or distributors. Our ability to successfully grow through acquisitions depends upon our ability to identify, negotiate, complete and integrate suitable acquisitions and to obtain any necessary financing. These efforts could be expensive and time consuming, disrupt our ongoing business and distract management. If we are unable to integrate any future or recently acquired businesses, products or technologies effectively, our business, financial condition and results of operations will be materially adversely affected. For example, an acquisition could materially impair our operating results by causing us to incur debt or requiring us to amortize significant amounts of expenses, including non-cash acquisition costs, and acquired assets.

22

---

We may not be able to timely develop new products or product enhancements that will be accepted by the market.

We sell our products in a market that is characterized by technological change, product innovation, evolving industry standards, competing patent claims, patent litigation and intense competition. Our success will depend in part on our ability to develop and introduce new products and enhancements or modifications to our existing products, which we will need to do before our competitors do so and in a manner that does not infringe issued patents of third parties from which we do not have a license. We cannot assure you that we will be able to successfully develop or market new, improved or modified products, or that any of our future products will be accepted by even the surgeons who use our current products. Our competitors’ product development capabilities could be more effective than our capabilities, and their new products may get to market before our products. In addition, the products of our competitors may be more effective or less expensive than our products. The introduction of new products by our competitors may lead us to have price reductions, reduced margins or loss of market share and may render our products obsolete or noncompetitive. The success of any of our new product offerings or enhancement or modification to our existing products will depend on several factors, including our ability to:

Developing products in a timely manner can be difficult, in particular because product designs change rapidly to adjust to third-party patent constraints and to market preferences. As a result, we may experience delays in our product launches which may significantly impede our ability to enter or compete in a given market and may reduce the sales that we are able to generate from these products. We may experience delays in any phase of a product launch, including during research and development, clinical trials, manufacturing, marketing and the surgeon training process. In addition, our suppliers of products or components can suffer similar delays, which could cause delays in our product introductions. If we do not develop new products or product enhancements in time to meet market demand or if there is insufficient demand for these new products or enhancements, it could have a significant adverse effect on our business financial condition and results of operations.

We are dependent on our senior management team, sales and marketing team, engineering team and key surgeon advisors, and the loss of any of them could harm our business.

Our continued success depends in part upon the continued availability and contributions of our senior management, sales and marketing team and engineering team and the continued participation of our key surgeon advisors. While we have entered into employment agreements with all members of our senior management team, none of these agreements guarantees the services of the individual for a specified period of time. We would be adversely affected if we fail to adequately prepare for future turnover of our senior management team. Our ability to grow or at least maintain our sales levels depends in large part on our ability to attract and retain sales and marketing personnel and for these sales people to maintain their relationships with surgeons directly and through our distributors. We rely on our engineering team to research, design and develop potential products for our product pipeline. We also rely on our surgeon advisors to advise us on our products, our product pipeline, long-term scientific planning, research and development and industry trends. We compete for personnel and advisors with other companies and other organizations, many of which are larger and have greater name recognition and financial and other resources than we do. Over the past 3 years, we have implemented numerous changes in our management team, including in the roles of Chief Executive Officer, Chief Financial Officer, Executive Vice President, People & Culture, and General Counsel, which could have an adverse effect on our retention of our employees, advisors and distributors.  Changes to our senior management team, sales and marketing team, engineering team and key surgeon advisors, or our inability to attract or retain other qualified personnel or advisors, could have a significant adverse effect on our business, financial conditions and results of operations.

Compliance with laws and regulations and standards for accounting, corporate governance and public disclosure is time consuming and results in significant expenses.

Changing laws, regulations and standards relating to corporate governance and public disclosure, including the Sarbanes-Oxley Act of 2002, the Dodd-Frank Wall Street Reform and Consumer Protection Act, other SEC regulations, NASDAQ Stock Market listing rules, and new accounting pronouncements create uncertainty and additional complexities for companies such as ours.  Our management and other personnel need to devote a substantial amount of time to these compliance initiatives.  Moreover, these rules and regulations increase our legal and financial compliance costs and make some activities more time consuming and costly.  

23

---

As of June 30, 2018, September 30, 2018 and December 31, 2018, we identified a material weakness in internal control over financial reporting. This material weakness was remediated during the first quarter of 2019 prior to filing this Form 10-K; however, if we fail to maintain an effective system of internal controls, we may not be able to accurately report our financial results. As a result, investors may be misled and lose confidence in our financial reporting and disclosures, and the price of our common stock may be negatively affected.

The Sarbanes-Oxley Act of 2002 requires that we report annually on the effectiveness of our internal control over financial reporting. A “significant deficiency” means a deficiency, or a combination of deficiencies, in internal control over financial reporting that is less severe than a material weakness yet important enough to merit attention by those responsible for oversight of the Company’s financial reporting. A “material weakness” is a deficiency, or a combination of deficiencies in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the annual or interim financial statements will not be prevented or detected on a timely basis.

 

In connection with the assessment of our internal control over financial reporting for the Annual Report on Form 10-K, as further described in Item 9A, we determined that as of June 30, 2018, September 30, 2018 and December 31, 2018 our internal controls over financial reporting were ineffective due to a material weakness related to our review and accounting associated with complex equity transactions. We remediated this material weakness during the first quarter of 2019, prior to filing this Form 10-K.

If we fail to maintain effective internal controls and procedures for financial reporting, we could be unable to provide timely and accurate financial information and therefore be subject to delisting from The NASDAQ Global Select Market, an investigation by the SEC, and civil or criminal sanctions. Additionally, ineffective internal control over financial reporting would place us at increased risk of fraud or misuse of corporate assets and could cause our stockholders, lenders, suppliers and others to lose confidence in the accuracy or completeness of our financial reports.  This, in turn could adversely affect our ability to access the capital markets. We cannot assure you that material weaknesses or significant deficiencies will not occur in the future and that we will be able to remediate such weaknesses or deficiencies in a timely manner, which could impair our ability to accurately and timely report our financial position, results of operations or cash flows.

Security breaches, loss of data and other disruptions could compromise sensitive information related to our business, prevent us from accessing critical information or expose us to liability, which could adversely affect our business and our reputation.

In the ordinary course of our business, we collect and store sensitive data, including legally protected patient health information, credit card information, personally identifiable information about our employees, intellectual property, and proprietary business information. We manage and maintain our applications and data utilizing on-site systems. These applications and data encompass a wide variety of business critical information including research and development information, commercial information and business and financial information.

The secure processing, storage, maintenance and transmission of this critical information is vital to our operations and business strategy, and we devote significant resources to protecting such information. Although we take measures to protect sensitive information from unauthorized access or disclosure, our information technology and infrastructure may be vulnerable to attacks by hackers, viruses, breaches or interruptions due to employee error or malfeasance, terrorist attacks, earthquakes, fire, flood, other natural disasters, power loss, computer systems failure, data network failure, Internet failure, or lapses in compliance with privacy and security mandates. Any such attack, virus, breach or interruption could compromise our networks and the information stored there could be accessed by unauthorized parties, publicly disclosed, lost or stolen. We have measures in place that are designed to detect and respond to such security incidents and breaches of privacy and security mandates. Any such access, disclosure or other loss of information could result in legal claims or proceedings, liability under laws that protect the privacy of personal information, such as HIPAA, government enforcement actions and regulatory penalties. Unauthorized access, loss or dissemination could also interrupt our operations, including our ability to bill our customers, provide customer support services, conduct research and development activities, process and prepare company financial information, manage various general and administrative aspects of our business and damage our reputation, any of which could adversely affect our business.

24

---

Nearly all of our operations are currently conducted in locations that may be at risk of damage from fire, earthquakes or other natural disasters.

We currently conduct nearly all of our development and management activities in Carlsbad, California near known wildfire areas and earthquake fault zones. We have taken precautions to safeguard our facilities, including obtaining property and casualty insurance, and implementing health and safety protocols. We have developed an information technology disaster recovery plan. However, any future natural disaster, such as a fire or an earthquake, could cause substantial delays in our operations, damage or destroy our equipment or inventory and cause us to incur additional expenses. A disaster could seriously harm our business, financial condition and results of operations. Our facilities would be difficult to replace and would require substantial lead time to repair or replace. The insurance we maintain against earthquakes, fires, and other natural disasters would not be adequate to cover a total loss of our facilities, may not be adequate to cover our losses in any particular case and may not continue to be available to us on acceptable terms, or at all.

Alphatec Holdings is a holding company with no operations, and unless it receives dividends or other payments from its subsidiaries, it will be unable to fulfill its cash obligations.

As a holding company with no business operations, Alphatec Holdings’ material assets consist only of the common stock of its subsidiaries, dividends and other payments received from time to time from its subsidiaries, and the proceeds raised from the sale of debt and equity securities. Alphatec Holdings’ subsidiaries are legally distinct from Alphatec Holdings and have no obligation, contingent or otherwise, to make funds available to Alphatec Holdings. Alphatec Holdings will have to rely upon dividends and other payments from its subsidiaries to generate the funds necessary to fulfill its cash obligations. Alphatec Holdings may not be able to access cash generated by its subsidiaries in order to fulfill cash commitments. The ability of Alphatec Spine or SafeOp Surgical to make dividend and other payments to Alphatec Holdings is subject to the availability of funds after taking into account its subsidiaries’ funding requirements, the terms of its subsidiaries’ indebtedness and applicable state laws.

If we fail to properly manage our anticipated growth, our business could suffer.

We will continue to pursue growth in the number of surgeons using our products, the types of products we offer and the geographic regions where our products are sold. Such anticipated growth has placed and will continue to place significant demands on our managerial, operational and financial resources and systems. Future growth would impose significant added responsibilities on members of management, including the need to identify, recruit, maintain, motivate and integrate additional personnel. Also, our management may need to divert a disproportionate amount of its attention away from our day-to-day activities and devote a substantial amount of time to managing these anticipated growth activities. We are currently focused on increasing the size and effectiveness of our sales force and distribution network, marketing activities, research and development efforts, inventory management systems, management team and corporate infrastructure. If we do not manage our anticipated growth effectively, the quality of our products, our relationships with physicians, distributors and hospitals, and our reputation could suffer, which would have a significant adverse effect on our business, financial condition and results of operations. We must attract and retain qualified personnel and third-party distributors and manage and train them effectively. Personnel qualified in the design, development, production and marketing of our products are difficult to find and hire, and enhancements of information technology systems to support our growth are difficult to implement. We will also need to carefully monitor and manage our surgeon services, our third-party manufacturing resources, quality assurance and efficiency, and the quality assurance and efficiency of our suppliers and distributors. This managing, training and monitoring will require allocation of valuable management resources and significant expense. If our management is unable to effectively manage our expected growth, our expenses may increase more than expected, our ability to generate and/or grow revenues could be reduced and we may not be able to implement our business strategy.

Risks Related to Our Financial Results, Credit and Certain Financial Obligations and Need for Financing

We may need to raise additional funds in the future and such funds may not be available on acceptable terms, if at all.

At December 31, 2018, our principal sources of liquidity consisted of cash of $29.1 million, accounts receivable, net of $15.1 million and available borrowings under our revolving credit facility.  We believe that our current sources of liquidity will be sufficient to fund our planned expenditures and meet our obligations for at least 12 months.

We will seek additional funds from public and private equity or debt financings, borrowings under new debt facilities or other sources to fund our projected operating requirements. Our capital requirements will depend on many factors, including:

25

---

As a result of these factors, we may need to raise additional funds and such funds may not be available on favorable terms, if at all. Under the securities purchase agreement we entered into in connection with our March 2018 private placement, we are required to issue additional shares of our common stock to purchasers under such agreement if we issue or enter into an agreement to issue any shares of our common stock or securities exercisable or convertible into shares of our common stock, subject to certain permitted exceptions, prior to May 11, 2019 at prices below $3.15.  In addition, rules and regulations of the SEC may restrict our ability to conduct certain types of financing activities, or may affect the timing of and the amounts we can raise by undertaking such activities. For example, under current SEC regulations, at any time during which the aggregate market value of our common stock held by non-affiliates, or our public float, is less than $75 million, the amount that we can raise through primary public offerings of securities in any twelve-month period using one or more registration statements on Form S-3 will be limited to an aggregate of one-third of our public float. As of March 25, 2019, our public float was $81.7 million.  

Furthermore, if we issue additional equity or debt securities to raise additional funds, our existing stockholders may experience dilution and the new equity or debt securities may have rights, preferences and privileges senior to those of our existing stockholders. In addition, if we raise additional funds through collaboration, licensing or other similar arrangements, it may be necessary to relinquish valuable rights to our potential products or proprietary technologies, or to grant licenses on terms that are not favorable to us. If we cannot raise funds on acceptable terms, we may not be able to repay debt or other liabilities, develop or enhance our products, execute our business plan, take advantage of future opportunities, or respond to competitive pressures or unanticipated customer requirements. Any of these events could adversely affect our ability to achieve our development and commercialization goals and have a significant adverse effect on our business, financial condition and results of operations.

If we default on our obligations to make settlement payments to Orthotec LLC, the amounts due under the settlement agreements accelerate and become due and payable.

Any default of our payment obligation under the settlement agreements we entered into with Orthotec LLC, or Orthotec, would give Orthotec the right to declare all of the future payments to be immediately payable. As of December 31, 2018, the outstanding amount to be paid to Orthotec through January 2024 including future interest was $21.6 million. If acceleration of payments occurs, our business, financial condition and results of operations could be materially and adversely affected.

 

 

We have a history of net losses, we expect to continue to incur net losses in the near future, and we may not achieve or maintain profitability.

 

We have typically incurred net losses from our continuing operations since our inception. As of December 31, 2018, we had an accumulated deficit of $501.9 million. We have incurred significant net losses since inception and have relied on our ability to fund our operations through revenues from the sale of our products, equity financings and debt financings. As we have incurred losses, successful transition to profitability is dependent upon achieving a level of revenues adequate to support our cost structure. This may not occur and, unless and until it does, we will continue to need to raise additional capital.  We may seek additional funds from public and private equity or debt financings, borrowings under new debt facilities or other sources to fund our projected operating requirements.  However, there is no guarantee that we will be able to obtain further financing, or do so on reasonable terms. If we are unable to raise additional funds on a timely basis, or at all, we would be materially adversely affected.

 

26

---

We may be unable to comply with the covenants of our credit facilities.

We must comply with certain affirmative and negative covenants, including financial covenants and affirmative and negative covenants under the Term Loan with Squadron and our Amended Credit Facility with MidCap Funding IV, LLC (“MidCap”). There can be no assurance that at all times in the future we will satisfy all such financial or other covenants of the Term Loan or the Amended Credit Facility, or obtain any required waiver or amendment, in which event of default the lender could refuse to make further extensions of credit to us and Squadron/MidCap could require all amounts borrowed under the Term Loan and/or the Amended Credit Facility together with accrued interest and other fees, to be immediately due and payable. In addition to allowing the lender to accelerate the loan, several events of default under the Term Loan and the Amended Credit Facility, such as our failure to make required payments of principal and interest and the occurrence of certain bankruptcy or insolvency events, could require us to pay interest at a rate which is up to five percentage points higher than the interest rate effective immediately before the event of default.

An event of default under the Term Loan or the Amended Credit Facility could have a material adverse effect on us. Upon an event of default, if the lender under the Term Loan or the Amended Credit Facility accelerate the repayment of all amounts borrowed, together with accrued interest and other fees, or if the lender select to charge us additional interest, we cannot assure you that we will have sufficient cash available to repay the amounts due, and we may be forced to seek to amend the terms of the Term Loan or the Amended Credit Facility or obtain alternative financing, which may not be available to us on acceptable terms, if at all.

In addition, if we fail to pay amounts when due under the Term Loan or the Amended Credit Facility or upon the occurrence of another event of default, the lender under the Term Loan or the Amended Credit Facility could proceed against the collateral granted to it pursuant to the agreements governing the Term Loan or the Amended Credit Facility. We have granted to the lender under the Term Loan a first priority security interest in substantially all of our assets, other than all accounts receivable, and all securities evidencing our interests in our subsidiaries, as collateral under the agreement governing the Term Loan. We have granted to the lender under the Amended Credit Facility a first priority security interest in our accounts receivable and a second priority lien on substantially all of our other assets, as collateral under the agreement governing Amended Credit Facility. If either lender proceeds against the collateral, such assets would no longer be available for use in our business, which would have a significant adverse effect our business, financial condition and results of operations.

Our quarterly financial results could fluctuate significantly.

Our quarterly financial results are difficult to predict and may fluctuate significantly from period to period, particularly because our sales prospects are uncertain. The level of our revenues and results of operations at any given time will be based primarily on the following factors:

In addition, until we have a larger base of surgeons using our products, occasional fluctuations in the use of our products by individual surgeons or small groups of surgeons will have a proportionately larger impact on our revenues than for companies with a larger customer base.

Many of the products we may seek to develop and introduce in the future will require FDA approval or clearance. We cannot begin to commercialize any such products in the U.S. without FDA approval or clearance. As a result, it will be difficult for us to forecast demand for these products with any degree of certainty. We cannot assure you that our revenue will increase or be sustained in future periods or that we will be profitable in any future period. Any shortfalls in revenue or earnings from levels expected by our stockholders or by securities or industry analysts could have an immediate and significant adverse effect on the trading price of our common stock in any given period.

27

---

Risks Related to Our Intellectual Property; Regulatory Penalties and Litigation

If our patents and other intellectual property rights do not adequately protect our products, we may lose market share to our competitors and be unable to operate our business profitably.

Our success depends significantly on our ability to protect our proprietary rights of the technologies used in our products. We rely on patent protection, as well as a combination of copyright, trade secret and trademark laws, and nondisclosure, confidentiality and other contractual restrictions to protect our proprietary technology. However, these legal means afford only limited protection and may not adequately protect our rights or permit us to gain or keep any competitive advantage. For example, we cannot assure you that any of our pending patent applications will result in the issuance of patents to us. The U.S. Patent and Trademark Office, or PTO, may deny or require significant narrowing of claims in our pending patent applications, and patents issued as a result of the pending patent applications, if any, may not provide us with significant commercial protection or be issued in a form that is advantageous to us. We could also incur substantial costs in proceedings before the PTO. These proceedings could result in adverse decisions as to the priority of our inventions and the narrowing or invalidation of claims in issued patents. Our issued patents and those that may be issued in the future could subsequently be successfully challenged by others and invalidated or rendered unenforceable, which could limit our ability to stop competitors from marketing and selling related products. In addition, our pending patent applications include claims to aspects of our products and procedures that are not currently protected by issued patents.

Both the patent application process and the process of managing patent disputes can be time consuming and expensive. Competitors may be able to design around our patents or develop products that provide outcomes that are comparable to our products but fall outside of the scope of our patent protection. Although we have entered into confidentiality agreements and intellectual property assignment agreements with certain of our employees, consultants and advisors as one of the ways we seek to protect our intellectual property and other proprietary technology, such agreements may not be enforceable or may not provide meaningful protection for our trade secrets or other proprietary information in the event of unauthorized use or disclosure or other breaches of the agreements. In the event a competitor infringes upon one of our patents or other intellectual property rights, enforcing those patents and rights may be difficult and time consuming. Even if successful, litigation to defend our patents against challenges or to enforce our intellectual property rights could be expensive and time consuming and could divert management’s attention from managing our business. Moreover, we may not have sufficient resources to defend our patents against challenges or to enforce our intellectual property rights.

The medical device industry is characterized by patent and other intellectual property litigation and we could become subject to litigation that could be costly, result in the diversion of management’s time and efforts, require us to pay damages, and/or prevent us from marketing our existing or future products.

The medical device industry is characterized by extensive litigation and administrative proceedings over patent and other intellectual property rights. Determining whether a product infringes a patent involves complex legal and factual issues, the determination of which is often uncertain. Our competitors may assert that our products, the components of those products, the methods of using those products, or the methods we employ in manufacturing or processing those products are covered by patents held by them. In addition, they may claim that their patents have priority over ours because their patents were filed first. Because patent applications can take many years to issue, there may be applications now pending of which we are unaware, which may later result in issued patents that our products may infringe. There could also be existing patents that one or more components of our products may be inadvertently infringing, of which we are unaware. As the number of participants in the market for spine disorder devices and treatments increases, the possibility of patent infringement claims against us also increases.

Any such claim against us, even those without merit, may cause us to incur substantial costs, and could place a significant strain on our financial resources, divert the attention of management from our core business and harm our reputation. If the relevant patents are upheld as valid and enforceable and we are found to infringe, we could be required to pay substantial damages, including treble, or triple, damages if an infringement is found to be willful, and/or royalties and we could be prevented from selling our products unless we could obtain a license or were able to redesign our products to avoid infringement. Any such license may not be available on reasonable terms, if at all, and there can be no assurance that we would be able to redesign our products in a way that would not infringe those patents, and any such redesign, if possible, may be costly. If we fail to obtain any required licenses or make any necessary changes to our products or technologies, we may have to withdraw existing products from the market or may be unable to commercialize one or more of our products, either of which could have a significant adverse effect on our business, financial condition and results of operations. We may lose market share to our competitors if we fail to protect our intellectual property rights.

In addition, in order to further our product development efforts, from time to time we enter into agreements with surgeons to develop new products. As consideration for product development activities rendered pursuant to these agreements, in certain instances we have agreed to pay such surgeons royalties on products developed by cooperative involvement between us and such surgeons. There can be no assurance that surgeons with whom we have entered into such an arrangement will not claim to be entitled to a royalty even if we do not believe that such products were developed by cooperative involvement between us and such surgeons. Any such claim against us, even those without merit, may cause us to incur substantial costs, and could place a significant strain on our financial resources, divert the attention of management from our core business and harm our reputation.

 

28

---

We are currently involved in a patent litigation action involving NuVasive, Inc. and, if we do not prevail in this action, we could be liable for past damages and might be prevented from making, using, selling, offering to sell, importing or exporting certain of our products.

 

 

On February 15, 2018, NuVasive, Inc. (“NuVasive”) filed suit against us in the U.S. District Court for the Southern District of California, alleging that certain of our products infringe, or contribute to the infringement of, U.S. patents owned by NuVasive. NuVasive is a large, publicly-traded corporation with significantly greater financial resources than us.

 

Intellectual property litigation is expensive, complex and lengthy and its outcome is difficult to predict. We may also be subject to negative publicity due to the litigation. Pending or future patent litigation against us or any strategic partners or licensees may force us or any strategic partners or licensees to stop or delay developing, manufacturing or selling potential products that are claimed to infringe a third party’s intellectual property, unless that party grants us or any strategic partners or licensees rights to use its intellectual property, and may significantly divert the attention of our technical and management personnel. In the event that our right to market any of our products is successfully challenged, and if we fail to obtain a required license or are unable to design around a patent, our business, financial condition or results of operations could be materially adversely affected. In such cases, we may be required to obtain licenses to patents or proprietary rights of others in order to continue to commercialize our products. However, we may not be able to obtain any licenses required under any patents or proprietary rights of third parties on acceptable terms, or at all and any licenses may require substantial royalties or other payments by us. Even if any strategic partners, licensees or we were able to obtain rights to the third party’s intellectual property, these rights may be non-exclusive, thereby giving our competitors access to the same intellectual property. Furthermore, if we are found to infringe patent claims of a third party, we may, among other things, be required to pay damages, including up to treble damages and attorney’s fees and costs, which may be substantial.

 

An unfavorable outcome for us in this patent litigation could significantly harm our business if such outcome makes us unable to commercialize some of our current or potential products or cease some of our business operations. In addition, costs of defense and any damages resulting from the litigation may materially adversely affect our business and financial results. The litigation may also harm our relationships with existing customers and subject us to negative publicity, each of which could harm our business and financial results.

If we become subject to product liability claims, we may be required to pay damages that exceed our insurance coverage.

Our business exposes us to potential product liability claims that are inherent in the testing, design, manufacture and sale of medical devices for spine surgery procedures. Spine surgery involves significant risk of serious complications, including bleeding, nerve injury, paralysis and even death. To date, our products have not been the subject of any material product liability claims. We carry product liability insurance. However, our existing product liability insurance coverage may be inadequate to satisfy liabilities we might incur. Any product liability claim brought against us, with or without merit, could result in the increase of our product liability insurance rates or our inability to secure coverage in the future on commercially reasonable terms, if at all. In addition, if our product liability insurance proves to be inadequate to pay a damage award, we may have to pay the excess out of our cash reserves, which could harm our financial condition. If longer-term patient results and experience indicate that our products or any component of our products cause tissue damage, motor impairment or other adverse effects, we could be subject to significant liability. Even a meritless or unsuccessful product liability claim could harm our reputation in the industry, lead to significant legal fees and result in the diversion of management’s attention from managing our business. If a product liability claim or series of claims is brought against us in excess of our insurance coverage limits, our business could suffer and our financial condition, results of operations and cash flow could be materially adversely impacted.

Because biologics products entail a potential risk of communicable disease to human recipients, we may be the subject of product liability claims regarding our biologics products.

Our biologics products may expose us to additional potential product liability claims. The development of biologics products entails a risk of additional product liability claims because of the risk of transmitting disease to human recipients, and substantial product liability claims may be asserted against us. In addition, successful product liability claims made against one of our competitors could cause claims to be made against us or expose us to a perception that we are vulnerable to similar claims. Even a meritless or unsuccessful product liability claim could harm our reputation in the industry, lead to significant legal fees and result in the diversion of management’s attention from managing our business.

29

---

Any claims relating to our improper handling, storage or disposal of biological, hazardous and radioactive materials could be time consuming and costly.

The manufacture of certain of our products, including our biologics products, involves the controlled use of biological, hazardous and/or radioactive materials and waste. Our business and facilities and those of our suppliers are subject to foreign, federal, state and local laws and regulations governing the use, manufacture, storage, handling and disposal of these hazardous materials and waste products. Although we believe that our safety procedures for handling and disposing of these materials comply with legally prescribed standards, we cannot completely eliminate the risk of accidental contamination or injury from these materials. In the event of an accident, we could be held liable for damages or penalized with fines. This liability could exceed our resources and any applicable insurance. In addition, under some environmental laws and regulations, we could also be held responsible for all of the costs relating to any contamination at our past or present facilities and at third-party waste disposal sites, even if such contamination was not caused by us. We may incur significant expenses in the future relating to any failure to comply with environmental laws. Any such future expenses or liability could have a significant negative impact on our business, financial condition and results of operations.

We may be subject to damages resulting from claims that we, our employees or our independent distributors have wrongfully used or disclosed alleged trade secrets of our competitors or are in breach of non-competition or non-solicitation agreements with our competitors.

Many of our employees were previously employed at other medical device companies, including our competitors or potential competitors. Many of our independent distributors sell, or in the past have sold, products of our competitors. We may be subject to claims that we, our employees or our independent distributors have inadvertently or otherwise used or disclosed the trade secrets or other proprietary information of our competitors. In addition, we have been and may in the future be subject to claims that we caused an employee or independent distributor to break the terms of his or her non-competition agreement or non-solicitation agreement. Litigation may be necessary to defend against such claims. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management. If we fail in defending such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights and/or personnel. A loss of key personnel and/or their work product could hamper or prevent our ability to commercialize products, which could have an adverse effect on our business, financial condition and results of operations.

Risks Related to Our Common Stock

If we fail to continue to meet all applicable NASDAQ Global Select Market requirements and our common stock is delisted, the delisting could adversely affect the market liquidity of our common stock, impair the value of your investment and harm our business.

Our common stock is currently listed on the NASDAQ Global Select Market. In order to maintain that listing, we must satisfy minimum financial and other requirements.  Although we are currently in compliance with applicable NASDAQ Global Select Market requirements,  if we fail to continue to meet all such requirements in the future and NASDAQ determines to delist our common stock, the delisting could substantially decrease trading in our common stock and adversely affect the market liquidity of our common stock; adversely affect our ability to obtain financing on acceptable terms, if at all, to continue our operations; and may result in the potential loss of confidence by investors, suppliers, customers and employees and fewer business development opportunities. Additionally, the market price of our common stock may decline further and stockholders may lose some or all of their investment.

We expect that the price of our common stock will fluctuate substantially and the market price of our common stock may decline in value in the future.

The market price of our common stock is likely to be highly volatile and may fluctuate substantially due to many factors, including those described elsewhere in this “Risk Factors” section and the following:

30

---

We may become involved in securities class action litigation that could divert management’s attention and harm our business.

The stock market in general, The NASDAQ Global Select Market and the market for medical device companies in particular, has experienced price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of those companies. Further, the market prices of securities of medical device companies have been particularly volatile. In the past, following periods of volatility in the market price of a particular company’s securities, securities class action litigation has often been brought against that company. We may become involved in this type of litigation in the future. Litigation is often expensive and diverts management’s attention and resources, which could materially harm our financial condition, results of operations and business.

Securities analysts may not provide coverage of our common stock or may issue negative reports, which may have a negative impact on the market price of our common stock.

Securities analysts may not provide research coverage of our common stock. If securities analysts do not cover our common stock, the lack of research coverage may cause the market price of our common stock to decline. The trading market for our common stock may be affected in part by the research and reports that industry or financial analysts publish about our business. If one or more of the analysts who elects to cover us downgrades our stock, our stock price would likely decline rapidly. If one or more of these analysts ceases coverage of us, we could lose visibility in the market, which in turn could cause our stock price to decline. In addition, it may be difficult for companies such as ours, with smaller market capitalizations, to attract independent financial analysts that will cover our common stock. This could have a negative effect on the market price of our stock.

Because of their significant stock ownership, our executive officers, directors and principal stockholders will be able to exert control over us and our significant corporate decisions.

Based on shares outstanding at March 25, 2019, our executive officers, directors and stockholders holding more than 5% of our outstanding common stock and their affiliates, in the aggregate, beneficially own approximately 34.7% of our outstanding common stock. As a result, these persons will have the ability to impact significantly the outcome of all matters requiring stockholder approval, including the election and removal of directors and any merger, consolidation, or sale of all or substantially all of our assets.

This concentration of ownership may harm the market price of our common stock by, among other things:

31

---

Anti-takeover provisions in our organizational documents and change of control provisions in some of our employment agreements and agreements with distributors, and in some of our outstanding debt agreements, as well as the terms of our redeemable preferred stock, may discourage or prevent a change of control, even if an acquisition would be beneficial to our stockholders, which could affect our stock price adversely.

Certain provisions of our amended and restated certificate of incorporation and restated by-laws could discourage, delay or prevent a merger, acquisition or other change in control that stockholders may consider favorable, including transactions in which our stockholders might otherwise receive a premium for their shares. These provisions also could limit the price that investors might be willing to pay in the future for shares of our common stock, thereby depressing the market price of our common stock. Stockholders who wish to participate in these transactions may not have the opportunity to do so. Furthermore, these provisions could prevent or frustrate attempts by our stockholders to replace or remove our management. These provisions:

Some of our employment agreements and all of our restricted stock agreements, incentive stock option agreements, performance-based stock units and restricted common stock provide for accelerated vesting of benefits, including full vesting of restricted stock and options, upon a change of control. A limited number of our agreements with our distributors include a provision that extends the term of the distribution agreement upon a change in control and makes it more difficult for us or our successor to terminate the agreement. These provisions may discourage or prevent a change of control.

In addition, in the event of a change of control, we would be required to redeem all outstanding shares of our redeemable preferred stock for an aggregate of $29.9 million, at the price of $9.00 per share. Further, our amended and restated certificate of incorporation permits us to issue additional shares of preferred stock. The terms of our redeemable preferred stock or any new preferred stock we may issue could have the effect of delaying, deterring or preventing a change in control.

Our ability to use our net operating loss carryforwards and certain other tax attributes may be limited.

Under Sections 382 and 383 of the Internal Revenue Code of 1986, as amended (“Section 382”), if a corporation undergoes an “ownership change,” generally defined as a cumulative change in its equity ownership by “5-percent shareholders” of greater than 50 percentage points (by value) over a three-year period, the corporation’s ability to use its pre-change net operating loss carryforwards, or NOLs, and certain other pre-change tax attributes (such as research tax credits) to offset its post-change taxable income and taxes, as applicable, may be limited. We have completed multiple rounds of financing and entered into transactions which may have resulted in an ownership change or could result in an ownership change in the future. We have not completed an analysis of our equity shifts which occurred during 2018 (and the period prior to the issuance of our 2018 annual report) pursuant to Section 382.  Therefore, it is possible that we have experienced an ownership change pursuant to Section 382. We may also experience ownership changes in the future as a result of subsequent shifts in our stock ownership. As a result, our ability to use our NOLs and research and development credit carryforwards to offset our U.S. federal taxable income and taxes, as applicable, may be subject to limitations, which could potentially result in increased future tax liability to us. In addition, at the state level, similar rules may apply and there may be periods during which the use of NOLs is suspended or otherwise limited, which could accelerate or permanently increase state taxes owed.

 

We could be subject to changes in our tax rates, new tax legislation or additional tax liabilities.

 

The U.S. government has recently enacted comprehensive tax legislation that includes significant changes to the taxation of business entities. These changes include, among others, (i) a permanent reduction to the corporate income tax rate, (ii) a partial limitation on the deductibility of business interest expense, (iii) a shift of the U.S. taxation of multinational corporations from a tax on worldwide income to a territorial system (along with certain rules designed to prevent erosion of the U.S. income tax base) and (iv) a one-time tax on accumulated offshore earnings held in cash and illiquid assets, with the latter taxed at a lower rate. The overall impact of this tax reform is uncertain, and our business and financial condition could be adversely affected. In addition, it is uncertain if and to what extent various states will conform to the newly enacted federal tax law.

32

---

Our tax returns and other tax matters also are subject to examination by the U.S. Internal Revenue Service and other tax authorities and governmental bodies. We regularly assess the likelihood of an adverse outcome resulting from these examinations to determine the adequacy of our provision for taxes. We cannot guarantee the outcome of these examinations. If our effective tax rates were to increase, particularly in the U.S., or if the ultimate determination of our taxes owed is for an amount in excess of amounts previously accrued, our financial condition, operating results and cash flows could be adversely affected.

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K and, in particular, the description of our "Business" set forth in Item 1, the "Risk Factors" set forth in this Item 1A and our "Management’s Discussion and Analysis of Financial Condition and Results of Operations" set forth in Item 7 contain or incorporate a number of forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, or the Securities Act, and Section 21E of the Securities Exchange Act of 1934, as amended, or the Exchange Act, including statements regarding:

33

---

Any or all of our forward-looking statements in this Annual Report may turn out to be wrong. They can be affected by inaccurate assumptions by known or unknown risks and uncertainties. Many factors mentioned in our discussion in this Annual Report on Form 10-K will be important in determining future results. Consequently, no forward-looking statement can be guaranteed. Actual future results may vary materially from expected results.

We also provide a cautionary discussion of risks and uncertainties under “Risk Factors” in Item 1A of this Annual Report. These are factors that we think could cause our actual results to differ materially from expected results. Other factors besides those listed there could also adversely affect us.

Without limiting the foregoing, the words “believe,” “anticipate,” “plan,” “expect,” “may,” “could,” “would,” “seek,”  “intend,” and similar expressions are intended to identify forward-looking statements. There are a number of factors and uncertainties that could cause actual events or results to differ materially from those indicated by such forward-looking statements, many of which are beyond our control, including the factors set forth under “Item 1A Risk Factors.” In addition, the forward-looking statements contained herein represent our estimate only as of the date of this filing and should not be relied upon as representing our estimate as of any subsequent date. While we may elect to update these forward-looking statements at some point in the future, we specifically disclaim any obligation to do so to reflect actual results, changes in assumptions or changes in other factors affecting such forward-looking statements, except as required by applicable law.

None.

Our corporate office is located in Carlsbad, California. The table below provides selected information regarding our current material operating location.

 

 

We are and may become involved in various legal proceedings arising from our business activities. While the Company has no material accruals for pending litigation or claims for which accrual amounts are not disclosed in the Company’s consolidated financial statements, litigation is inherently unpredictable, and depending on the nature and timing of a proceeding, an unfavorable resolution could materially affect our future consolidated results of operations, cash flows or financial position in a particular period.  We assess contingencies to determine the degree of probability and range of possible loss for potential accrual or disclosure in our consolidated financial statements. An estimated loss contingency is accrued in our consolidated financial statements if it is probable that a liability has been incurred and the amount of the loss can be reasonably estimated. Because litigation is inherently unpredictable and unfavorable resolutions could occur, assessing contingencies is highly subjective and requires judgments about future events. When

34

---

evaluating contingencies, we may be unable to provide a meaningful estimate due to a number of factors, including the procedural status of the matter in question, the presence of complex or novel legal theories, and/or the ongoing discovery and development of information important to the matters. In addition, damage amounts claimed in litigation against us may be unsupported, exaggerated or unrelated to reasonably possible outcomes, and as such are not meaningful indicators of our potential liability.

Refer to Note 6 of our Notes to Consolidated Financial Statements included elsewhere in this Annual Report on Form 10-K for further information regarding the NuVasive, Inc. litigation.

 

Not applicable.

35

---

PART II

Market Information

Our common stock is traded on The NASDAQ Global Select Market under the symbol “ATEC.”

Stockholders

As of March 25, 2019, there were approximately 337 holders of record of an aggregate 46,847,652 outstanding shares of our common stock.

Dividend Policy

We have never declared or paid cash dividends on our capital stock. We currently intend to retain all available funds and any future earnings for use in the operation and expansion of our business and do not anticipate paying any cash dividends in the foreseeable future.  In addition, our ability to pay dividends is currently restricted by the terms of the Amended Credit Facility with MidCap and the Term Loan with Squadron.

Issuer Purchases of Equity Securities

Under the terms of our 2016 Equity Incentive Plan and our Amended and Restated 2005 Employee, Director and Consultant Stock Plan, as amended, which we refer to collectively as the Stock Plans, and prior to the expiration of the Stock Plans in May 2026, we are permitted to award shares of restricted stock to our employees, directors and consultants. These shares of restricted stock are subject to a lapsing right of repurchase by us. We may exercise this right of repurchase in the event that a restricted stock recipient’s employment, directorship or consulting relationship with us terminates prior to the end of the vesting period. If we exercise this right, we are required to repay the purchase price paid by or on behalf of the recipient for the repurchased restricted shares. Repurchased shares are returned to the Stock Plans and are available for future awards under the terms of the Stock Plans. There were no shares of common stock repurchased during the years ended December 31, 2018 or 2017.

We are a smaller reporting company as defined by Rule 12b-2 of the Exchange Act and are not required to provide the information required under this item.

 

36

---

The following discussion of our financial condition and results of operations should be read in conjunction with the financial statements and the notes to those statements appearing elsewhere in this Annual Report on Form 10-K. Some of the information contained in this discussion and analysis or set forth elsewhere in this report include the identification of certain trends and other statements that may predict or anticipate future business or financial results that are subject to important factors that could cause our actual results to differ materially from those indicated. See “Item 1A Risk Factors” included elsewhere in this Annual Report on Form 10-K.

Overview

We are a medical technology company focused on the design, development, and advancement of technology for better surgical treatment of spinal disorders. We are dedicated to revolutionizing the approach to spine surgery. We have a broad product portfolio designed to address the majority of U.S. market for fusion-based spinal disorder solutions. We intend to drive growth by exploiting our collective spine experience and investing in the research and development to continually differentiate our solutions and improve spine surgery. We believe our future success will be fueled by introducing market-shifting innovation to the spine market, and we believe that we are well-positioned to capitalize on current spine market dynamics.

We market and sell our products in the U.S. through a network of independent distributors and direct sales representatives. An objective of our leadership team is to deliver increasingly consistent, predictable growth. To accomplish this, we have partnered more closely with new and existing distributors to create a more dedicated and loyal sales channel for the future. We have added, and intend to continue to add, new high-quality dedicated distributors to expand future growth. We believe this will allow us to reach an untapped market of surgeons, hospitals, and national accounts across the U.S., as well as better penetrate existing accounts and territories.

We have made significant progress in the transition of our sales channel since early 2017, driving the percent of sales contributed by our strategic distribution channel from approximately 59% for the year ended December 31, 2017 to 80% for the year ended December 31, 2018.  Going forward, we intend to continue to relentlessly drive toward a fully exclusive network of independent and direct sales agents.  Recent consolidation in the industry is facilitating the process, as large, seasoned agents are seeking opportunities to re-enter the spine market by partnering with spine-focused companies that have broad, growing product portfolios.  

Sale of International Business

On September 1, 2016, we completed the sale of our international distribution operations and agreements, including our wholly-owned subsidiaries in Japan, Brazil, Australia, China and Singapore and substantially all of the assets of our other sales operations in the United Kingdom and Italy (“International Business”), to an affiliate of Globus (“Globus Transaction”). Following the closing of the Globus Transaction, we now operate in the U.S. market only and are restricted from marketing and selling our products in foreign markets pursuant to the terms and conditions, and for the time periods, set forth in the definitive documents related to the Globus Transaction.

Revenue and Expense Components

The following is a description of the primary components of our revenues and expenses:

Revenues. We derive our revenues primarily from the sale of spinal surgery implants used in the treatment of spine disorders. Spinal implant products include pedicle screws and complementary implants, interbody devices, plates, and tissue-based materials. Our revenues are generated by our direct sales force and independent distributors. Our products are requested directly by surgeons and shipped and billed to hospitals and surgical centers.  Currently, most of our business is conducted with customers within markets in which we have experience and with payment terms that are customary to our business. We may defer revenues until the time of collection if circumstances related to payment terms, regional market risk or customer history indicate that collectability is not reasonably assured.

Cost of revenues. Cost of revenues consists of direct product costs, royalties, milestones and the amortization of purchased intangibles. Our product costs consist primarily of direct labor, overhead, and raw materials and components. The product costs of certain of our biologics products include the cost of procuring and processing human tissue. We incur royalties related to the technologies that we license from others and the products that are developed in part by surgeons with whom we collaborate in the product development process. Amortization of purchased intangibles consists of amortization of developed product technology.

37

---

Research and development. Research and development expense consists of costs associated with the design, development, testing, and enhancement of our products. Research and development expense also includes salaries and related employee benefits, research-related overhead expenses, fees paid to external service providers in both cash and equity, and costs associated with our Scientific Advisory Board and Executive Surgeon Panels.

Sales, general and administrative. Sales, general and administrative expense consists primarily of salaries and related employee benefits, sales commissions and support costs, depreciation of our surgical instruments, regulatory affairs, quality assurance costs, professional service fees, travel, medical education, trade show and marketing costs, insurance and legal expenses.

Litigation-related expenses. Litigation-related expenses are costs incurred for our ongoing litigation, primarily with NuVasive, Inc.

Transaction related expenses. Reflects the recognition of transaction expense incurred as part of the SafeOp acquisition.

Gain on settlement. Gain on settlement consists of a gain of approximately $6.2 million for the year ended December 31, 2018 as a result of the settlement agreement with Elite Medical Holdings and Pac 3 Surgical, pursuant to which we made a cash payment of $0.4 million as the final and total compensation under the collaboration and related amendment.  The gain reflects the reversal of accrued obligations previously recorded under the collaboration.  

Restructuring expenses. Restructuring expense consists of severance, social plan benefits and related taxes in connection with our ongoing cost rationalization efforts, including the termination of our manufacturing operations in California in 2017.

Loss on debt extinguishment. Loss on debt extinguishment is comprised of all amounts previously recorded as debt issuance costs related to the Globus facility that was repaid in full.

Total other income (expense). Total other income (expense) includes interest income, interest expense, changes in the fair value of the warrant liabilities, gains and losses from foreign currency exchanges and other non-operating gains and losses.

Income tax benefit. Income tax benefit from continuing operations primarily consists of release of the valuation allowance from the SafeOp acquisition, partially offset by state taxes.

38

---

Results of Operations

The first table below sets forth our statements of operations data for the periods presented. Our historical results are not necessarily indicative of the operating results that may be expected in the future. The amounts included for the year ended December 31, 2018 reflects results from our newly acquired subsidiary from the period of March 9, 2018 through December 31, 2018.

 

39

---

 

 

Year Ended December 31, 2018 Compared to the Year Ended December 31, 2017

Revenues. Revenues were $91.7 million for the year ended December 31, 2018 compared to $101.7 million for the year ended December 31, 2017, representing a decrease of $10.0 million, or 9.8%.

Revenue from U.S. products was $83.7 million for the year ended December 31, 2018 compared to $86.9 million for the year ended December 31, 2017, representing a decrease of $3.2 million, or 3.7%. The decrease in revenue for the year ended December 31, 2018 was attributed primarily to our decision to exit the stocking distributor model and terminate distributor relationships that are not representative of our long-term business strategy. While our U.S. product revenue declined for the year ended December 31, 2018 compared to the year ended December 31, 2017, revenues from our strategic distribution channel increased for the year ended December 31, 2018 as detailed below (in thousands):

 

 

Revenue from international supply agreement, which is attributed to sales to Globus under which we supply our products for Globus’ international customers, was $8.0 million for the year ended December 31, 2018 compared to $14.8 million for the year ended December 31, 2017, representing a decrease of $6.8 million.   We expect these revenues to continue to decrease over the next several quarters, as Globus continues to register its own products in international markets.

 

Cost of revenues. Total cost of revenues was $28.5 million for the year ended December 31, 2018 compared to $33.5 million for the year ended December 31, 2017, representing a decrease of $5.0 million, or 14.9%.

Cost of revenue from U.S. products for the year ended December 31, 2018 increased to $20.9 million compared to $20.3 million for the year ended December 31, 2017. The increase is primarily due to an increase in excess and obsolescence expense as we are launching newly developed products and phasing out older, legacy products.

40

---

Cost of revenues from international supply agreement were $7.5 million for the year ended December 31, 2018 compared to $13.2 million for the year ended December 31, 2017, representing a decrease of $5.7 million. These decreases were attributed to a reduction in sales volumes and related costs under the supply agreement with Globus.

Gross profit. Total gross profit was $63.2 million for the year ended December 31, 2018 compared to $68.2 million for the year ended December 31, 2017, representing a decrease of $5.0 million, or 7.3%.

Gross profit margin from U.S. product revenue was 75.0% for the year ended December 31, 2018 compared to 76.6% for the year ended December 31, 2017. The decrease is attributable to an increase in excess and obsolescence expense as we are launching newly developed products and phasing out older products.

Gross profit margin from international supply agreement revenue was 6.2% for the year ended December 31, 2018 compared to 11.0% for the year ended December 31, 2017. The changes in gross margin from other revenues was primarily related to the impact of fixed minimum royalty costs product mix, and to a lesser extent, decrease in average selling price for certain products.

Research and development expense. Research and development expense increased $5.1 million, or 104.1%, during the year ended December 31, 2018 compared to the year ended December 31, 2017. This increase was primarily related to the integration of the SafeOp technology into our product portfolio, including achievement of the first SafeOp milestone, an increase of personnel related costs as well as increased product development costs and related research expenses to support the alpha launch of our Kodiak and IdentiTi systems, which occurred in the fourth quarter of 2018. We expect research and development expenses to increase in future periods as we hire additional engineering and development talent, and continue to invest in our product pipeline.

Sales, general and administrative expense. Sales, general and administrative expense increased $2.5 million, or 3.6%, during the year ended December 31, 2018 compared to the year ended December 31, 2017. The increase for the year ended December 31, 2018 was primarily related to expenses with our newly acquired business entity SafeOp, marketing efforts including additional headcount to support the alpha launch of our new products OsseoScrew, Kodiak and IdentiTi. Additionally, our stock-based compensation, which includes additional equity awards to our distributors as we continue to focus on expanding our dedicated sales channel, increased in 2018, partially offset by lower instruments depreciation.  We expect our sales, general and administrative expenses to increase in absolute dollars in line with expected increase in our U.S. product revenue.

Litigation-related expenses. Litigation-related expenses of $5.7 million for the year ended December 31, 2018 and $0.3 million for the year ended December 31, 2017 are costs incurred for our ongoing litigation, primarily with NuVasive, Inc. We expect these expenses to decrease in future periods.

Amortization of acquired intangible assets. Amortization of acquired intangible assets was $0.7 million for both the year ended December 31, 2018 and for the year ended December 31, 2017. This expense represents amortization in the period for intangible assets associated with general business assets, intellectual property, licenses and other assets obtained in acquisitions and licensing agreements.

Transaction-related expenses. Transaction-related expenses of $1.6 million for the year ended December 31, 2018 are attributed to advisory and legal fees and other transaction costs incurred in connection with the SafeOp acquisition.

Gain on settlement. In February 2018, we reached a settlement agreement with Elite Medical Holdings and Pac 3 Surgical, pursuant to which we made a cash payment of $0.4 million as the final and total compensation under a collaboration agreement and related amendment between the Company and these third parties.  In addition, the parties agreed to release each other and waive any and all rights and claims arising from the collaboration agreement and amendment.  We recorded a gain of approximately $6.2 million for the year ended December 31, 2018, reflecting the reversal of accrued obligations previously recorded under the collaboration agreement.  

Restructuring expense.  Restructuring expense was $1.4 million for the year ended December 31, 2018 compared to $2.2 million for the year ended December 31, 2017. Beginning in late 2016 with the sale of our international business to Globus and continuing in 2018, we began a corporate initiative to rationalize our cost structure in line with our reduced operations and implemented a strategic repositioning of the Company, including the changeover of our senior leadership team, and have incurred related restructuring costs consisting primarily of severance and other personnel charges.

Gain on sale of assets.  During the year ended December 31, 2017, we recorded a net gain of $0.9 million pursuant to a sale of certain inventory and intellectual property to a third party for $1.0 million in consideration, payable via a credit to future minimum royalties owed to the third party under an existing exclusive license agreement.

41

---

Interest and other expense, net. Interest and other expense, net, decreased $0.5 million during the year ended December 31, 2018 compared to the year ended December 31, 2017, primarily due to lower average principal balances during 2018 due to the payoff of the MidCap Term Loan in August and the Globus facility in November, which had a higher interest rate compared to our Squadron Term Loan.

Loss on debt extinguishment. As part of the payoff of the Globus facility in the fourth quarter of 2018, the remaining balance of all amounts previously recorded as debt issuance costs of $0.6 million were recorded as a loss on debt extinguishment.

Gain on change in fair value of warrants.  Gain on change in fair value of warrants of $12.0 million in 2017 represented the reduction of the fair value of the warrants issued to certain investors during the period when such warrants were temporarily classified as a liability in the fourth quarter of 2017 as we were potentially required to settle the warrants with cash during this time. On December 29, 2017, the potential to cash settlement was alleviated when two board members who are warrant holders entered into recusal agreements, pursuant to which they agreed to abstain from voting on any fundamental transaction so long as their warrants are outstanding.  Accordingly, the warrants were re-classified to equity on December 29, 2017.

Income tax benefit. The income tax provision in continuing operations was a benefit of $1.4 million for the year ended December 31, 2018, compared to less than $0.1 million for the year ended December 31, 2017.  The 2018 income tax benefit from continuing operations primarily consists of the release of the valuation allowance regarding the SafeOp acquisition, partially offset by state taxes. The 2017 income tax benefit from continuing operations primarily consists of the reversal of an uncertain tax position and the recognition of refundable federal minimum tax credits, partially offset by state taxes. ASC 740-20 requires total income tax expense or benefit to be allocated among continuing operations, discontinued operations, extraordinary items, other comprehensive income and items charged directly to shareholders’ equity. This allocation is referred to as intra-period tax allocation. Accordingly, we are required to allocate the provision or benefit for income taxes between continuing operations and discontinued operations.  

Recognition of beneficial conversion feature. The recognition of beneficial conversion feature of $13.5 million is the calculated intrinsic value, which is measured as of the commitment date (i.e., the issuance date) of the Series B Preferred Stock, and required to be recorded as a discount in the Series B Preferred Stock with a corresponding entry to equity upon the Company obtaining stockholder approval of the transaction. Furthermore, due to the fact that the Series B Preferred Stock automatically converted into shares of the Company’s common stock upon obtaining stockholder approval, the full discount in the Series B Preferred Stock that was created by the recognition of the beneficial conversion feature is fully accreted as a deemed dividend which increases the Company’s accumulated deficit and net loss attributable to common shareholders.

Liquidity and Capital Resources

We have incurred significant net losses since inception and relied on our ability to fund our operations through revenues from the sale of our products, debt financings and equity financings, including our private placement in March 2018 (“2018 Private Placement”). As we have incurred losses, a successful transition to profitability is dependent upon achieving a level of revenues adequate to support our cost structure. This may not occur and, unless and until it does, we will continue to need to raise additional capital. At December 31, 2018, our principal sources of liquidity consisted of cash of $29.1 million and accounts receivable (net) of $15.1 million. We believe that our current available cash, combined with the availability of our expanded credit facility with Squadron Capital (described below) and draws on our revolving credit facility, will be sufficient to fund our planned expenditures and meet our obligations for at least 12 months following our financial statement issuance date.  

Historically, our principal sources of cash have included customer payments from the sale of our products, proceeds from the issuance of common and preferred stock and proceeds from the issuance of debt. Our principal uses of cash have included cash used in operations, payments relating to purchases of surgical instruments, repayments of borrowings under the Amended Credit Facility, payments due under the Orthotec settlement agreement and acquisitions of businesses and intellectual property rights. We expect that our principal uses of cash in the future will be similar. We expect that, as our revenues grow, our sales and marketing, research and development expenses and our capital expenditures will continue to grow and, as a result, we will need to generate significant net revenues to achieve profitability.  Operating losses and negative cash flows may continue for at least the next year as we continue to incur costs related to the execution of our operating plan and introduction of new products.

In March 2018, we entered into financing transactions to raise an aggregate of $50 million, through a $45.2 million private placement of Series B Convertible Preferred Stock and warrants exercisable for common stock, and a warrant exercise agreement with a holder of an existing warrant for an aggregate consideration of $4.8 million, generating net proceeds of $47.3 million. We paid $15.1 million of the net proceeds to fund the cash portion of the purchase price for SafeOp.

On November 6, 2018, we closed the $35.0 million Term Loan with Squadron, a provider of debt financing to growing companies in the orthopedic industry.  Net proceeds of approximately $34.1 million were used to retire our existing $29.2 million term debt with Globus.  The remainder of the proceeds are being used for general corporate purposes.

42

---

On March 27, 2019, we closed on an Expanded Credit Facility with Squadron for up to $30 million in additional secured financing. This additional financing will be made available under our existing credit facility with Squadron. No amounts have been drawn on the Line of Credit as of its issuance date. Any amounts drawn will be used for general corporate purposes.  The additional borrowings under the credit facility will mature concurrent with the current secured financing from Squadron and bear interest at LIBOR plus 8% per annum, subject to a 10% floor and a 13% ceiling. For any draws taken, interest-only payments are due monthly through May 2021, followed by principal payable in 29 equal monthly installments beginning June 2021 and a lump-sum payment payable at maturity in November 2023.

We may seek additional funds from public and private equity or debt financings, borrowings under new or existing debt facilities or other sources to fund our projected operating requirements.  However, there is no guarantee that we will be able to obtain further financing, or do so on reasonable terms. If we are unable to raise additional funds on a timely basis, or at all, we would be materially adversely affected. As more fully described below, our debt agreements include traditional lending and reporting covenants, including a financial covenant that requires us to maintain a minimum fixed charge coverage ratio beginning in April 2020 and a minimum liquidity covenant of $5.0 million effective through March 2020.  Should at any time we fail to maintain compliance with these covenants, we will need to seek waivers or amendments to the debt agreements. If we are unable to secure such waivers or amendments, we may be required to classify our obligations under the debt agreements in current liabilities on our consolidated balance sheet. We may also be required to repay all or a portion of outstanding indebtedness under the debt agreements, which would require us to obtain further financing. 

A substantial portion of our available cash funds is held in business accounts with reputable financial institutions. At times, however, our deposits, may exceed federally insured limits and thus we may face losses in the event of insolvency of any of the financial institutions where our funds are deposited. We did not hold any marketable securities as of December 31, 2018.

Amended Credit Facility, Squadron Credit Agreement and Other Debt

Our Amended Credit Facility with MidCap provides for a revolving credit commitment up to $22.5 million. As of December 31, 2018, $11.0 million was outstanding under the revolving line of credit. The term loan with MidCap was paid in full during the third quarter of 2018.

On March 8, 2018, we entered into a Seventh Amendment to the Amended Credit Facility to extend the date that the financial covenants of the Amended Credit Facility are effective from April 2018 to April 2019, and established a minimum liquidity covenant of $5.0 million through March 31, 2019. Subsequently, on November 6, 2018, we entered into an Eighth Amendment to the Amended Credit Facility to extend the date that the financial covenants of the Amended Credit Facility are effective from April 2019 to April 2020, and extended the minimum liquidity covenant through March 2020. The Company was in compliance with the covenants under the Amended Credit Facility at December 31, 2018.

The revolving line of credit accrues interest at LIBOR plus 6.0%, reset monthly. At December 31, 2018, the revolving line of credit carried an interest rate of 8.35%. The borrowing base is determined based on the value of domestic eligible accounts receivable. As collateral for the Amended Credit Facility, MidCap has a first lien security interest in accounts receivable and a second lien on substantially all other assets. The Amended Credit Facility also includes several event of default provisions, such as payment default, insolvency conditions and a material adverse effect clause, which could cause interest to be charged at a rate which is up to five percentage points above the rate effective immediately before the event of default or result in MidCap’s right to declare all outstanding obligations immediately due and payable.

On September 1, 2016, we entered into the Globus facility, pursuant to which Globus agreed to loan us up to $30 million. We made an initial draw of $25 million under the Globus facility with an additional draw of $5 million made in the fourth quarter of 2016. In November 2018, the $29.2 million outstanding was paid in full.

43

---

On November 6, 2018, we closed the $35.0 million Term Loan with Squadron for net proceeds of approximately $34.1 million, which were partially used to retire our existing $29.2 million term debt with Globus noted above. The debt has a five-year maturity and bears interest at LIBOR plus 8% (10.5% as of December 31, 2018) per annum. The Agreement specifies a minimum interest rate of 10% and a maximum of 13% per year. Interest-only payments are due monthly through May 2021, followed by $10 million in principal payable in 29 equal monthly installments beginning June 2021 and a $25 million lump-sum payment payable at maturity in November 2023. As collateral for the Term Loan, Squadron has a first lien security interest in substantially all assets except for accounts receivable.

The Term Loan also includes several event of default provisions, such as payment default, insolvency conditions and a material adverse effect clause, which could cause interest to be charged at a rate which is up to five percentage points above the rate effective immediately before the event of default or result in Squadron’s right to declare all outstanding obligations immediately due and payable. Furthermore, the credit agreement contains various covenants, including various negative covenants including a $5 million minimum liquidity requirement through March 31, 2020. The minimum liquidity covenant will be replaced by a fixed charge ratio, pursuant to which operating cash to fixed charges (as defined) must equal at least 1:1 on a rolling 12-month basis, beginning April 2020. We were in compliance with the covenants under the credit agreement at December 31, 2018.

As of December 31, 2018, we have made $36.2 million in Orthotec settlement payments and there remains an aggregate $21.6 million of Orthotec settlement payments (including interest) to be paid by us.

Operating Activities

We used net cash of $25.6 million from operating activities for the year ended December 31, 2018. During this period, net cash used in operating activities consisted of our net loss adjusted for non-cash adjustments including amortization, depreciation, stock-based compensation, provision for doubtful accounts, provision for excess and obsolete inventory, interest expense related to amortization of debt discount and issuance costs, and contingent consideration fair market value adjustment of $15.9 million and working capital and other assets used cash of $9.7 million.

44

---

Investing Activities

We used cash of $21.7 million in investing activities for the year ended December 31, 2018, primarily for the acquisition of SafeOp of a net amount of $15.1 million and the purchase of surgical instruments, computer equipment, furniture and fixture of $6.5 million, the acquisition of intangible assets of $0.4 million, net of $0.3 million of cash received from sale of instruments and disposal of equipment.

Financing Activities

Financing activities provided net cash of $53.9 million for the year ended December 31, 2018, primarily attributable to the 2018 Private Placement and warrant exercises, which provided net cash proceeds of $51.9 million and the receipt of the Squadron Term Loan of $34.1 million, net. We used cash to pay the remaining balance of our Globus facility along with other notes payable of $32.5 million. Under the MidCap Amended Credit Facility, we made net borrowings under the lines of credit of $0.5 million during the year ended December 31, 2018 and principal payments on notes payable and capital leases totaling $0.1 million.

Contractual obligations and commercial commitments

Total contractual obligations and commercial commitments as of December 31, 2018 are summarized in the following table (in thousands):

 

 

 

Real Property Leases

In January 2016, we entered into a lease agreement, or the Building Lease, for office, engineering, and research and development space in Carlsbad, California with the lease term through July 31, 2021. Under the Building Lease our monthly rent payable is approximately $105,000 per month during the first year and increases by approximately $3,000 each year thereafter.

Off-Balance Sheet Arrangements

As of December 31, 2018, we did not have any off-balance sheet arrangements.

45

---

Critical Accounting Policies and Estimates

Our discussion and analysis of our financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the U.S. The preparation of these financial statements requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues, expenses and related disclosures. On an on-going basis, we evaluate our estimates and assumptions, including those related to revenue recognition, allowances for accounts receivable, inventories and intangible assets, stock-based compensation and income taxes. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumption conditions.

We believe the following accounting policies to be critical to the judgments and estimates used in the preparation of our consolidated financial statements.

Revenue Recognition

The Company recognizes revenue from products sales in accordance with Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) Topic 606, Revenue from Contracts with Customers (“Topic 606”). The adoption of this guidance did not have a material impact on the Company’s consolidated financial statements. This standard applies to all contracts with customers, except for contracts that are within the scope of other standards, such as leases, insurance, collaboration arrangements and financial instruments.  Under Topic 606, an entity recognizes revenue when its customer obtains control of promised goods or services, in an amount that reflects the consideration that the entity expects to receive in exchange for those goods or services.  To determine revenue recognition for arrangements that an entity determines are within the scope of Topic 606, the entity performs the following five steps: (i) identify the contract(s) with a customer; (ii) identify the performance obligations in the contract; (iii) determine the transaction price; (iv) allocate the transaction price to the performance obligations in the contract; and (v) recognize revenue when (or as) the entity satisfies a performance obligation.  The Company only applies the five-step model to contracts when it is probable that the entity will collect the consideration it is entitled to in exchange for the goods or services it transfers to the customer.  At contract inception, once the contract is determined to be within the scope of Topic 606, the Company assesses the goods or services promised within each contract and determines those that are performance obligations, and assesses whether each promised good or service is distinct.  The Company then recognizes as revenue the amount of the transaction price that is allocated to the respective performance obligation when (or as) the performance obligation is satisfied.

Valuation of Intangible Assets

We assess the impairment of our intangible assets annually in December or whenever business conditions change and an earlier impairment indicator arises. This assessment requires us to make assumptions and judgments regarding the carrying value of these assets. These assets are considered to be impaired if we determine that their carrying value may not be recoverable based upon our assessment of certain events or changes in circumstances, including the following:

If the assets are considered to be impaired, the impairment we recognize is the amount by which the carrying value of the assets exceeds the fair value of the assets. Significant management judgment is required in estimating the fair value of our intangible assets.

Warrants to purchase common stock

Warrants are accounted for in accordance with the applicable accounting guidance provided in ASC 815 - Derivatives and Hedging as either derivative liabilities or as equity instruments depending on the specific terms of the agreements.  Liability-classified instruments are recorded at fair value at each reporting period with any change in fair value recognized as a component of change in fair value of derivative liabilities in the consolidated statements of operations. We estimate liability classified instruments using the Black Scholes model, which requires management to develop assumptions and inputs that have significant impact on such valuations. 

During each reporting period, we evaluate changes in facts and circumstances that could impact the classification of warrants from liability to equity, or vice versa.

46

---

Stock-Based Compensation

We account for stock-based compensation under provisions which require that share-based payment transactions with employees be recognized in the financial statements based on their fair value and recognized as compensation expense over the vesting period. The amount of expense recognized during the period is affected by subjective assumptions, including estimates of our future volatility, the expected term for our stock options, the number of options expected to ultimately vest, and the timing of vesting for our share-based awards.

We use a Black-Scholes option-pricing model to estimate the fair value of our stock option awards. The calculation of the fair value of the awards using the Black-Scholes option-pricing model is affected by our stock price on the date of grant as well as assumptions regarding the following:

We use historical data to estimate the number of future stock option forfeitures. Share-based compensation recorded in our consolidated statements of operations is based on awards expected to ultimately vest and has been reduced for estimated forfeitures. Our estimated forfeiture rates may differ from our actual forfeitures which would affect the amount of expense recognized during the period.

We account for stock option grants to non-employees under provisions which require that the fair value of these instruments be recognized as an expense over the period in which the related services are rendered.

Share-based compensation expense of awards with performance conditions is recognized over the period from the date the performance condition is determined to be probable of occurring through the time the applicable condition is met. Determining the likelihood and timing of achieving performance conditions is a subjective judgment made by management which may affect the amount and timing of expense related to these share-based awards. Share-based compensation is adjusted to reflect the value of options which ultimately vest as such amounts become known in future periods. As a result of these subjective and forward-looking estimates, the actual value of our share-based awards could differ significantly from those amounts recorded in our financial statements. 

Stock-based awards with market conditions are valued using the Monte Carlo valuation technique which requires management to make significant estimates and assumptions that are not observable from the market. Stock based compensation for awards with both service and market conditions are recognized on a straight line basis over the longer of the derived service period or the requisite service period.  

 

Income Taxes

We account for income taxes in accordance with provisions which set forth an asset and liability approach that requires the recognition of deferred tax assets and deferred tax liabilities for the expected future tax consequences of temporary differences between the carrying amounts and the tax bases of assets and liabilities. Valuation allowances are established when necessary to reduce deferred tax assets to the amount that is more likely than not expected to be realized. In making such a determination, a review of all available positive and negative evidence must be considered, including scheduled reversal of deferred tax liabilities, projected future taxable income, tax planning strategies, and recent financial performance.

We recognize interest and penalties related to uncertain tax positions as a component of the income tax provision.

47

---

Recent Accounting Pronouncements

See “Notes to Financial Statements - Note 2 - Recent Accounting Pronouncements” included elsewhere in this Annual Report on Form 10-K.

Interest Rate Risk

Other outstanding debt consists of fixed rate instruments, including debt outstanding under the Amended Credit Facility with MidCap and the Term Loan with Squadron, notes payable and capital leases.

Our borrowings under our credit facilities expose us to market risk related to changes in interest rates. As of December 31, 2018, our outstanding floating rate indebtedness totaled $46.0 million. The primary base interest rate is the LIBOR rate. Assuming the outstanding balance on our floating rate indebtedness remains constant over a year, a 100 basis point increase in the interest rate would decrease pre-tax income and cash flow by approximately $0.5 million.

 

The consolidated financial statements and supplementary data required by this item are set forth at the pages indicated in Item 15.

None.

MANAGEMENT’S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING

Background

On March 8, 2018, we completed a private placement of equity securities to certain institutional and accredited investors, providing for the sale by us of newly designated Series B Convertible Preferred Stock, which shares of preferred stock were automatically converted into 14.3 million shares of our common stock upon approval by our stockholders.  As the Series B Convertible Preferred Stock provided the holder the benefit to convert to shares of common stock, a beneficial conversion feature (“BCF”) with a calculated intrinsic fair value at issuance of $13.5 million existed as of the date the shares of Series B Convertible Preferred Stock were able to be converted into shares of common stock. As the conversion was contingent upon shareholder approval, which occurred in May 2018, the BCF should have been recognized on the day the contingency was resolved.

 

This one-time, non-cash deemed dividend impacted net loss attributable to common stockholders and net loss per share for the three and six months ended June 30, 2018, the nine months ended September 30, 2018, and the year ended December 31, 2018. The error also impacted the amounts in accumulated deficit and additional paid in capital, but had no impact on total equity. We determined that the impact of this accounting error was not material to the financial statements for prior unaudited interim periods. We recorded the impact of the BCF in our audited financial statements as of and for the year ended December 31, 2018.

 

In connection with our review of the foregoing, we identified a lack of sufficient oversight and review to ensure the complete and proper application of U.S. GAAP as it relates to the impact of complex equity transactions on our financial statements as of June 30, 2018, September 30, 2018 and as of December 31, 2018.

Evaluation of Disclosure Controls and Procedures

Under the supervision and with the participation of our management, including our Chief Executive Officer and our Chief Financial Officer, we carried out an evaluation of the effectiveness of our disclosure controls and procedures (as such term is defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) as of the end of the period covered by this report. Based on such evaluation, our management, including our Chief Executive Officer and Chief Financial Officer, has concluded that our disclosure controls and procedures were not effective at a reasonable assurance level for the interim periods ended and as of June 30, 2018 and September 30, 2018 and as of December 31, 2018. This conclusion was based on the material weakness identified in our internal control over financial reporting related to our lack of sufficient oversight and review to ensure the complete and proper application of U.S. GAAP associated with complex equity transactions. We identified and reported this weakness to both the Audit Committee of our Board of

48

---

Directors. A material weakness existed as of December 31, 2018 that was remediated during the first quarter 2019 prior to filing this Form 10-K.

Internal Control Over Financial Reporting

Our management is responsible for establishing and maintain adequate internal control over financial reporting (as defined in Exchange Act Rules 13(a)—15(f). Our management’s annual report on internal control over financial reporting is set forth below.

Management’s Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over our financial reporting. Internal control over financial reporting refers to the process designed by, or under the supervision of, our Chief Executive Officer and Chief Financial Officer, and effected by our Board of Directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.

Because of its inherent limitations, internal control over financial reporting cannot provide absolute assurance of achieving financial reporting objectives. Internal control over financial reporting is a process that involves human diligence and compliance and is subject to lapses in judgment and breakdowns resulting from human failures. Internal control over financial reporting also can be circumvented by collusion or improper management override. Because of such limitations, there is a risk that material misstatements may not be prevented or detected on a timely basis by internal control over financial reporting. However, these inherent limitations are known features of the financial reporting process. Therefore, it is possible to design into the process safeguards to reduce, though not eliminate, this risk. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become ineffective because of changes in conditions or that the degree of compliance with established policies or procedures may deteriorate.

Our management, under the supervision of, our Chief Executive Officer and Chief Financial Officer, assessed the effectiveness of our internal control over financial reporting as of December 31, 2018 using the framework set forth in the report entitled Internal Control—Integrated Framework published by the Committee of Sponsoring Organizations (COSO) of the Treadway Commission. Management reviewed the results of this evaluation with the Audit Committee of our Board of Directors, and based on this evaluation, management identified deficiencies related to our review and accounting associated with significant non-routine transactions.

During the preparation process for our 2018 Annual Report on Form 10-K, we identified an error in our previously issued consolidated interim financial statements for the quarterly periods ended June 30, 2018 and September 30, 2018 related to the accounting for a beneficial conversion feature associated with our Series B Convertible Preferred Stock which converted into shares of common stock in May 2018.  Specifically, management has concluded the material weakness in our internal control over financial reporting related to a lack of sufficient oversight and review to ensure the complete and proper application of U.S. GAAP associated with complex equity transactions.

Remediation of the Material Weakness during the first quarter 2019, prior to filing this Form 10-K

This material weakness related to a lack of sufficient oversight and review to ensure the complete and proper application of U.S. GAAP associated with complex equity transactions. To remediate the material weakness described above and to prevent similar deficiencies in the future, we added additional controls and procedures, including:

 

Any actions we have taken or may take to remediate these deficiencies are subject to continued management review supported by testing, as well as oversight by the Audit Committee of our Board of Directors. We cannot assure you that material weaknesses or significant deficiencies will not occur in the future and that we will be able to remediate such weaknesses or deficiencies in a timely manner, which could impair our ability to accurately and timely report our financial position, results of operations or cash flows. See the related Risk Factor included in this Annual Report on Form 10-K.

Changes in Internal Control over Financial Reporting

Except as described above, there has been no change to our internal control over financial reporting during our most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

 

49

---

Concurrently with the adoption of an amendment of the Company’s 2016 Equity Incentive Plan (the “Plan”) to increase the annual per person limit on awards granted thereunder on October 25, 2018 disclosed in the Company’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2018, the Board of Directors of the Company (the “Board”) ratified grants made to one individual in July 2018 (the “July Grants”) that exceeded the annual per person limit as originally set forth under the Plan (the “October Resolutions”).  By resolution on March 6, 2019, the Board clarified its actions in the October Resolutions to avoid any uncertainty related to its actions, resolving that, by approving the October Resolutions, the Board (1) ratified the July Grants, including the excess over the original limits, as of and effective on July 30, 2018; (2) ratified the amendment of the original limits under the Plan to the extent necessary to permit the ratification of the July Grants, including the excess over the original limits, in their entirety, as of and effective on July 30, 2018; and (3) approved an additional amendment to Section 3(c) of the Plan to increase the individual limit set forth therein to 1,250,000 shares, as of and effective on October 25, 2018.

The statutory notice under Section 204 of the Delaware General Corporation Law to the Company’s stockholders is set forth in Exhibit 99.1 hereto and incorporated by reference herein.

On March 27, 2019, Alphatec Holdings, Alphatec Spine and SafeOp Surgical, as borrowers, and Squadron, as lender, entered into a First Amendment to Credit, Security and Guaranty Agreement, pursuant to which Squadron extended an additional $30 million in draws available to us under our credit facility with Squadron beginning on March 27, 2019 through November 2023. In connection with the amendment of our credit facility with Squadron, we also entered into an Amended and Restated Note to effect the increase of the available borrowing. Any additional borrowings will be subject to the same terms as the credit agreement we entered into with Squadron in November 2018.  No amounts have been drawn on the expanded credit facility as of its issuance date. Any amounts drawn will be used for general corporate purposes. The additional borrowings under the credit facility will mature concurrent with the current secured financing from Squadron and bear interest at LIBOR plus 8% per annum, subject to a 10% floor and a 13% ceiling. For any draws taken, interest-only payments are due monthly through May 2021, followed by principal payable in 29 equal monthly installments beginning June 2021 and a lump-sum payment payable at maturity in November 2023. At such time as the Company makes its first draw under the additional available borrowing, the Company will issue to Squadron warrants to purchase 4.8 million shares of the Company’s common stock at an exercise price of $2.17 per share. Upon issuance, the warrants will have a seven-year term and will be immediately exercisable.

In connection with the expansion of our credit facility with Squadron, on March 27. 2019 we also entered into a Ninth Amendment to Amended and Restated Credit, Security and Guaranty Agreement with MidCap to acknowledge and consent to the additional available borrowing under the Squadron credit facility.

The foregoing description does not purport to be complete and is qualified in its entirety by reference to the First Amendment to Credit, Security and Guaranty Agreement, and the Ninth Amendment to Amended and Restated Credit, Security and Guaranty Agreement, copies of which will be filed with the Company’s Quarterly Report on Form 10-Q for the fiscal quarter ended March 31, 2019.

 

 

 

50

---

PART III

The information required by this item is incorporated herein by reference to our Proxy Statement with respect to our 2019 Annual Meeting of Stockholders to be filed with the SEC within 120 days of the end of the fiscal year covered by this Annual Report on Form 10-K.

The information required by this item is incorporated herein by reference to our Proxy Statement with respect to our 2019 Annual Meeting of Stockholders to be filed with the SEC within 120 days of the end of the fiscal year covered by this Annual Report on Form 10-K.

The information required by this item is incorporated herein by reference to our Proxy Statement with respect to our 2019 Annual Meeting of Stockholders to be filed with the SEC within 120 days of the end of the fiscal year covered by this Annual Report on Form 10-K.

Item 13.Certain Relationships and Related Transactions, and Director Independence

The information required by this item is incorporated herein by reference to our Proxy Statement with respect to our 2019 Annual Meeting of Stockholders to be filed with the SEC within 120 days of the end of the fiscal year covered by this Annual Report on Form 10-K.

The information required by this item is incorporated herein by reference to our Proxy Statement with respect to our 2019 Annual Meeting of Stockholders to be filed with the SEC within 120 days of the end of the fiscal year covered by this Annual Report on Form 10-K.

51

---

PART IV

Item 15 (a) The following documents are filed as part of this Annual Report on Form 10-K:

 

(1) Financial Statements:

 

 

Item 15(a)(3) Exhibits List

The following is a list of exhibits filed as part of this Annual Report on Form 10-K.